ignition Citroen C5 2016 (RD/TD) / 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2016, Model line: C5, Model: Citroen C5 2016 (RD/TD) / 2.GPages: 366, PDF Size: 30.93 MB
Page 6 of 366

4
C5_en_Chap00b_vue-ensemble_ed01-2015
Exterior (Saloon)
Sunroof  61
Roof bars  218
a ccessories   221-222
Changing bulbs  197-198, 201
-  rear lamps
-  3
rd brake lamp
-  number plate lamps
Boot
  58
Temporary puncture   
repair kit  181-184
Changing a wheel  185 -191
- tools
-  removing
AdBlue additive, topping-up  239 -241
Tyre under-inflation detection  118 -119
Braking assistance  150
Trajectory control  151-153
Tyre pressures  118, 250
Snow chains  192Fuel tank 
177, 179
Misfuel prevention  178
Remote control key 
45 - 49
-  opening / closing
- battery
Ignition switch / Steering lock / Starting 97- 9 9
Alarm   50-52
Door mirrors  69
Exterior lighting 
 
c o nt r o ls   13 6 -14 0
Headlamp adjustment  141
Changing bulbs   193-196
-  front lamps
-  Xenon headlamps
-  foglamps
-  direction indicator repeaters
Lane departure warning   system  128
Stop & Start  115 -118
Very cold climate screen  220
Doors  55 -57
-  opening / closing
-  central locking
-  emergency control
Child lock  176
Electric windows  53 -54 Front and/or rear  
parking sensors  131-132
Towbar   216 -217
Towing   214 -215 
over view  
Page 7 of 366

5
C5_en_Chap00b_vue-ensemble_ed01-2015
Exterior (Tourer)
Panoramic sunroof 62- 63
Roof bars  218
a ccessories   221-222
Changing bulbs   199-201
-  rear lamps
-  3rd brake lamp
-  number plate lamps
Boot
  59-60
Reversing camera  133
Temporary puncture   
repair kit  181-184
Changing a wheel  185 -191
- tools
-  removing
AdBlue additive, topping-up  239 -241
Tyre under-inflation detection  118 -119
Braking assistance  150
Trajectory control  151-153
Tyre pressures  118, 250
Snow chains  192
Remote control key 
45 - 49
-  opening / closing
- battery
Ignition switch / Steering lock / Starting 97- 9 9
Alarm   50-52
Fuel tank 177, 179
Misfuel prevention  178
Door mirrors  69
Exterior lighting 
 
c o nt r o ls   13 6 -14 0
Headlamp adjustment  141
Changing bulbs   193-196
-  front lamps
-  Xenon headlamps
-  foglamps
-  direction indicator repeaters
Lane departure warning   system  128
Stop & Start  115 -118
Very cold climate screen  220
Doors  55 -57
-  opening / closing
-  central locking
-  emergency control
Child lock  176
Electric windows  53 -54 Front and/or rear  
parking sensors  131-132
Towbar   216 -217
Towing   214 -215
. 
over view  
Page 21 of 366

19
C5_en_Chap01_controle-de-marche_ed01-2015
A few definitions…
Range
(miles or km)
The distance which can still be 
travelled with the fuel remaining 
in the tank (at the average fuel 
consumption seen over the last 
few miles (kilometres) travelled).
Current fuel consumption
(mpg or l/100 km or km/l)
Calculated over the last few seconds.
Average fuel consumption
(mpg or l/100 km or km/l)
Calculated since the last trip 
computer reset.
Average speed
(mph or km/h)
Calculated since the last trip 
computer reset.
When the range falls below 20 miles (30 km), 
dashes are displayed. After filling with at least 
5 litres of fuel, the range is recalculated and is 
displayed when it exceeds 60 miles (100 km).
Stop & Start time 
counter
(minutes / seconds or hours / 
minutes)
If your vehicle is fitted with 
Stop & Start, a time counter 
calculates the time spent in 
STOP mode during a journey. 
It resets to zero every time the 
ignition is switched on with 
the key.
This function is only displayed from 
20 mph (30 km/h).
This value may vary following a change 
in the style of driving or the relief, 
resulting in a significant change in the 
current fuel consumption.
If dashes are displayed continuously 
while driving in place of the digits, 
contact a CITR oËn dealer or a 
qualified workshop.
Distance travelled
(miles or km)
Calculated since the last trip 
computer reset.
The fuel consumption of your vehicle 
will be higher than the official figures 
obtained by CITROËN during the first 
1 800 miles (3 000 km) of the vehicle's 
life.
1 
Monitoring  
Page 23 of 366

21
C5_en_Chap01_controle-de-marche_ed01-2015
Engine oil temperature 
gauge
Under normal operating conditions, the bars 
should be within section 1.
In severe operating conditions, the bars may 
extend into section 2 .
In this event, slow down, and if necessary, 
stop the engine and check the levels (see the 
corresponding section).
Coolant temperature gauge
Under normal operating conditions, the bars 
should be within section 1 .
In severe operating conditions, the bars may 
extend into section 2 , the engine coolant 
temperature warning lamp A and the STOP  
warning lamp come on in the instrument panel. 
Stop  as soon as it is safe to do so . Switch off 
the ignition. The cooling fan may continue to 
operate for a cer tain time .
Contact a CITROËN dealer or a qualified 
workshop.
If the SERVICE  warning lamp comes on, check 
the levels (see the corresponding section). On horizontal ground, illumination of the fuel 
low warning lamp indicates that you are at the 
reser ve level.
An alert message is displayed in the instrument 
panel.
Fuel gauge
Indicators
1 
Monitoring  
Page 24 of 366

22
C5_en_Chap01_controle-de-marche_ed01-2015
More than 1 800 miles (3 000 km) 
remain before the next service is 
due
When the ignition is switched on, no service 
information appears in the instrument panel 
screen.
Between 600 miles (1 000 km) 
and 1 800 miles (3 000 km) remain 
before the next service is due
For a few seconds after the ignition is switched 
on, the spanner symbolising the service 
operations comes on and a message is displayed 
in the instrument panel indicating the distance or 
time remaining before the next service is due.
Example: 1 900 miles (2 800 km) remain 
before the next service is due.
When the ignition is switched on, the instrument 
panel screen temporarily indicates:
Less than 600 miles (1 000 km) 
remain before the next service is 
due
Example:  500 miles (900 km) remain before 
the next service is due.
For a few seconds after the ignition is switched 
on, the instrument panel screen indicates:
After the message disappears, the spanner 
remains on  alongside the mileage recorder as 
a reminder that a service must be carried out 
soon.
Service indicator
System which informs the driver when the 
next service is due, in accordance with the 
manufacturer's service schedule.
The point at which the service is due is 
calculated from the last service indicator reset 
to zero, according to the mileage covered and 
the time elapsed since the last service.
A few seconds after the ignition is switched on, 
the spanner goes off.
For BlueHDi Diesel versions, depending 
on the country of sale, the degree of 
deterioration of the engine oil may also 
be taken into account. 
Monitoring  
Page 25 of 366

23
C5_en_Chap01_controle-de-marche_ed01-2015
Service indicator zero resetService overdue
For a few seconds after the ignition is switched 
on, the spanner flashes to indicate that 
the service must be carried out as soon as 
possible.
Example:  the service is overdue by 180 miles 
(300 km).
When the ignition is switched on, the 
instrument panel screen indicates:
The spanner remains on  alongside the 
mileage recorder to indicate that a service is 
overdue. For b
lueHdi d iesel versions, the 
spanner may also come on early, 
according to the level of deterioration 
of the engine oil, which depends on the 
driving conditions in which the vehicle 
is used. After each service, the service indicator must 
be reset to zero.
The procedure for resetting to zero is as 
follows:
F 
switch off the ignition,
F  press and hold the trip distance recorder 
zero reset button,
F  switch on the ignition; the distance recorder 
display begins a countdown,
F  when the display indicates "=0" , release 
the button; the spanner disappears.
Following this operation, if you wish to 
disconnect the battery, lock the vehicle and 
wait at least five minutes for the zero reset to 
be taken into account.
With b
lueHdi d iesel versions, the 
Service  warning lamp also comes on 
when the ignition is switched on. The spanner may come on if you have 
exceeded the period since the last service, 
as indicated in the manufacturer's service 
schedule.
1 
Monitoring  
Page 27 of 366

25
C5_en_Chap01_controle-de-marche_ed01-2015
Distance recordersLighting dimmer
F Press button A to decrease the brightness 
of the instruments and controls.
F  Press button B to increase the brightness 
of the instruments and controls.
Deactivation
When the lighting is off, or in day mode on 
vehicles fitted with daytime running lamps, 
pressing the buttons does not have any effect.
Total distance recorder
When travelling abroad, you may 
have to change the units of distance: 
the display of road speed must be in 
the official units (miles or km) for the 
country. The change of units is done via 
the screen configuration menu, with the 
vehicle stationary.
The total and trip distances are displayed for 
thirty seconds when the ignition is switched off, 
when the driver's door is opened and when the 
vehicle is locked or unlocked.
System for manual adjustment of the 
brightness of the instruments and controls in 
relation to the exterior brightness.
Trip distance recorder
It measures the total distance travelled by the 
vehicle since its first registration.
Operation
It measures the distance travelled since it was 
reset to zero by the driver.
F 
With the ignition on, press the button until 
zeros appear.
1 
Monitoring  
Page 28 of 366

26
C5_en_Chap01_controle-de-marche_ed01-2015
Warning and indicator lamps
Visual indicators which inform the driver of the occurrence of a malfunction or fault (warning lamp) 
or of the operation of a system (operation or deactivation indicator lamp).
When the ignition is switched on
Certain warning lamps come on for a few 
seconds when the ignition is switched on.
When the engine is started, these warning 
lamps should go off.
If they remain on, before moving off, refer to the 
information for the warning lamp concerned.Associated warnings
The illumination, fixed or flashing, of certain 
warning lamps may be accompanied by an 
audible signal and a message in the screen.Warning lamps
When the engine is running or the vehicle is 
being driven, the illumination of one of the 
following warning lamps indicates a malfunction 
or fault which requires action on the part of 
the
 driver.
The illumination of a warning lamp is always 
accompanied by the display of an additional 
message, to assist you in identifying the fault.
If you encounter any problems, contact a 
CITROËN dealer or a qualified workshop. 
Monitoring  
Page 29 of 366

27
C5_en_Chap01_controle-de-marche_ed01-2015
Warning/indicator  lampis on Cause Action / Observations
STOP fixed, associated with 
another warning lamp. It is associated with the braking 
system or the engine coolant 
temperature. Stop as soon as it is safe to do so.
Park, switch off the ignition and call a CITROËN 
dealer or a qualified workshop.
Service temporarily, 
accompanied by 
a message. One or more minor faults for which 
there is no specific warning lamp 
have been detected. Identify the cause of the fault using the message 
displayed in the screen.
You can deal with some problems yourself, such as a 
door open or the start of saturation of the particle filter 
(as soon as the traffic conditions allow, regenerate 
the filter by driving at a speed of at least 40 mph 
(60 km/h), until the warning lamp goes off).
For any other problems, such as a fault with the tyre 
under inflation detection system, contact a CITROËN 
dealer or a qualified workshop.
fixed, accompanied by 
a message. One or more major faults for which 
there is no specific warning lamp 
have been detected. Identify the cause of the fault using the message 
displayed in the screen; you must then contact a 
CITROËN dealer or a qualified workshop.
fixed, associated with the 
flashing and then fixed 
display of the service 
indicator spanner.The servicing interval has been 
exceeded.
Only on BlueHDi Diesel versions.
Your vehicle must be serviced as soon as possible.
1 
Monitoring  
Page 30 of 366

28
C5_en_Chap01_controle-de-marche_ed01-2015
Brakingfixed, associated with 
the STOP warning 
lamp. The braking system fluid level is too 
low.
You must stop as soon as it is safe to do so.
Top up with brake fluid recommended by CITROËN.
If the problem persists, have the system checked by a 
CITROËN dealer or a qualified workshop.
+ fixed, associated with 
the SToP and ab S 
warning lamps. The electronic brake force distribution 
(EBFD) system has a fault.
You must stop as soon as it is safe to do so.
Have it checked by a CITROËN dealer or a qualified 
workshop.
Warning
/indicator  lampis on Cause Action / Observations
Anti-lock 
Braking System 
(ABS) fixed.
The anti-lock braking system has a 
fault. The vehicle retains conventional braking.
d
rive carefully at reduced speed and contact a 
CITROËN dealer or a qualified workshop without 
d e l ay.
Electric parking 
brake flashing.
The electric parking brake is not 
applied automatically.
The application/release is faulty. You must stop as soon as it is safe to do so.
Park on flat level ground, engage a gear (or place the 
lever in position P for an automatic gearbox), switch 
off the ignition and contact a CITROËN dealer or a 
qualified workshop.
Electric parking 
brake fault fixed.
The electric parking brake has a fault. Contact a CITROËN dealer or a qualified workshop 
without delay.
For more information on the electric parking brake, 
refer to the corresponding section. 
Monitoring