wheel bolts Citroen C4 PICASSO RHD 2014.5 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2014.5, Model line: C4 PICASSO RHD, Model: Citroen C4 PICASSO RHD 2014.5 1.GPages: 428, PDF Size: 10.03 MB
Page 263 of 428
261
Changing a wheel
The tools are installed in the boot under the fl o o r.
Remove
the boot carpet for access to them.
Access to the tools
List of tools*
Procedure for changing a faulty wheel for the spare wheel using the tools provided with the vehicle.
* According to equipment.
al
l of these tools are specific to your
vehicle
and can vary according to the level
o
f equipment. Do not use them for other
p
urposes.
1.
W
heelbrace.
F
or removing the wheel trim and removing
t
he wheel bolts.
2.
C
hocks for immobilising the vehicle
(except
versions with manual gearbox).
3.
J
ack with integral handle.
F
or raising the vehicle.
4.
W
heel bolt cover removal tool.
F
or removing the finishers on the heads of
t
he wheel bolts on alloy wheels.
5.
S
ocket for the security bolts (located in the
g
love box).
F
or adapting the wheelbrace to the special
"s
ecurity"
b
olts.
7
Practical information
Page 265 of 428
263
* Depending on version. The complete tooling i
s with the spare wheel.
Changing a wheelProcedure for changing a wheel with a punctured tyre by the spare wheel using the tools provided with the vehicle.
S
ome
of
the
tools are accessible from inside
t
he
boot.
The
wheel chocks 2 as well as the
wheelbrace
extension 6 are stowed under the
r
ight
hand
boot sill.
The wheelbrace 1
and the towing eye 7 are
stowed
under
the left hand boot sill.
The
other
tools, the jack 3 and the tool for
r
emoving
the
wheel bolt head finishers for alloy
w
heels 4 ,
are
stowed in a box attached to the
s
pare
wheel.
The assembly is secured under
t
he
vehicle
in
a carrier. See the "Access to the
s
pare
wheel"
section).
Access to the vehicle's tools*
2. Wheel chocks for immobilising the vehicle (
except versions with manual gearbox).
3.
J
ack with integral handle.
F
or raising the vehicle.
4.
W
heel bolt head cover removal tool.
F
or removing the wheel bolt head finishers
o
n alloy wheels.
5.
S
ocket for the security bolts (stowed in the
g
love box).
F
or adapting the wheelbrace to the special
s
ecurity bolts.
6.
W
heelbrace
e
xtension.
F
or unscrewing/tightening the spare wheel
c
arrier drive.
7.
T
owing eye.
Wheel with trim
When removing the wheel , detach the trim f
irst using the wheelbrace 1 pulling at the valve
p
assage hole.
When refitting the wheel ,
refit the trim
s
tarting by placing its notch facing the valve
a
nd press around its edge with the palm of
y
our hand.
List of tools*
all of these tools are specific to your vehicle
and can vary according to equipment. Do not
u
se them for other purposes.
1.
W
heelbrace.
F
or removing the wheel trim and the wheel
f
ixing
bol
ts.
7
Practical information
Page 269 of 428
267
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not block traffic: the ground must be level,
s
table and not slippery.
Apply
the parking brake unless it has
b
een programmed to automatic mode,
s
witch off the ignition and engage first
g
ear* to block the wheels.
Check
that the braking warning lamp
a
nd the P warning lamp in the parking
b
rake control lever come on.
For
greater safety, place a chock 2
against
the wheel opposite to the one
b
eing
c
hanged.
The
occupants must get out of the
v
ehicle and wait where they are safe.
Never
go underneath a vehicle raised
u
sing a jack; use an axle stand.
List of operations
F Remove the finisher from from each o
f bolts using the tool 4 (depending on
e
quipment).
F
F
it the security socket 5 on the
wheelbrace
1 to slacken the security bolt
(if
fitted).
F
S
lacken the other bolts (no more than a
1
/4 turn) using the wheelbrace 1
o
n l y.
*
Position R
for
an
electronic
gearbox
or
P for
an
automatic
gearbox. Do
not use:
-
t
he jack for anything other than
l
ifting the vehicle,
-
a
ny other jack than the one
s
upplied by the manufacturer.
7
Practical information
Page 271 of 428
269
F Remove the bolts and store them in a clean p
lace.
F
R
emove the wheel.
Ensure
that the jack is stable. If the
g
round is slippery or loose, the jack
m
ay slip or drop - Risk of injury!
Ensure
that the jack is positioned only
a
t one of the jacking points A or B
under
the vehicle, making sure that the
v
ehicle's contact sur face is centred on
t
he head of the jack. Other wise there is
a
risk of damage to the vehicle and/or of
t
he jack dropping - Risk of injury!
Fitting a wheel
Fitting the "space-saver"
spare wheel
If your vehicle is fitted with alloy wheels, when tightening the bolts on fitting, it
i
s normal to notice that the washers
d
o not come into contact with the
"
space-saver" spare wheel. The wheel
i
s secured by the conical sur face of
e
ach bolt.
After changing a wheel
To correctly store the punctured wheel in the boot ( not in the location of the
space-saver wheel ),
first remove the
c
entral cover.
When
using the "space-saver" type
s
pare wheel, do not exceed 50 mph
(
80 km/h).
Have
the tightening of the bolts and the
p
ressure of the spare wheel checked
b
y a CITROËN dealer or a qualified
w
orkshop without delay.
Have
the punctured wheel repaired
a
nd refitted to the vehicle as soon as
p
ossible.
7
Practical information
Page 272 of 428
270
F Lower the vehicle fully.
F F old the jack 3 and detach it.F
T ighten the security bolt using the w
heelbrace 1 fitted with the security
s
ocket 5
(depending on equipment).
F
T
ighten the other bolts using the
w
heelbrace 1
o
n l y.
F
R
efit the bolt covers on each of the bolts or
the
hub cap (depending on equipment).
F
S
tore the tools in the box.
List of operations
F Put the wheel in place on the hub.
F S crew in the bolts fully by hand.
F
P
re-tighten the security bolt using the
w
heelbrace 1 fitted with the security
s
ocket 5
(depending on equipment).
F
P
re-tighten the other bolts using the
w
heelbrace 1
o
n l y.
Practical information
Page 304 of 428
302
accessories
A wide range of accessories and genuine parts is available from the CITROËN dealer network.
T hese accessories and parts are all suitable for your vehicle and benefit from CITROËN's recommendation and warranty.
"Comfort"
Door deflectors, side window blinds, rear screen blind, insulated module, coat hanger
f
ixed to head restraint, mobile reading
l
amp, mirror for caravan, parking sensors,
p
rogrammable additional heating, smoker's
k
it, solar film for rear door windows, portable
s
cented air freshener...
"Transport systems"
boot carpet, boot liner, boot net, boot spacers,
transverse roof bars, ski carrier, roof boxes,
t
owbars, towbar wiring harnesses, bicycle
c
arriers for towbar and roof bars, towbars
w
ith fixed and detachable towball, separation
n
et, sliding carrier, boot organiser (Grand C4
P
icasso)...
If
a towbar and wiring harness are fitted
o
utside the CITROËN dealer network, the
i
nstallation must be done strictly in line with the
ma
nufacturer's
r
ecommendations.
If
your vehicle has a detachable towball, it is
r
ecommended that the ball be removed when
n
ot towing.
"Styling"
Gear lever knobs, aluminium foot rest, alloy wheels...
"Security and safety"
Anti-intrusion alarm, stolen vehicle tracking system, child seats and booster cushions,
b
reathalyser, first aid kit, fire extinguisher,
w
arning triangle, high visibility vest, wheel
s
ecurity bolts, snow chains, non-slip covers,
w
inter tyres, foglamp kit, security film for front
d
oor windows, dog guard, pet seat belt...
"Protection"
Mats*, seat covers compatible with lateral airbags, mud flaps, door protective mouldings,
b
umper protection strips, vehicle cover, boot
s
ill protector, door sill protectors, seat and boot
p
rotective covers for pets...
The
rear bodywork has been designed to avoid
s
p r ay.
*
T
o avoid any risk of jamming the pedals:
-
e
nsure that mats are correctly positioned
a
nd secured,
-
n
ever fit one mat on top of another.
Practical information