tow Citroen C4 DAG 2014.5 2.G Owner's Manual

10 
Eco-driving is a  range  of  everyday  practices  that  allow  the  motorist  to  optimise  their  fuel  consumption  and  CO2 emissions.
Optimise the use of your gearbox
With a manual  gearbox,  move  of f  gently  and  change  up  without
  waiting.   During   acceleration   change   up   early.
With
 
an
 
automatic
 
or
 
electronic
 
gearbox,
 
give
 
preference
 
to
 
automatic

 
mode
 
and
 
avoid
 
pressing
 
the
 
accelerator
 
pedal
 
heavily

  or   suddenly.
Drive smoothly
Maintain a  safe  distance  between  vehicles,  use  engine  braking
 rather  than  the  brake  pedal,  and  press  the  accel -
erator
 
progressively
.  
These
 
practices
 
contribute
 
towards
 
a
 
reduction

  in   fuel   consumption   and   CO
2 emissions and also helps
 
reduce
 
the
 
background
 
traffic
 
noise.
If
 
your

 
vehicle

 
has

 
cruise

 
control,

 
make

 
use
 
of
 
the
 
system
 
at speeds

 
above

 
25

 
mph

 
(40

 
km/h)

 
when

 
the
 
traffic
 
is
 
flowing well.
Control the use of your electrical equipment
Before moving  of f,  if  the  passenger  compartment  is  too  warm,
 ventilate  it  by  opening  the  windows  and  air  vents  
before

  using   the   air   conditioning.
Above
 
30
 
mph
 
(50
 
km/h),
 
close
 
the
 
windows
 
and
 
leave
 
the
 
air

  vents   open.
Remember
 
to
 
make
 
use
 
of
 
equipment
 
that
 
can
 
help
 
keep
 
the

 
temperature
 
in
 
the
 
passenger
 
compartment
 
down
 
(sun
-
roof
  and   window   blinds...).
Switch
 
of
f  
the
 
air
 
conditioning,
 
unless
 
it
 
has
 
automatic
 
regu
-
lation,
  as   soon   as   the   desired   temperature   is   attained.
Switch
 
of
f  
the
 
demisting
 
and
 
defrosting
 
controls,
 
if
 
not
 
au
-
tomatic.
Switch
  off   the   heated   seat   as   soon   as   possible.
Switch
 
of
f  
the
 
headlamps
 
and
 
front
 
foglamps
 
when
 
the
 
level of

  light   does   not   require   their   use.
Avoid
 
running
 
the
 
engine
 
before
 
moving
 
of
f,  
particularly
 
in
 
winter;

 
your
 
vehicle
 
will
 
warm
 
up
 
much
 
faster
 
while
 
driving.
As

 
a
 
passenger
,  
if
 
you
 
avoid
 
connecting
 
your
 
multimedia
 
devices

 
(film,
 
music,
 
video
 
game...),
 
you
 
will
 
contribute
 
to
-
wards
 
limiting
 
the
 
consumption
 
of
 
electrical
 
energy
,  
and
 
so
 
of

  fuel.
Disconnect
 
your
 
portable
 
devices
 
before
 
leaving
 
the
 
ve
-
hicle.
ECO-DRIVING
The gear  shift  indicator  invites  you  engage  the  most  suit -
able  gear:  as  soon  as  the  indication  is  displayed  in  the  in -
strument
  panel,   follow   it   straight   away.
For
 
vehicles
 
fitted
 
with
 
an
 
electronic
 
or
 
automatic
 
gearbox,
 
this

  indicator   appears   only   in   manual   mode.

20 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Warning/indicator lampis onCause Action/Observations
Anti-lock Braking
System (ABS) fixed.
The
  anti-lock   braking   system  
has

  a   fault.The
  vehicle   retains   conventional   braking.
Drive
  carefully   at   reduced   speed   and  
contact

  a   CITROËN   dealer   or   a   qualified  
workshop

  without   delay.
Engine
autodiagnosis system flashing.
The
  engine   management  
system

  has   a   fault.Risk
  of   destruction   of   the   catalytic   converter.
Have
  it   checked   by   a   CITROËN   dealer   or   a
 qualified

  workshop.
fixed. The
  emission   control   system  
has

  a   fault.The
  warning   lamp   should   go   off   when   the
 engine

  is   started.
If
  it   does   not   go   off,   contact   a   CITROËN
 dealer

  or   qualified   workshop   without   delay.
Low fuel level fixed,
 
accompanied

 
by

  and   audible  
signal

  and   a  
message.When

  it   first   comes   on   there  
remains

  approximately  
6

litres   of   fuel   in   the   tank.
At
  this   point,   you   begin   to   use  
the

  fuel   reserve.Refuel
  as   soon   as   possible   to   avoid  
running

  out   of   fuel.
Until
  sufficient   fuel   is   added,   this   warning  
lamp

  will   come   on   every   time   the   ignition  
is

  switched   on,   accompanied   by   an  
audible

  signal   and   a   message.  
This

  audible   signal   and   message   are  
repeated

  with   increasing   frequency   as  
the

  fuel   level   drops   towards   "0".
Fuel
  tank   capacity:   approximately  
60

litres.
Never
  continue   to   drive   until   you   run  
out

  of   fuel,   as   this   could   damage   the  
emission

  control   and   injection   systems.
1
MONITORING

25 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Operation indicator lamps
If  one   of   the   following   indicator   lamps   comes   on,   this   confirms   that   the   corresponding   system   has   come   into   operation.
It
  may   be   accompanied   by   an   audible   signal   and   a   message   in   the   screen.
Warning/indicator lamp is onCause Action/Observations
Left-hand direction
indicator flashing
  with  
buzzer

.The
  lighting   stalk   is   pushed  
down.
Right-hand direction
indicator flashing

  with  
buzzer

.The
  lighting   stalk   is   pushed   up.
Hazard warning lamps flashing
  with  
audible

  signal.The
  hazard   warning   lamps
 switch,

  located   on   the
 dashboard,

  has   been   operated.The
  left-hand   and   right-hand   direction  
indicators

  and   their   associated   indicator  
lamps

  flash   simultaneously.
Sidelamps fixed.The
  lighting   stalk   is   in   the  
"Sidelamps"

  position.
Dipped beam headlamps fixed.The
  lighting   stalk   is   in   the  
"Dipped

  beam   headlamps"  
position

  or   in   the   "AUTO"  
position

  in   conditions   of   low  
light.
Main beam
headlamps fixed.The

  lighting   stalk   is   pulled  
towards

  you.Pull
  the   stalk   again   to   return   to   dipped  
beam

  headlamps.
Front foglamps fixed.The
  front   foglamps   are  
switched

  on   using   the   ring   on  
the

  lighting   control   stalk.Turn
  the   ring   on   the   lighting   control   stalk  
rearwards

  twice   to   switch   off   the   front  
foglamps.
Rear foglamps fixed. The

  rear   foglamps   are   on.Turn
  the   ring   on   the   stalk   rearward   to   turn  
of

f   the   rear   foglamps.
1
MONITORING

33
48 
C4-2_en_Chap03_confort_ed01-2014
RECOMMENDATIONS FOR VENTILA TION AND AIR CONDITIONING
In order for  these  systems  to  be  fully  ef fective,  follow  the  operation  and  maintenance
  guidelines   below:
F
 
T
o  
obtain
 
an
 
even
 
air
 
distribution,
 
take
 
care
 
not
 
to
 
obstruct
 
the
 
exterior
 
air

 
intake
 
grille
s  
located
 
at
 
the
 
base
 
of
 
the
 
windscreen,
 
the
 
nozzles,
 
the
 
vents

 
and
 
the
 
air
 
outlets,
 
as
 
well
 
as
 
the
 
air
 
extractor
 
located
 
in
 
the
 
boot.
F

 
Do
 
not
 
cover
 
the
 
sunshine
 
sensor
,  
located
 
on
 
the
 
dashboard;
 
this
 
is
 
used

  for   regulation   of   the   air   conditioning   system.
F
 
Operate
 
the
 
air
 
conditioning
 
system
 
for
 
at
 
least
 
5
 
to
 
10
 
minutes,
 
once
 
or
 
twice

  a   month   to   keep   it   in   perfect   working   order.
F
 
Ensure
 
that
 
the
 
passenger
 
compartment
 
filter
 
is
 
in
 
good
 
condition
 
and
 
have

  the   filter   elements   replaced   regularly.
  W

e  
recommend
 
the
 
use
 
of
 
a
 
combined
 
passenger
 
compartment
 
filter
.  
Thanks

 
to
 
its
 
special
 
active
 
additive,
 
it
 
contributes
 
to
 
the
 
purification
 
of
 
the

 
air
 
breathed
 
by
 
the
 
occupants
 
and
 
the
 
cleanliness
 
of
 
the
 
passenger
 
compartment

 
(reduction
 
of
 
allergic
 
symptoms,
 
bad
 
odours
 
and
 
greasy
 
deposits).
F

 
T
o  
ensure
 
correct
 
operation
 
of
 
the
 
air
 
conditioning
 
system,
 
you
 
are
 
also
 
advised

 
to
 
have
 
it
 
checked
 
regularly
 
as
 
recommended
 
in
 
the
 
mainte
-
nance
  and   warranty   guide.
F
 
If
 
the
 
system
 
does
 
not
 
produce
 
cold
 
air
,  
switch
 
it
 
of
f  
and
 
contact
 
a
 
CITROËN

  dealer   or   a   qualified   workshop.
When
 
towing
 
the
 
maximum
 
load
 
on
 
a
 
steep
 
gradient
 
in
 
high
 
temperatures,
 
switching

 
of
f  
the
 
air
 
conditioning
 
increases
 
the
 
available
 
engine
 
power
 
and
 
so

  improves   the   towing   ability. If
 
after
 
an
 
extended
 
stop
 
in
 
sun
-
shine,  
the
 
interior
 
temperature
 
is
 very
 high,  first  ventilate  the  pas -
senger  compartment  for  a  few  moments.
Put
 
the
 
air
 
flow
 
control
 
at
 
a
 
set
-
ting
 
high
 
enough
 
to
 
quickly
 
change

 
the
 
air
 
in
 
the
 
passenger
 
compartment.
The

 
air
 
conditioning
 
system
 
does

 
not
 
contain
 
chlorine
 
and
 
does

 
not
 
present
 
any
 
danger
 
to
 
the

  ozone   layer.
The
 
condensation
 
created
 
by
 
the

 
air
 
conditioning
 
results
 
in
 
a
 
discharge

 
of
 
water
 
under
 
the
 
ve
-
hicle
  which   is   perfectly   normal.
Stop & Start
The
 
heating
 
and
 
air
 
conditioning
 
systems
 
only
 
work
 
when
 
the
 
engine
 
is
 
running.

 
T
o  
maintain
 
a
 
comfortable
 
temperature
 
in
 
the
 
passenger
 
compart
-
ment,
 
you
 
can
 
temporarily
 
deactivate
 
the
 
Stop
 
&
 
Start
 
system
 
(see
 
the
 
corresponding

  section).
COMFORT

33
54 
C4-2_en_Chap03_confort_ed01-2014
9. "REST" function: ventilation with
the engine off
On switching on the engine
-
 
The
 
control
 
screens
 
come
 
on:
 
the
 
function

  is   available.
-
 
Pressing
 
the
 
REST
button activates
the
 
ventilation
 
for
 
a
 
few
 
minutes.
 
a
ctivation of the function is con-
firmed
 
by
 
the
 
display
 
of
 
two
 
dashes
 
in

 
the
 
control
 
screens
 
and
 
four
 
air
 
flow

  level   indicator   lamps.
-
 
The
 
function
 
can
 
be
 
deactivated
 
and
 
reactivated

 
if
 
the
 
control
 
screens
 
are

  on.
-
 
The
 
screens
 
go
 
of
f  
at
 
the
 
end
 
of
 
this
 
period.Even

 
with
 
the
 
engine
 
is
 
of
f,  
you can operate the ventila

-
tion
  for   a   few   minutes.
For
 
example,
 
while
 
you
 
are
 
away

 
from
 
the
 
vehicle,
 
the
 
passengers

 
can
 
still
 
enjoy
 
some
 
air
 
cir
-
culation
 
without
 
having
 
the
 
engine
 
run
-
ning.
This
 
function
 
is
 
available
 
after
 
switching
 
on

 
the
 
ignition,
 
as
 
well
 
as
 
after
 
stopping
 
the

  engine.
The
 
period
 
that
 
the
 
function
 
is
 
available
 
depends

 
on
 
the
 
state
 
of
 
charge
 
of
 
the
 
battery

.
You can activate the "REST" func-
tion
 
while
 
the
 
air
 
conditioning
 
control
 
screens

  are   on.
7. Air flow adjustment
F

T

urn this control to the left
to
 
decrease

 
the

 
air

 
flow

 
or

 
to

 
the

 
right

 
to

 
increase

 
the

 
air

 
flow.
The
 
air

 
flow

 
indicator

 
lamps,

 
between

 
the

 
two

 
fans,

 
come

 
on

 
progressively

 
in

 
relation

 
to
 
the
 
value
 
requested.
5. Air conditioning On / Off
F

Press

this button to switch
off
 
the
 
air
 
conditioning.
Switching
 
the

 
system

 
of

f
 
could

 
result

 
in

 
discomfort

 
(humidity,
 
condensation).
F
 
Press

 
this

 
button

 
again

 
to

 
return

 
to

 
automatic

 
operation

 
of

 
the

 
air

 
con

-
ditioning.
 
The

 
indicator

 
lamp

 
on

 
the

 
"A/C"

 
button
 
comes
 
on.
F
 
Press

 
one

 
or

 
more

 
but

-
tons
 
to

 
direct

 
the

 
air

 
flow

 
towards:
6.

Air distribution adjustment
-
 
the

 
windscreen

 
and

 
side

 
windows

 
(demisting

 
or
 
defrosting),
-
 
the

 
outer
 
and
 
centre
 
air
 
vents,
-
 
the

 
footwells.
You
 
can

 
combine

 
the

 
three

 
orientations

 
to

 
obtain
 
the
 
desired
 
air
 
distribution. 8. Air intake / Air recirculation
F

Press this button for recir

-
culation
 
of

 
the

 
interior

 
air

.
 
The

 
indicator

 
lamp

 
in

 
the

 
button

 
comes
 
on.
Air
 
recirculation

 
enables

 
the

 
passenger

 
compartment

 
to

 
be

 
isolated

 
from

 
exte

-
rior
 
odours
 
and
 
smoke.
F
a
s soon as possible, press this but-
ton
 
again

 
to

 
permit

 
the

 
intake

 
of

 
out

-
side
 
air

 
and

 
prevent

 
the

 
formation

 
of

 
condensation.

 
The

 
indicator

 
lamp

 
in

 
the

 
button
 
goes
 
off.
Avoid
 
prolonged

 
operation

 
in

 
in

-
terior
 
air

 
recirculation

 
mode

 
(risk

 
of

 
misting

 
and

 
deterioration

 
of

 
air

 
quality).
COMFORT

33
56 
C4-2_en_Chap03_confort_ed01-2014
FRONT DEMIST - DEFROST
These markings on  the  control  panel
 indicate  the  control  po -
sitions
 
for
 
rapid
 
demisting
 
or
 
defrosting

 
of
 
the
 
windscreen
 
and

  side   windows.
With manual air conditioning
F Put the  temperature,  air  flow  and distribution
 controls  to  the  dedicated marked

  position.
F
 
Put
 
the
 
air
 
intake
 
control
 
to
 
the
 
"Exterior

  air   intake"   position  
 
(indicator

  lamp   on   the   control   off).
F
 
Switch
 
on
 
the
 
air
 
conditioning
 
by pressing

 
the
 
"A/C"
button; the warn-
ing
  lamp   in   the   button   comes   on.
REAR SCREEN DEMIST - DEFROST
The control button  is  located  on
 the  air  conditioning  system  
control

  panel.
Switching on
The rear  screen  demisting/defrosting  can
 only  operate  when  the  engine  is  
running.
F

 
Press
 
this
 
button
 
to
 
demist/defrost
 
the

 
rear
 
screen
 
and
 
(depending
 
on
 
version)

 
the
 
door
 
mirrors.
 
The
 
indi
-
cator
 
lamp
 
associated
 
with
 
the
 
but
-
ton
  comes   on.
Switching off
The demisting/defrosting  switches  of f  automatically
 to  prevent  an  excessive  
consumption

  of   current.
F
 
It
 
is
 
possible
 
to
 
stop
 
the
 
demisting/de
-
frosting
 
operation
 
before
 
it
 
is
 
switched of

f  
automatically
 
by
 
pressing
 
the
 
button again.

 
The
 
indicator
 
lamp
 
associated with

  the   button   goes   off.
F
 
Switch
 
of
f  
the
 
demisting/de
-
frosting
 
of
 
the
 
rear
 
screen
 
and

 
door
 
mirrors
 
as
 
soon
 
as
 
appropriate, as lower current
consumption

 
results
 
in
 
re
-
duced
  fuel   consumption.
With digital dual-zone air
conditioning
Automatic visibility programme
F 
Select
 
this
 
programme
 
to
 
demist
 
or

 
defrost
 
the
 
windscreen
 
and
 
side
 
windows

  as   quickly   as   possible.
The
 
system
 
automatically
 
manages
 
the

 
air
 
conditioning,
 
air
 
flow
 
and
 
air
 
intake,

 
and
 
provides
 
optimum
 
distribu
-
tion
 
towards
 
the
 
windscreen
 
and
 
side
 

windows.
F


To stop  the  programme,  press  either  the "visibility" button again  or  "AUT O",
the  warning  lamp  on  the  button  goes of

f  
and
 
the
 
warning
 
lamp
 
on
 
the "AUT

O"
button comes on.
The system  starts  again  with  the  values  in
 use  before  it  was  overridden  by  the  
visibility

  programme.
With
 
Stop
 
&
 
Start,
 
when
 
dem
-
isting
 
has
 
been
 
activated,
 
the
 
ST

OP
 
mode   is   not   available.
With Stop & Start, when the
demisting,
 
air

 
conditioning

 
and

 
air

 
flow

 
functions

 
are

 
activated,

 
ST

OP
 

mode
 
is
 
not
 
available.
COMFORT

33
62 
C4-2_en_Chap03_confort_ed01-2014
REAR SEATS
Bench seat with  fixed  one-piece  cush -
ion  and  split  backrest  (left  hand  2/3,  right hand

  1/3)  
which
 
can
 
be
 
folded
 
individually to

  adapt   the   load   space   in   the   boot.
Rear head restraints
These have one position for use (up)
and  a   stowed   position   (down).
They
  can   also   be   removed.
To
  remove   a   head   restraint:
F
 
release
  the   backrest   using   control   1,
F
 
tilt
  the   backrest   2   slightly   forwards,
F
 
pull
 
the
 
head
 
restraint
 
upwards
 
to
 
the stop,
F

 
then,
  press   the   lug   A.
Never
 
drive
 
with
 
the
 
head
 
re
-
straints
 
removed;
 
they
 
must
 
be
 
in

  place   and   correctly   adjusted.When
 
repositioning
 
the
 
seat
 
backrest,

 
take
 
care
 
not
 
to
 
trap
 
the

  seat   belts.
Folding the backrest
F Move the  corresponding  front  seat  forward
  if   necessary.
F

Position the seat belt between the
outer

 
and
 
centre
 
head
 
restraints
 
to
 
avoid

 
trapping
 
the
 
belt
 
when
 
reposi
-
tioning
  the   seat   backrest.
F
 
Place
 
the
 
head
 
restraints
 
in
 
the
 
low
 
position.
F


Pull control 1
 
forwards
 
to
 
release
 
the

  seat   back   2.
F

Fold the seat back 2  on   to   the   cushion.
Repositioning the seat backrest
F Straighten the  seat  back  2  and  se -
cure   it.
F
 
Check
 
that
 
the
 
red
 
indicator
,  
located
 
next

 
to
 
the
 
control
 
1
,  
is
 
no
 
longer
 
visible.
F

 
Put
 
the
 
seat
 
belt
 
back
 
in
 
place
 
on
 
the

  side   of   the   seat   backrest.
COMFORT

66 
C4-2_en_Chap04_ouvertures_ed01-2014
REMOTE CONTROL KEY
System which permits  central  unlocking  or
 locking  of  the  vehicle  using  the  door  
lock

 
or
 
from
 
a
 
distance.
 
It
 
is
 
also
 
used
 
to

 
locate
 
and
 
start
 
the
 
vehicle,
 
as
 
well
 
as

  providing   protection   against   theft.
F
 
Press
 
the
 
open
 
padlock
 
once

 
to
 
unlock
 
the
 
driver's
 
door

  only.
Selective unlocking using the
remote control
F
 
T
urn  
the
 
key
 
towards
 
the
 
front
 
in
 

the

 
driver's
 
door
 
lock
 
to
 
unlock
 
the
 
vehicle

  completely.
Complete unlocking using the
remote control
F  Press  the  open  padlock  
to

 
unlock
 
the
 
vehicle
 
com
-
pletely.
Opening the vehicle using the
2-button remote control
Unfolding the key
F
 
Press
  this   button   to   unfold   the   key.Unlocking using the key Programming unlocking
Setting  
the
 
total
 
or
 
selective
 
un
-
locking  
is
 
done
 
via
 
the
 
vehicle
 
configuration

  menu.
Complete  
unlocking
 
is
 
activated
 
by
 
de
-
fault.
F  
Press
 
the
 
open
 
padlock
 
again
 
to
 
un
-
lock   the   other   doors   and   the   boot.
The  
direction
 
indicators
 
flash
 
for
 
a

  few   seconds.
The
 
spotlamps
 
in
 
the
 
door
 
mir
-
rors
  come   on.
Depending
 
on
 
version,
 
the
 
door
 
mirrors

 
unfold,
 
the
 
welcome
 
lighting

 
comes
 
on,
 
the
 
alarm
 
is
 
deactivated.
4
ACCESS

68 
C4-2_en_Chap04_ouvertures_ed01-2014
Locking the vehicle
F Press the  closed  padlock  to  lock
  the   vehicle.
Normal locking using the remote
control
Normal locking using the key
F
 
T

urn
 
the
 
key
 
towards
 
the
 
rear
 
in
 
the
 
driver's

 
door
 
lock
 
to
 
lock
 
the
 
vehicle.
Locating your vehicle
This function allows  you  to  identify  your  vehicle
 from  a  distance,  particularly  in  
poor

 
light.
 
Y
our  
vehicle
 
must
 
be
 
locked.
Folding the key
F

 
First
  press   this   button   to   fold   the   key.
F  
Press
 
the
 
closed
 
padlock
 
on

  the   remote   control.
This
 
will
 
switch
 
on
 
the
 
courtesy
 
lamps
 
and

 
the
 
direction
 
indicators
 
will
 
flash
 
for
 
around

  ten   seconds.
The
 
direction

 
indicators

 
flash

 
for

 
a

 
few

 
seconds.
Depending

 
on

 
version,

 
the

 
door

 
mirrors

 
fold,

 
the
 
alarm
 
is
 
activated.
If
 
one

 
of

 
the

 
doors

 
or

 
the

 
boot

 
is

 
still

 
open,

 
the

 
central

 
locking

 
does

 
not
 
take
 
place.
However,
 the
 alarm
 (if
 present)
 will
 be
 completely
 activated
 after
 about
 
45
 
seconds.
If
 
the

 
vehicle

 
is

 
unlocked

 
inad

-
vertently
 
and

 
with

 
no

 
action

 
on

 
the

 
doors

 
or

 
boot,

 
the

 
vehicle

 
will

 
lock

 
itself

 
again

 
automatically

 
af

-
ter
 
about
 
30
 
seconds.
If
 
the

 
alarm

 
had

 
previously

 
been activated,

 
it

 
will

 
not

 
be

 
reactivated automatically

. The
 
folding

 
and

 
unfolding

 
of

 
the

 
door

 
mirrors

 
using

 
the

 
remote

 
control

 
can

 
be

 
deactivated

 
by

 
a

 
CITROËN

 
dealer

 
or

 
a

 
qualified

 
workshop.
Closing the windows using the


3-button remote control
F
 
Press

 
and

 
hold

 
down

 
the

 
closed

 
padlock

 
until

 
the

 
level

 
of

 
closing

 
is

 
achieved.

 
The

 
windows

 
stop

 
when

 
you

 
release
 
the
 
button.
When
 
closing

 
the

 
windows

 
using

 
the

 
remote

 
control

 
you

 
must

 
en

-
sure
 
that

 
nothing

 
prevents

 
their

 
correct

 
closing.
If
 
you

 
want

 
to

 
leave

 
the

 
windows

 
partly open, it is necessary to
deactivate

 
the

 
volumetric

 
alarm

 
protection.
If you
 do  not  press  the  button  when folding
 the  key ,  there  is  a  risk  of damage

  to   the   mechanism.
4
ACCESS

73 
C4-2_en_Chap04_ouvertures_ed01-2014
Emergency control
System allowing the  doors  to  be  locked  and
 unlocked  manually  in  the  event  of  
a

 
malfunction
 
of
 
the
 
central
 
locking
 
sys
-
tem
  or   battery   failure.
Locking the driver's door
F
 
Insert
 
the
 
key
 
in
 
the
 
door
 
lock,
 
then
 
turn

  it   to   the   rear.
You
 
can
 
also
 
apply
 
the
 
procedure
 
de
-
scribed
  for   the   passenger   doors.
Unlocking the driver's door
F
 
Insert
 
the
 
key
 
in
 
the
 
door
 
lock,
 
then
 
turn

  it   to   the   front. Locking the front and rear
passenger doors
Unlocking the front and rear
passenger doors
F
 
Pull
 
the
 
interior
 
door
 
opening
 
control.
F

 
Open
  the   doors.
F
 
On
 
the
 
rear
 
doors,
 
check
 
that
 
the
 
child

 
lock
 
is
 
not
 
on
 
(see
 
the
 
corre
-
sponding
  section).
F
 
Remove
 
the
 
black
 
cap,
 
located
 
on
 
the

  edge   of   the   door,   using   the   key.
F
 
Insert
 
the
 
key
 
in
 
the
 
socket
 
without
 
forcing

 
it,
 
then
 
without
 
turning
 
it,
 
move

 
the
 
latch
 
sideways
 
towards
 
the

  inside   of   the   door.
F
 
Remove
  the   key   and   refit   the   cap.
F
 
Close
 
the
 
doors
 
and
 
check
 
that
 
the
 
vehicle

 
has
 
locked
 
correctly
 
from
 
the

  outside.
Activation / Deactivation
You
 
can

 
activate

 
or

 
deactivate

 
this

 
func

-
tion
 
permanently.
F
 
With

 
the

 
ignition

 
on,

 
press

 
this

 
but

-
ton
 
until

 
an

 
audible

 
signal

 
starts

 
and

 
a

 
corresponding

 
message

 
is

 
dis

-
played.
the
 
state

 
of

 
the

 
system

 
stays

 
in

 
memory

 
when

 
switching
 
off
 
the
 
ignition.
4
ACCESS