tow Citroen C4 PICASSO 2011.5 1.G Owner's Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2011.5, Model line: C4 PICASSO, Model: Citroen C4 PICASSO 2011.5 1.GPages: 352, PDF Size: 9.83 MB
Page 184 of 352
X
182
CHECKS
Brake pads
Brake wear depends on
the style of driving, par-
ticularly in the case of ve-
hicles used in town, over
short distances. It may be
necessary to have the condition of
the brakes checked, even between
vehicle services.
Unless there is a leak in the circuit, a
drop in the brake fl uid level indicates
that the brake pads are worn.
Manual gearbox
The gearbox does not re-
quire any maintenance (no
oil change).
6-speed electronic
gearbox system
The gearbox does not re-
quire any maintenance (no
oil change).
Automatic gearbox
The gearbox does not re-
quire any maintenance (no
oil change).
Brake disc wear
For information on checking
brake disc wear, contact a
CITROËN dealer or a quali-
fi ed workshop.
Electric parking brake
This system does not require any
routine servicing. However, in the
event of a problem, have the system
checked by a CITROËN dealer or a
qualifi ed workshop.
For more information, see "Driving -
Electric parking brake - § Operating
faults". Refer to the servicing booklet for the
details of the level checking interval
for this component.
Refer to the servicing booklet for de-
tails of the checking interval for this
component.
Refer to the servicing booklet for de-
tails of the level checking interval for
this component.
Page 188 of 352
XI
186
PRACTICAL INFORMATION
CHANGING A WHEEL
Access to the tools
Depending on equipment, the tools
are to be found either in the com-
partment under the second-row pas-
senger footwells (the compartment
is opened by turning the screw a
quarter turn) or in the well under the
third-row left-hand seat.
1.
Tool for removing the central trim
on alloy wheels *
or
2.
Tool for removing the chrome
covers on the wheel bolts on al-
loy wheels *
3.
Centring guide *
4.
Wheelbrace
5.
Vehicle jack with integral handle
6.
Security bolt socket (located in
the glovebox) ** Switch on your hazard
warning lamps, ensure that
any passengers leave the
vehicle and fi nd a safe place to wait
away from traffi c (e.g. behind crash
barriers or on a grass verge).
Never get underneath the vehicle
if it is supported only by the jack;
use a stand.
The jack and the tools are specifi c
to your vehicle. Do not use for any
other purpose.
Do not to exceed a speed of 50 mph
(80 km/h) on your spare wheel.
Have the original wheel repaired
and refi tted as soon as possible.
7.
Short extension for C4 Picasso
8.
Long extension for Grand C4 Picasso
(located in the well under the right
hand third row seat)
9.
Two chocks, provided for changing
a wheel or for other uses on the
vehicle (such as releasing the electric
parking brake)
10.
Parking brake release tool (electric
parking brake)
11 .
Removable towing eye
*
With alloy wheels only.
** With security bolts only.
Page 189 of 352
XI
187
PRACTICAL INFORMATION
Grand C4 Picasso
C4 Picasso
Access to the spare wheel
Taking out the wheel (Grand
C4 Picasso)
)
Lift the boot fl oor covering to re-
veal the spare wheel carrier drive
on the right.
)
Take the extension 8
clipped in
the rear of the well below the
right hand third-row seat.
)
Lift up the spare wheel carrier
drive aperture cap.
)
Fit the extension to the drive then
engage the head of the wheel-
brace 4
on the extension.
)
Turn the assembly clockwise
to
the end of its travel to lower the
spare wheel carrier; the spare
wheel is now resting on the
ground.
)
Pull the wheel towards you and
pass the linking plate through
the centre of the wheel.
With the damaged wheel
now under the vehicle fl oor,
the vehicle has reduced
ground clearance, so take extra
care when reversing or driving on
uneven surfaces, including kerbs.
Retrieval of the spare wheel and
stowage of the affected road wheel
are operations that should be done
with the vehicle standing on its
wheels, not supported by the jack.
Putting the wheel back in place
)
The tyre valve must be facing
upwards.
)
Pass the linking plate through
the centre of the wheel (fi rst re-
moving the central trim on cer-
tain alloy wheels).
)
Turn the carrier drive anti-clock-
wise
to draw in the carrier cable.
Initially the drive will turn freely,
then the cable will tighten to raise
the wheel.
Check that the wheel is tight
against the vehicle fl oor and
not interfering with other nearby
components (e.g. the exhaust).
)
Stow the tools.
Taking out the wheel (C4 Picasso)
)
Lift the boot fl oor covering to re-
veal the spare wheel carrier drive
on the left.
)
Take the extension 7
from the
set of tools.
)
Lift up the spare wheel carrier
drive aperture cap, if fi tted.
)
Fit the extension to the drive then
engage the head of the wheel-
brace 4
on the extension.
)
Turn the assembly clockwise
to
the end of its travel to lower the
spare wheel carrier; the spare
wheel is now resting on the
ground.
)
Pull the wheel towards you and
pass the linking plate through
the centre of the wheel.
Page 192 of 352
XI
190
PRACTICAL INFORMATION
CHANGING A BULB
The headlamps are fi tted
with polycarbonate glass
with a protective coating:
)
do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,
)
use a sponge and soapy water,
)
when using a high pressure
washer on persistent marks,
do not keep the lance directed
towards the lamps or their
edges for too long, so as not to
damage their protective coating
and seals.
)
Do not touch the bulb directly
with your fi ngers, use lint-free
cloths.
Changing a bulb should only be
done after the headlamp has been
switched off for a few minutes (risk
of serious burns).
It is imperative to use only anti-ul-
traviolet (UV) type bulbs in order
not to damage the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specifi cation.
Front lamps
1.
Dipped beam headlamps
(H7-55 W)
2.
Main beam headlamps
(H1-55 W)
3.
Sidelamps (H6W-6 W
)
Daytime running lamps/
sidelamps (LEDs)
4.
Direction indicators
(H21-21 W)
Model with halogen headlamps
Model with Xenon headlamps
and directional headlamps
1.
Dual-function Xenon
headlamps (dipped/main
beam)
2.
Additional main beams
(H7-55W)
3.
Sidelamps (H6W-6W)
Daytime running lamps/
sidelamps (LEDs
)
4.
Direction indicators (H21-21W)
Page 209 of 352
XI
207
PRACTICAL INFORMATION
TOWING THE VEHICLE
Procedure for having your vehicle
towed or for towing another vehicle
using a removable towing eye.
Access to the tools
According to equipment, the towing
eye is installed in the storage fl ap
under the second row passenger
footwell or under the boot fl oor.
To gain access to it:
)
open one of the rear doors or the
boot (according to equipment),
)
open the fl ap or raise the fl oor
(according to equipment),
)
remove the towing eye from the
holder.
Towing your vehicle
)
On the front bumper, unclip the
cover by pressing at the top left
and pulling at the right.
)
Screw the towing eye in fully.
)
Install the towing bar.
)
Switch on the hazard warning
lamps on the towed vehicle.
)
Place the gear lever in neutral
(position N
on the electronic
gearbox or automatic gearbox).
Towing another vehicle
)
On the rear bumper, unclip the
cover by pressing at the bottom
at pulling at the top.
)
Screw the towing eye in fully.
)
Install the towing bar.
)
Switch on the hazard warning
lamps on the towed vehicle.
Failure to observe this instruction
could result in damage to certain
braking components and the ab-
sence of braking assistance the
next time the engine is started.
Page 210 of 352
XI
208
PRACTICAL INFORMATION
General recommendations
Observe the legislation in force in your country.
Ensure that the weight of the towing vehicle is higher than that of the towed vehicle.
The driver must stay at the wheel of the towed vehicle.
Driving on motorways and fast roads is prohibited when towing.
When towing a vehicle with all four wheels on the ground, always use an approved towing bar; rope and straps are
prohibited.
When towing a vehicle with the engine off, there is no longer any power assistance for braking or steering.
In the following cases, you must always call on a professional recovery service:
- vehicle broken down on a motorway or fast road,
- when it is not possible to put the gearbox into neutral, unlock the steering, or release the parking brake,
- towing with only two wheels on the ground,
- where there is no approved towing bar available...
Page 211 of 352
XI
209
PRACTICAL INFORMATION
Towbar suitable for the attachment
of a trailer with additional lighting
and signalling.
Your vehicle is primarily designed
for transporting people and luggage,
but it may also be used for towing a
trailer.
We recommend the use of genuine
CITROËN towbars and their har-
nesses that have been tested and
approved from the design stage
of your vehicle, and that the fi t-
ting of the towbar is entrusted to
a CITROËN dealer or a qualifi ed
workshop.
If the towbar is not fi tted by a
CITROËN dealer, it is imperative
that it is fi tted in accordance with the
vehicle manufacturer's instructions.
Driving advice
Distribution of loads
)
Distribute the load in the trailer
so that the heaviest items are as
close as possible to the axle and
the nose weight approaches the
maximum permitted without ex-
ceeding it.
Air density decreases with altitude,
thus reducing engine performance.
Above 1 000 metres, the maximum
towed load must be reduced by 10 %
for every 1 000 metres of altitude.
Refer to the "Technical Data" section
for details of the weights and towed
loads which apply to your vehicle.
Side wind
)
Take into account the increased
sensitivity to side wind.
)
To lower the engine speed, re-
duce your speed.
The maximum towed load on a long
incline depends on the gradient and
the ambient temperature.
In all cases, keep a check on the
coolant temperature.
)
If the warning lamp and
the STOP
warning lamp
come on, stop the vehicle
and switch off the engine
as soon as possible.
Braking
Towing a trailer increases the brak-
ing distance.
To avoid overheating of the brakes
on a long mountain type of descent,
the use of engine braking is recom-
mended.
Tyres
)
Check the tyre pressures of the
towing vehicle and of the trailer,
observing the recommended
pressures.
Lighting
)
Check the electrical lighting and
signalling on the trailer.
The rear parking sensors will be
deactivated automatically if a gen-
uine CITROËN towbar is used.
Driving with a trailer places greater
demands on the towing vehicle and
the driver must take particular care.
Cooling
Towing a trailer on a slope increases
the temperature of the coolant.
As the fan is electrically controlled,
its cooling capacity is not dependent
on the engine speed.
Page 212 of 352
XI
210
PRACTICAL INFORMATION
ROOF BARS
For your safety and to avoid damage
to the roof and tailgate, the design of
your vehicle requires the use of roof
bars and roof boxes that are tested
and approved by CITROËN.
Regardless of the type of load car-
rier to be mounted on the roof (roof
box, bicycle carrier, ski carrier...),
you must fi t transverse roof bars.
Recommendations
)
Distribute the load evenly, avoid-
ing overloading on one side.
)
Arrange the heaviest part of the
load as close as possible to the
roof.
)
Anchor the load securely and fi t
a warning fl ag part of it is over-
hanging.
)
Drive gently, as the vehicle will
be more liable to the effects of
side winds (vehicle stability may
be altered).
)
Remove the roof bars as soon
as they are no longer needed.
Bicycle carrier
Do not attach a strap-fi tting bicycle car-
rier to the following vehicle versions:
- C4 Picasso 5-seater (all versions);
- C4 Picasso 7-seater version with
opening rear screen.
Maximum load, distributed
over the roof bars (for a loading
height not exceeding 40 cm,
except bicycle carrier): 80 kg.
If the height exceeds 40 cm, adapt
your speed to the profi le of the road
to avoid damaging the roof bars
and the fi xings on the roof.
Please refer to national legislation
in order to comply with the regula-
tions concerning the transport of
objects which are longer than the
vehicle.
* According to country.
VERY COLD CLIMATE SCREEN *
Removable protective screen which
prevents the accumulation of snow
at the radiator cooling fan.
Fitting
)
Offer up the very cold climate
screen to the front of the lower
section of the front bumper.
)
Press around its edge to engage
its fi xing clips one by one.
Removal
)
Use a screwdriver as a lever to
release each fi xing clip in turn.
Do not forget to remove the very
cold climate screen:
- when the ambient temperature
exceeds 10 °C,
- when towing,
-
at speeds above 75 mph (120 km/h).
Page 213 of 352
XI
211
PRACTICAL INFORMATION
*
To avoid any risk of jamming of
the pedals:
- ensure that the mat is posi-
tioned and secured correctly,
- never fi t one mat on top of an-
other.
ACCESSORIES
A wide range of accessories and
genuine parts is available from the
CITROËN dealer network.
These accessories and parts have
been tested and approved for reli-
ability and safety.
They are all adapted to your vehicle
and benefi t from CITROËN's recom-
mendation and warranty.
"Transport solutions":
towbar har-
ness, boot carpet, boot liner, boot
spacers, transverse roof bars, bi-
cycle carrier, ski carrier, roof boxes,
towbars...
"Comfort":
front and rear parking
sensors, isotherm module, recharge-
able torch, sun blinds, air defl ector,
fragrance cartridges...
"Style":
Alloy wheels, wheel embel-
lishers...
"Protection":
anti-theft alarm,
wheel security devices, stolen ve-
hicle tracking system, breathalyser,
fi rst aid kit, warning triangle, high vis-
ibility vest, dog guard, snow chains,
anti-skid covers, foglamps kit, tem-
porary puncture repair kit, booster
cushions and child seats...
"Protection"
: mats * , seat covers,
mud fl aps, sill protectors, bumper
protectors, vehicle covers...
Page 216 of 352
XII
214
TECHNICAL DATA
WEIGHTS AND TOWED LOADS (in kg)
Petrol engines
VTi 120
THP 155
VTi 143
Gearboxes
Automatic
Electronic gearbox system
Automatic
Model codes:
UA... UE... UD...
5FS-0
5FV-8/P
RFJ-F
- Unladen weight
1 430 - 1 415 - 1 415
1 517 - 1 430 - 1 430
1 600 - 1 556 - 1 552
- Kerb weight
1 505 - 1 490 - 1 490
1 592 - 1 505 - 1 505
1 675 - 1 631 - 1 627
- Payload
770 - 700 - 525
703 - 630 - 610
660 - 514 - 538
- Gross vehicle weight
(GVW)
2 200 - 2 115 - 2 015
2 220 - 2 060 - 2 040
2 260 - 2 070 - 2 090
- Gross train weight
(GTW)
on a 12 % gradient
3 300 - 3 315 - 3 315
3 420 - 3 410 - 3 390
3 660 - 3 570 - 3 590
-
Braked trailer
(within GTW limit)
on a 10 % or 12 % gradient
1 100 - 1 200 - 1 300
1 200 - 1 350 - 1 350
1 400 - 1 500 - 1 500
- Braked trailer * (with load
transfer within GTW
limit)
1 300 - 1 500 - 1 500
1 500
1 500
- Unbraked trailer
750 -745 - 745
750
750
- Recommended nose weight
60
60
60
The GTW and towed load values indicated apply up to a maximum altitude of 1,000 metres; the towed load mentioned
must be reduced by 10 % for each additional 1,000 metres of altitude.
The speed of a towing vehicle must not exceed 100 km/h (approx. 60 mph) (comply with the legislation in force in your
country).
High ambient temperatures may result in a reduction in the performance of the vehicle in order to protect the engine; when
the ambient temperature is higher than 37 °C, limit the weight towed.
*
The weight of the braked trailer can be increased, within the GTW limit, on condition that the GVW of the towing vehicle is reduced
by the same amount; warning, towing with a lightly loaded towing vehicle may have an adverse effect on its road holding.