ECO mode Citroen C4 PICASSO DAG 2010.5 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2010.5, Model line: C4 PICASSO DAG, Model: Citroen C4 PICASSO DAG 2010.5 1.GPages: 355, PDF Size: 13.32 MB
Page 14 of 355
17
F A M I L I A R I S A T I O N
Recommended settings
- Heating/manual air conditioning:
- Digital air conditioning: the fully automatic mode is recommended - press "AUTO" .
Operate
For...
Cooling
or
Fully cold to
start, then personal settings
Maximum to
start, then personal settings
ON
ON when
starting,
then OFF
Heating
or
Fully hot to
start, then personal settings
Maximum to
start, then personal setting
ON when
starting,
then OFF
Demisting
Defrosting
Fully hot
OFF
V E N T I L A T I O N
Page 22 of 355
25
F A M I L I A R I S A T I O N
163
Electric parking brake
Before leaving the vehicle, check that
the electric parking brake warning
lamp P ( r e d ) i s o n fi x e d ( n o t fl a s h i n g ) .
If you leave the vehicle with the en-
gine running, apply the parking brake
manually.
Never leave a child alone inside the
vehicle with the ignition on, as they
could release the parking brake. Parking space sensor
You can activate this function by press-
ing button
A .
Once the space has been measured, the
system displays the following messages:
< 1 2 m p h ( 2 0 k m / h )
Parking possible
P a r k i n g d i f fi c u l t
Parking not advised
This device combines:
- automatic functions: Automatic ap-
plication when the engine stops and
automatic release on use of the ac-
c e l e r a t o r ( a u t o m a t i c o p e r a t i o n b y
d e f a u l t ) ;
- manual use: Manual application/ release of parking brake is possible
by operating control lever A .
When in automatic mode, it remains
possible to apply or release the parking
brake at any time:
To apply it, pull on the lever A .
To release it, pull then release lever A .
Hill start assist
To aid starting on a gradient, your vehicle
i s e q u i p p e d w i t h a s y s t e m w h i c h k e e p s
it immobilised for about 2 seconds, the
approximate time it takes to move your
foot from the brake pedal to the accel-
erator pedal.
143
D R I V I N G
136
Do not drive if the parking brake
warning lamp and the P indicator on
the lever A are on.
Page 24 of 355
27
F A M I L I A R I S A T I O N
D R I V I N G
Stop & Start
Engine going into STOP mode The "ECO" warning lamp comes
on in the instrument panel and
the engine goes into stand-by:
- with the 6-speed electronic gear-
box system ; at speeds below
4 m p h ( 6 k m / h ) , p r e s s t h e b r a k e
pedal or put the gear lever into neu-
t r a l ( p o s i t i o n N) .
In certain circumstances the STOP
mode may not be available; the "ECO"
w a r n i n g l a m p fl a s h e s f o r a f e w s e c o n d s
then goes off.
150 The
"ECO" warning lamp goes
off and the engine restarts:
- with the gear lever in position A or M ,
release the brake pedal,
- or with the gear lever in position N and
the brake pedal released, change to
position A or M ,
- or select reverse gear.
In certain condition, START mode may
be invoked automatically; the "ECO"
w a r n i n g l a m p fl a s h e s t h e n g o e s o f f .
151 Deactivation/Reactivation
You can deactivate the system at any
time by pressing the
"ECO OFF" button;
the button's warning lamp comes on.
The system is reactivated automati-
cally every time you start the engine
with the key. Before refuelling or doing any-
thing under the bonnet, you
must switch off the ignition
with the key.
151
Going into engine START mode
Page 28 of 355
I
32M O N I T O R I N G
Indicator and warning lamps
Visual indicators informing the driver that a system is in
operation (operation or deactivation indicator lamps) or of
the occurrence of a fault (warning lamp).
When the ignition is switched on
Certain warning lamps come on for a few seconds when
the vehicle's ignition is switched on.
When the engine is started, these same warning lamps
should switch off.
If they remain on, before moving off, refer to the informa-
tion on the warning lamp concerned.
Associated warnings
The switching on of certain warning lamps may be a
ccompanied
by an audible signal and a message on the multifunc tion screen.
Operation indicator lamps
I f o n e o f t h e f o l l o w i n g i n d i c a t o r l a m p s c o m e s o n , t h i s c o n fi r m s
that the corresponding system has come into operati on.
T h e w a r n i n g l a m p s m a y c o m e o n c o n t i n u o u s l y ( fi x e d ) o r fl a s h .
Certain warning lamps may come on in two different modes.
Only by relating the type of lighting to the operat ing status of the
vehicle can it be ascertained whether the situation is normal or
whether a fault has occurred.
Warning lamp is on Cause Action/Observations
Left-hand
direction
indicato
r fl a s h i n g w i t h
buzzer. The lighting stalk is pushed down.
Right-hand
direction
indicator fl a s h i n g w i t h
buzzer. The lighting stalk is pushed up.
Sidelamps fi x e d . The lighting stalk is in the
"Sidelamps" position.
Dipped beam
headlamps fi x e d . The lighting stalk is in the "Dipped
beam headlamps" position.
Main beam
headlamps fi x e d . The lighting stalk is pulled towards
you. Pull the stalk to return to dipped
beam headlamps.
Hazard
warning lamps fl a s h i n g w i t h
audible signal. The hazard warning lamps switch,
located on the dashboard, has been
operated. The left-hand and right-hand direction
indicators and their associated indicator
l a m p s fl a s h s i m u l t a n e o u s l y .
Page 30 of 355
I
34M O N I T O R I N G
Warning lamp is on Cause Action/Observations
Stop & Start fi x e d .
The Stop & Start system has
put the engine in STOP mode
a t a v e h i c l e s t o p ( t r a f fi c l i g h t s ,
t r a f fi c j a m , o r o t h e r . . . ) . The warning lamp goes off and the engine
restarts automatically in START mode, as
soon as you want to move off.
fl a s h e s f o r a f e w seconds, then goes off. STOP mode is temporarily
unavailable.
or
START mode is invoked
automatically. Refer to "Driving - § Stop & Start" for
special cases with STOP mode and
START mode.
Passenger's
airbag
system fi x e d . The control switch, located in
the glove box, is in the "
ON "
position.
The passenger's front airbag
is activated.
In this case, do not install a
rear-facing child seat. Turn the control switch to the "
OFF "
position to deactivate the front passenger's
airbag.
In this case you can install a rear-facing
child seat.
The passenger's airbag system is
automatically put into service on starting
the vehicle (" ON " position).
Page 52 of 355
II
54
M U L T I F U N C T I O N S C R E E N S
A few definitions… Range
( m i l e s o r k m )
This value may vary following a
change in the style of driving or
t h e r e l i e f , r e s u l t i n g i n a s i g n i fi c a n t
change in the current fuel con-
sumption.
W h e n t h e r a n g e f a l l s b e l o w 2 0 m i l e s
( 3 0 k m ) , d a s h e s a r e d i s p l a y e d . A f t e r
fi l l i n g w i t h a t l e a s t 5 l i t r e s o f f u e l ,
the range is recalculated and is dis-
p l a y e d w h e n i t e x c e e d s 6 0 m i l e s
( 1 0 0 k m ) .
If dashes are displayed continu-
ously while driving in place of the
digits, contact a CITROËN dealer.
This indicates the distance which
can still be travelled with the fuel re-
m a i n i n g i n t h e t a n k i n r e l a t i o n t o t h e
average fuel consumption over the
l a s t f e w m i l e s ( k i l o m e t r e s ) t r a v e l l e d .
Current fuel consumption
( m p g o r l / 1 0 0 k m o r k m / l )
A v e r a g e f u e l
consumption
( m p g o r l / 1 0 0 k m o r k m / l )
This is the average fuel consump-
tion since the last trip computer zero
reset.
A v e r a g e s p e e d
( m p h o r k m / h )
This is the average speed calculat-
ed since the last trip computer zero
r e s e t ( i g n i t i o n o n ) . D i s t a n c e t r a v e l l e d
( m i l e s o r k m )
This indicates the distance travelled
since the last trip computer zero
reset.
Distance remaining to
destination
( m i l e s o r k m )
This is the distance remaining to be
t r a v e l l e d t o t h e fi n a l d e s t i n a t i o n . I t
is either calculated instantly by the
navigation system, if guidance is ac-
tivated, or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
This function is only displayed from
2 0 m p h ( 3 0 k m / h ) .
This is the average fuel consump-
tion during the last few seconds.
I f y o u r v e h i c l e i s fi t t e d w i t h S t o p &
Start, a time counter calculates the
time spent in STOP mode during a
journey.
It resets to zero every time the igni-
t i o n i s s w i t c h e d o n w i t h t h e k e y . Stop & Start time counter
( m i n u t e s / s e c o n d s o r h o u r s /
minutes)
Page 57 of 355
III
59
C O M F O R T
DIGITAL AIR CONDITIONING
The air conditioning system oper-
ates with the engine running.
1. Automatic comfort regulation
A press on this button,
c o n fi r m e d b y t h e d i s p l a y o f
the A/C warning lamp and
of AUTO on the screen, pro-
vides automatic control, at the tem-
perature selected, of all the following
5 functions:
- a i r fl o w ,
- passenger compartment tempe- rature, left and right,
- air distribution,
- air conditioning,
- automatic air recirculation. For this facility to operate, it is rec-
ommended that all air vents are kept
open.
Using the
AUTO mode will prevent
the formation of mist inside the
vehicle in cold or humid weather.
When starting from cold, in order to
avoid a rush of cold air, the air fan at-
tains its optimum level progressively. 2. Adjustment of temperature
To display the desired temperature,
press button:
-
- to decrease the temperature,
- + to increase the temperature.
A setting around 21 will provide
an agreeable temperature level.
However, depending on your prefer-
ence, anything between 18 and 24
is quite normal.
For optimum comfort, it is recom-
mended to avoid a difference of set-
tings of more than than 3 between
right and left.
Actual temperatures experienced in
the passenger compartment are de-
pendent on external factors and for
this reason might not be identical to
those displayed.
On entering the vehicle, the inside
temperature may be much colder (or
hotter) than would be comfortable. It
serves no purpose to alter the tem-
perature displayed in an attempt to
attain your preference more rapidly.
The system operates automatically
to correct the difference in tempera-
ture as soon as possible.
Manual resumption of one or more
functions
It is possible to adjust each of the
functions 3 , 4 , 6 and 10 manually.
The display of the "AUTO" function
will then go off.
Resumption by the driver of the
adjustment of passenger com-
partment temperatures (for the
front and rear passengers)
A long press on the "AUTO" but-
ton cancels all personal settings,
including the passenger's tem-
perature, and returns the system
to automatic operation.
A. DRIVER'S CONTROL PANEL
Page 90 of 355
IV
85
A C C E S S
ELECTRIC WINDOWS
System intended to open or close a
window manually or automatically.
Fitted with a safety anti-pinch system
and a system for deactivation in the
event of misuse of the rear controls.
1. Driver's electric window control.
2.
Passenger's electric window control.
3. Rear right electric window control.
4.
Rear left electric window control.
5. Deactivation of the rear electric
window and door controls. One-touch electric windows
There are two options:
-
automatic mode
Press or pull the control
fi r m l y . T h e w i n d o w o p e n s o r
closes fully when the control is
released.
Pressing the control again
stops the movement of the
window.
The electric window controls re-
main operational for approximately
45 seconds after the ignition is
switched off or until the vehicle is
locked after a door is opened.
If one of the passenger windows
cannot be operated from the driv-
er's door control panel, carry out
the operation from the control
panel of the passenger door con-
cerned, and vice versa. Safety anti-pinch
When the window rises and meets
an obstacle, it stops and partially
lowers again.
If the window cannot be closed (for
example, in the presence of ice),
immediately after the movement is
reversed:
press and hold the control until
the window opens fully,
then pull the control immediate-
ly and hold it until the window
closes,
continue to hold the control for
approximately one second after
the window has closed.
The safety anti-pinch function
is not operational during these
operations.
-
manual mode
Press or pull the control gently.
The window stops when the
control is released.
Page 110 of 355
V
101
V I S I B I L I T Y
Special position of the
windscreen wipers
This position permits release of the
windscreen wiper blades.
It is used for cleaning or replacement
of the blades. It can also be useful,
in winter, to detach the blades from
the windscreen.
In the moment following switching
off of the ignition, any action on the
stalk positions the wipers vertically
on the windscreen. To park the wipers after this has
been done, switch on the ignition
and operate the stalk.
For maintain the effectiveness of
t h e " fl a t - b l a d e " w i p e r b l a d e s , i t i s
advisable to:
- handle them with care,
- clean them regularly using soapy water,
- avoid using them to retain card- board on the windscreen.
- r e p l a c e t h e m a t t h e fi r s t s i g n s of wear.
COURTESY LAMPS
1. Front courtesy lamp
2. Map reading lamps
Front courtesy lamp In this position, the courtesy
lamp comes on gradually: Permanently off.
Permanent lighting.
In permanent lighting mode, differ-
ent lighting times are available:
- with the ignition off, approxi- mately ten minutes,
- in energy economy mode, approximately thirty seconds,
- with the engine running, unlimited.
- when the vehicle is unlocked,
- when a door or the boot is opened,
- when the key is removed from the ignition,
- when the remote control locking button is activated, in order to lo-
cate your vehicle.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- 30 seconds after the last door is closed. Map reading lamps
With the ignition on, press the
corresponding switch.
Panoramic sunroof courtesy
lamps
These courtesy lamps have two oper-
ating modes:
- automatic lighting when a door is opened or when the front cour-
tesy lamp is in the "permanent
lighting" position,
- permanent lighting.
Opening the boot switches on the
third row courtesy lamp and the boot
lamps.
Page 112 of 355
V
101
V I S I B I L I T Y
Special position of the
windscreen wipers
This position permits release of the
windscreen wiper blades.
It is used for cleaning or replacement
of the blades. It can also be useful,
in winter, to detach the blades from
the windscreen.
In the moment following switching
off of the ignition, any action on the
stalk positions the wipers vertically
on the windscreen. To park the wipers after this has
been done, switch on the ignition
and operate the stalk.
For maintain the effectiveness of
t h e " fl a t - b l a d e " w i p e r b l a d e s , i t i s
advisable to:
- handle them with care,
- clean them regularly using soapy water,
- avoid using them to retain card- board on the windscreen.
- r e p l a c e t h e m a t t h e fi r s t s i g n s of wear.
COURTESY LAMPS
1. Front courtesy lamp
2. Map reading lamps
Front courtesy lamp In this position, the courtesy
lamp comes on gradually: Permanently off.
Permanent lighting.
In permanent lighting mode, differ-
ent lighting times are available:
- with the ignition off, approxi- mately ten minutes,
- in energy economy mode, approximately thirty seconds,
- with the engine running, unlimited.
- when the vehicle is unlocked,
- when a door or the boot is opened,
- when the key is removed from the ignition,
- when the remote control locking button is activated, in order to lo-
cate your vehicle.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- 30 seconds after the last door is closed. Map reading lamps
With the ignition on, press the
corresponding switch.
Panoramic sunroof courtesy
lamps
These courtesy lamps have two oper-
ating modes:
- automatic lighting when a door is opened or when the front cour-
tesy lamp is in the "permanent
lighting" position,
- permanent lighting.
Opening the boot switches on the
third row courtesy lamp and the boot
lamps.