cooling Citroen C5 2000 (DC/DE) / 1.G Owner's Manual

Downloaded from www.Manualslib.com manuals search engine INJECTION
Idling - antipollution 111
Petrol injection 112
Emission standards 113 - 119
Prohibited operations : HDi 120 - 121
Safety requirements : HDi 122 - 123
Checking the fuel supply circuit 124 - 125
Checking the air supply circuit 126 - 130
Exhaust gas recycling 131 - 134
Checking turbo pressure 135 - 138
Features of injection systems 139 - 168
IGNITION
Sparking plugs 169
CLUTCH-GEARBOX
Speedometers 170
Clutch specifications 171 - 172
Gearbox and tyre specifications 173 - 174
BE4/5 gearbox controls 175 - 183
ML/5 gearbox controls 184 - 192
AL4-4HP20 gearbox controls 193 - 203
Driveshafts 204
AXLES-SUSPENSION
Wheels and tyres 205 - 211
Axle geometry 212 - 214
Front and rear axle 215 - 216Suspension 217 - 220
Steering specifications 221 - 222
BRAKES
Brake specifications 223 - 228
Handbrake adjustment 229
Bleeding and filling braking system 230 - 233
HYDRAULICS
Specifications 234 - 237
Suspension spheres 238 - 240
ELECTRICAL
Starter motors 241
Alternators 242
Charging circuit 243
AIR CONDITIONING
Quantities in R 134a aircon system 244
Special features 245
Pollen filter 246
Dryer cartridge 247 - 249
Checking oil level 250 - 251
Checking pressures 252
Air conditioning : 6FN-RFN-RLZ 253
Air conditioning circuit : XFX 254
Air conditioning circuit : RHY-RHZ 255
Air conditioning circuit : 4HX 256
INDEX
GENERAL
Identification of vehicles 1 - 4
General : Dimensions 5 - 6
Weight specifications 7 - 8
Towing specifications 9 - 10
Lifting / supporting the vehicle 11 - 14
Capacities 15 - 18
Lubricants 19 - 32
ENGINES
Engine specifications 34 - 58
Cylinder head marking / tightening
6FZ-RFN-RLZ 38
XFX 51 - 52
RHY-RLZ 55 - 56
4HX 57 - 58
Auxiliaries drive belt 59 - 68
Checking and setting valve timing 69 - 90
Power unit suspension 91 - 95
Exhaust system 96 - 100
Cooling system 101 - 107
Checking oil pressures 108
Oil filter 109
Filling and bleeding engine coolant 110

Downloaded from www.Manualslib.com manuals search engine GENERAL
Engine type
Engine with filter change
Between Min. and Max.
5-speed gearbox
Automatic gearbox
After oil change
Braking circuit
Hydraulic circuit
Cooling system
Fuel tank capacity
6FZ RFN RLZ RHY RHZ
4.25 4.75
1.7 1.5
1.8 1.8 1.8 1.8
6 6 8.3
3 3 5.3
4.3
8.8 – 9.3 (*) 8.8 10.7
66 68
16
CAPACITIES (in litres)
1.8i 16V 2.0i 16V 2.0 HPi 2.0 HDiPetrol
Diesel
Vehicle without air conditioning
(*) = With automatic gearbox
ESSENTIAL : Systematically check the oil level using the oil dipstick.
Auto.Auto.Auto.

Downloaded from www.Manualslib.com manuals search engine GENERAL
17
Engine type
Engine with filter change
Between Min. and Max.
5-speed gearbox
Automatic gearbox
After oil change
Braking circuit
Hydraulic circuit
Cooling system
Fuel tank capacity
CAPACITIES (in litres)
Petrol
Vehicle with air conditioning
(*) = With automatic gearbox.
ESSENTIAL : Systematically check the oil level using the oil dipstick.
1.8i 16V 2.0i 16V 3.0i V6
Auto.Auto.Auto.
6FZ RFN RLZ XFX
4.25 5.25
1.7 2
1.8 1.8 1.8
6 6 8.3
3 3 5.3
4.3
8.8 – 9.3 (*) 8.8 14
662.0 HPi

Downloaded from www.Manualslib.com manuals search engine 18
GENERAL
Engine type
Engine with filter change
EBetween Min. and Max.
5-speed gearbox
Automatic gearbox
After oil change
Braking circuit
Hydraulic circuit
Cooling system
Fuel tank capacity
CAPACITIES (in litres)
Diesel
Vehicle with air conditioning
ESSENTIAL : Systematically check the oil level using the oil dipstick
RHY RHZ 4HX
4.5 4.75
1.7 1.5
1.8 1.8
6 8.3
3 5.3
4.3
10.7 - 11.7 - (With additional heating).
68 2.0 HDi 2.2 HDi
Auto.
Auto.

Downloaded from www.Manualslib.com manuals search engine ENGINE
43 Oil pump
- Pre-tightening0.7
- Tightening0.9 ± 0.1 1.3 ± 0.1 0.9 ± 0.1
Water / oil heat exhanger5.8 ± 0.5
Lubrication pipe
- Engine end3 ± 0.3
- Turbocompressor end2 ± 0.2
Injection circuit
Injector(Flange nut)
- Tightening3 ± 0.3 4 ± 0.3
- Angular tightening45°±5°
Union on injection rail2 ± 0.2
Injection pump0.5 ± 0.1 2.25 ±0.3
Union on injector 2 ± 0.2
Common rail fixing screw 0.9 ± 0.1 0.8 ± 0.1
Injection pump pulley5 ± 0.5
Union on injection pump 2.6 ± 0.3 2 ± .02
Cooling circuit
Water pump 1.4 ± 0.1 1.6 ± 0.3
Water inlet housing 0.9 ± 0.1 2 ± .02
Engines : 6FZ-RFN-RLZ-RHY-RHZ-4HX
Lubrication circuit Diesel Petrol
6FZ RFN RJZ RHY RHZ 4HX
SPECIAL FEATURES : TIGHTENING TORQUES ( m.daN)

Downloaded from www.Manualslib.com manuals search engine ENGINE
101
6FZ RFN RLZ RHY RHZ
8.8 - 9.3 (*) 8.8
21dm
2
1.4 bar
89°C 83°C
1x250W (1-speed) 1x350 W (2-speed)
91°C 97°C
105°C
11 8 ° C
6 mn (Max.)
(*) = With automatic gearbox
COOLING SYSTEM SPECIFICATIONS
Engines : 6FZ – RFN - RLZ - RHY - RHZVehicle without air conditioning
Engine plate
Capacity
Radiator surface
Pressurisation
Opening of thermostatic
regulator
Cooling fan
1st speed
2nd speed
Warning
Post-cooling1.8i 16V
2.0i 16V
3.0i 16V 2.0 HDi

Downloaded from www.Manualslib.com manuals search engine 6FZ RFN RLZ XFX RHY RHZ 4HX
8.8 - 9.3 (*) 8.8 14 10.7 (*)
27 dm
221 dm2
1.4 bar
89°C 78°C 89°C
1x500 W 3-speed
1 = 97°C 10 Bars
2 = 101°C 17 Bars
3 = 105°C 22 Bars
11 5 ° C 11 2 ° C 11 5 ° C
11 8 ° C
6 minutes (Max.)
ENGINE
102
COOLING SYSTEM SPECIFICATIONS
Engines : 6FZ - RFN - RLZ - XFX - RHY - RHZ - 4HXVehicle with air conditioning
Engine plate
Capacity
Radiator surface
Pressurisation
Opening of thermostatic
regulator
Cooling fan
1st speed
2nd speed
3rd speed
Aircon cut-out
Warning
Post-cooling1.8i 16V
2.0i 16V 2.0 HPi
3.0i 16V 2.0 HDi 2.2 HDi
(*) = With automatic gearbox

Downloaded from www.Manualslib.com manuals search engine ENGINE
103
COOLING SYSTEM SPECIFICATIONS
Engines : 6FZ - RFN
(1) Venting chamber.
(2) Water pump.
(3)Heater matrix.
(4)Bleed screw, heater matrix.
(5) Drain screw, cylinder cover.
(6)Water outlet housing.
(7)Bleed screw, water outlet housing.
(8)Drain screw, cooling radiator.
(9) Plug, cooling radiator.
(10)Cooling radiator.
Thermostat tightening : 1.7 ± 0.2 m.daN
B1GP08VP

Downloaded from www.Manualslib.com manuals search engine ENGINE
104
COOLING SYSTEM SPECIFICATIONS
Engine : RLZ
(1) Venting chamber
(2) Water pump
(3)Heater matrix
(4).Bleed screw, heater matrix
(5)Drain screw, cylinder block
(6) Coolant outlet housing
(7) Bleed screw, coolant outlet housing
(8) Bleed screw, top hose.
(9) Cooling radiator.
(10) Drain screw, cooling radiator
(11)Drain screw, cooling radiator.
Thermostat tightening : 1.7 ± 0.2m.daN
B1GP08JP

Downloaded from www.Manualslib.com manuals search engine ENGINE
105
COOLING SYSTEM SPECIFICATIONS
Engine : XFX
(1)Heater matrix
(2)Venting chamber
(3) Thermostat.
(4) Coolant outlet housing
(5) Coolant inlet housing
(6) Engine cooling radiator
(7) Venting chamber
(8) Bleed screw
(9) Water / oil exchanger
(10) Thermostat
(11) Thermostat(Coolant outlet housing)
(12) Thermal switch
(10). (11)and (12): Tightening 1.7 ± 0.4 m.daN
B1GP041P