ECU Citroen C5 2000 (DC/DE) / 1.G Owner's Manual

Downloaded from www.Manualslib.com manuals search engine 2000
2000CAR 050007
AC/QCAV/MTD
Méthodes Techniques Documentation’’The intellectual property rights relating to the technical information contained in this document belong
exclusively to the manufacturer. Reproduction, translation or distribution in whole or in part without
prior written authorisation from the manufacturer is forbidden.‘‘
PRIVATE CARS
«The technical information contained in this document is intended for the exclusive use of the trained personnel of the
motor vehicle repair trade. In some instances, this information could concern the security and safety of the vehicle. The
information is to be used by the professional vehicle repairers for whom it is intended and they alone would assume full
responsibility to the exclusion of that of the manufacturer».
’’The technical information appearing in this brochure is subject to updating as the characteristics of each
model in the range evolve. Motor vehicle repairers are invited to contact the CITROËN network periodically
for further information and to obtain any possible updates».

Downloaded from www.Manualslib.com manuals search engine GENERAL
27
Oils specifically
for diesel engines
Australia
New Zealand
Angola - Ivory Coast
Egypt - Ecuador - Gabon
Madagascar - Morocco
Dominican Republic
Senegal - Tunisia
Argentina - Brazil - Chile
Colombia - Cuba
Guatemala- Paraguay
Peru - El Salvador
Uruguay
LUBRICANTS – TOTAL recommended oils
TOTAL QUARTZTOTAL QUARTZ DIESEL
Blended oils for all
enginesOils specifically for petrol and
dual-fuel petrol / LPG engines
OCEANIA
AFRICA
SOUTH
AMERICA9000 5W-40
9000 5W-40
9000 5W-407000 10W-40
7000 15W-50
7000 15W-507000 10W-40
7000 15W-50
7000 15W-50

Downloaded from www.Manualslib.com manuals search engine ENGINE
75
CHECKING AND SETTING THE VALVE TIMING
Engine : XFX
Checking the valve timing setting (continued).
- Peg the crankshaft, using tool[1].
- Check that the tool [2]engages without effort in the cylinder heads at the camshaft pulleys.
- Remove the tools [1] and [2].
Refit :
- The lower timing cover(13).
- The upper timing covers (9)and(10).
- The crankshaft pulley (12).
- The roller / dynamic tensioner assembly (11).
- The power steering pulley.
- Complete the refitting of components.
- Initialise the ignition injection ECU.
B1EP15UDB1EP08TC

Downloaded from www.Manualslib.com manuals search engine 120
INJECTION
PROHIBITED OPERATIONS: HDi DIRECT INJECTION SYSTEM
Engines : RHY - RHZ - 4HX
Cleaning.
- The use of high pressure cleaners is prohibited.
- Do not use compressed air.
Fuel supply circuit.
- Required fuel : diesel.
Electric circuit.
- Swapping injection ECUs Between two vehicles will render it impossible to start either vehicle.
- It is forbidden to supply a diesel injector with 12 volts.
High pressure fuel pump.
Do not separate the following components from the high pressure fuel pump (5):
- Sealing ring (b)(no replacement parts).
- High pressure outlet connector (a)(will cause a malfunction).
PS : HDi = High pressure diesel injection.
B1HP19LC

Downloaded from www.Manualslib.com manuals search engine FEATURES OF MULTIPOINT INJECTION SYSTEM
Summary
(1) Air pump
(2) Power steering pressure sensor
(3) Engine management ECU
(4) Canister purge electrovalve
(5)Butterfly housing
(6)Idle regulation stepper motor
(7) Inlet air temperature sensor
(8)Inlet housing heater element
(9)Butterfly potentiometer
(10)Automatic gearbox (Option)
(11)Built-in systems interface
(12) Transponder
(13)Diagnostic connector
(14) Ignition injection test warning lamp
(15)Battery
(16)Immobiliser unit
(17) Air conditioning
(18) Instrument panel
(19)Fuel tank
(20)Fuel pump, gauge and filter assembly(21)Canister reservoir
(22) Downstream oxygen sensor
(23)Upstream oxygen sensor
(24)Air inlet valve
(25)EGR electrovalve
(26)Camshaft position sensor
(27) Ignition coil
(28)Sparking plug
(29) Injector supply rail
(30)Injectors
(31) Air inlet pressure sensor
(32) Engine coolant temperature sensor
(33) Engine speed sensor
(34)Cooling fan unit
(35) Knock sensor
B1HP1C5P
139
INJECTION

Downloaded from www.Manualslib.com manuals search engine 141
INJECTION
FEATURES OF MULTIPOINT INJECTION SYSTEM
Electrical circuit
(diagr.) Component Supplier Reference Observations
3
26
35
32
33
2
28
27Engine management ECU
with «FRIC»
Camshaft position sensor
Knock sensor
Engine coolant temperature sensor
Engine speed sensor
Power steering pressure sensor
Sparking plug
Ignition coilSAGEM
MAGNETI
MARELLIS2000
MM 48.P2
(1)
144323
F 207 326
257 603 2A
14 43 32
402 244 03
14 43 27
280 291
RFN52HZ
FR8ME
BBC2.2NDE
2 526 118 ELECTRIFIL
SIEMENS
SAGEM (1)
ELECTRIFIL
DAV
ELECTRIFIL
BITRON
(1)= EngineRFN
Ignition circuit
SAGEM
BOSCH
SAGEM
«Flash» eprom (reprogrammable eprom), sequential injection,
112 way connector.
3 way grey connector, fixed on the cylinder head
2 way black connector, fixed on the front part of the engine
block, tightening torque 2 ± 0.5 m.daN.
2 way green connector, fixed on the coolant outlet housing,
tightening torque 1.8 ± 0.1 m.daN.
2 way black connector, fixed on the clutch casing.
2 way blue connector, fixed on the power steering high pressure
pump outlet tube, tightening torque 2 ± 0.2 m.daN.
Electrode gap = 1mm.
Tightening torque 2.5 ± 0.2 m.daN.
4 way black connector.

Downloaded from www.Manualslib.com manuals search engine FEATURES OF MULTIPOINT INJECTION SYSTEM
Summary
1)Accelerator pedal position sensor
(2)Denox catalyser downstream oxygen sensor
(3)Denox catalyser
(4)Downstream exhaust gas temperature sensor
(5)3-function precatalyser
(6)Precatalyser upstream oxygen sensor
(7) Upstream exhaust gas temperature sensor
(8)Petrol pressure regulator
(9)Petrol high pressure pump
(10)Knock sensor
(11) EGR electrovalve
(12)Canister purge electrovalve
(13)Motorised butterfly housing
(14)Canister reservoir
(15)Fuel pump and tank assembly
(16) Fuel tank
(17)Inlet air temperature sensor
(18) Inlet air pressure sensor(19)Engine coolant temperature sensor
(20) Sparking plug
(21) Ignition coil block
(22) High pressure injector
(23) Engine oil temperature sensor
(24)Engine speed sensor
(25)Inlet camshaft dephaser electrovalve
(26) Camshaft position sensor
(27)Petrol high pressure sensor
(28) Power steering pressure sensor
(29) Aircon fluid pressure sensor
(30)Cooling fan unit
(31)ABS block
(32)Clutch pedal sensor
(33)Brake pedal sensor
(34)Air conditioning ECU
(35) Engine management ECU
(36)Built-in systems interface BSI
(37)Rev counter
(38) Coded immobiliser
(39)Vehicle cruise control
(40) Diagnostic connector
B1HP1C6P
143
INJECTION

Downloaded from www.Manualslib.com manuals search engine FEATURES OF MULTIPOINT INJECTION SYSTEM
Electrical circuit
(diagr.) Component Supplier Reference Observations
35Engine management ECU
with «FRIC»
26Camshaft position sensor
10Knock sensor
9Engine coolant temperature
sensor
1Accelerator pedal position sensor
24Engine speed sensor
28Power steering pressure sensor
25Inlet camshaft dephaser electrovalve.112 way connector.
3 way grey connector, fixed on the cylinder head.
2 way black connector, fixed on the front part of the engine
block.
ESSENTIAL:Respect the tightening torque 2,5±0,5 m.daN.
2 way green connector, fixed on the coolant outlet housing.
4 way black connector, fixed on the pedal carriage.
2 way black connector, fixed on the clutch casing.
2 way blue connector, fixed on the power steering high pressure
pump outlet tube, tighten to 2 ± 0,2 m.daN.
2 way green connector, fixed on the upper part of the cylinder
head. SIEMENS
ELECTRIFIL
SIEMENS
ELECTRIFIL
BITRON
UNISIASIRIUS 81
F207 326
145
INJECTION

Downloaded from www.Manualslib.com manuals search engine 147
INJECTION
FEATURES OF BOSCH ME 7.4.6 MULTIPOINT INJECTION SYSTEM
Summary
(1) Rev counter
(2)Consumption information
(3)Ignition injection test warning lamp
(4) Air conditioning ECU (according to equipment)
(5)Multifunction screen
(6)Built-in systems interface (BSI)
(7) Transponder
(8)Automatic gearbox ECU(according to equipment)
(9 Pump, fuel filter and pressure regulator assembly
(10)Battery
(11)Pressostat
(12)Engine speed sensor
(13)Camshaft position sensors (x2)
(14)Motorised butterfly housing
(15)Canister purge electrovalve
(16)Cooling fan unit
(17)Pencil type ignition coils (x2)
(18) Petrol injectors (x6)(19) Variable timing electrovalves (x2)
(20)Upstream oxygen sensors (x2)
(21) Downstream oxygen sensors (x2)
(22)Engine coolant thermal sensor
(23) Knock sensors (x2)
(24)Power steering pressure sensor
(25) Integral pressure sensor
(26)Accelerator pedal position sensor
(27)Inlet air thermal sensor
(28) Diagnostic connector
(29) Multifunction double relay
(30) Ignition injection ECU
B1HP1B2P

Downloaded from www.Manualslib.com manuals search engine 150
INJECTION
FEATURES OF BOSCH ME 7.4.6 MULTIPOINT INJECTION SYSTEM
Electrical circuit
(diagr.) Component Supplier Reference Observations
30Ignition injection ECU
29Multifunction double relay
(incorporated in the engine fusebox)
24Power steering pressure sensor
27Inlet air thermal sensor
13Camshaft position sensor
23Knock sensor
22Engine coolant thermal sensor
12Engine speed sensor128 way connector, flash eprom type sequential injection
(reprogrammable eprom). Installed in the ECU compartment.
Main relay 1, 16 way grey connector.
Main relay 2, 16 way green connector
Power relay 3, 16 way black connector
Installed in the ECU compartment.
2 way blue connector, switch opens at 20 Bars, for ECU
information (steering wheel on full lock). Ring seal marked
violet, fixed on the power steering 4 way hydraulic union,
beneath the vehicle.
2 way grey connector, fixed on the air filter inlet duct.
3 way grey connector, fixed on the inlet camshaft bearing
cap cover.
3 way green connector, fixed on the central part of the engine
block V.
ESSENTIAL : respect the tightening torque 2 ± 0,2 m.daN.
2 way green connector, fixed on the coolant outlet housing.
Tighten to 2 ± 0.2 m.daN
2 way black connector, fixed on the gearbox clutch casing. BOSCH
SIEMENS
BITRON
JAEGER
ELECTRIFIL
BOSCH
DAV
ELECTRIFIL
ELECTRIFILME 7.4.6
0261206418
S210500000
402 084 01
14 43 25
026123125
402 243 03
14 43 32
14 43 28