headlamp Citroen C5 DAG 2008.5 (RD/TD) / 2.G User Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008.5, Model line: C5 DAG, Model: Citroen C5 DAG 2008.5 (RD/TD) / 2.GPages: 306, PDF Size: 18.85 MB
Page 154 of 306
154
10
C H E C K S 3 litre V6 petrol engine
1. Screen wash and headlamp
wash reservoir.
2. P o w e r s t e e r i n g a n d s u s p e n s i o n
fl u i d r e s e r v o i r .
3. Engine coolant reservoir.
4. Engine oil gauge.
5. Engine oil topping-up.
6. B r a k e fl u i d r e s e r v o i r .
7. Battery.
8. A i r fi l t e r .
3.0i V6
Page 155 of 306
155
10
C H E C K S
DIESEL ENGINES
They allow you access for checking
t h e l e v e l o f t h e v a r i o u s fl u i d s , f o r r e -
placing certain components and for
repriming the fuel.
1. Screenwash and headlamp
wash reservoir.
2. P o w e r s t e e r i n g fl u i d r e s e r v o i r o r
power steering and suspension
fl u i d r e s e r v o i r , d e p e n d i n g o n
equipment.
3. Coolant reservoir.
4. Dipstick.
5. E n g i n e o i l fi l l e r c a p .
6. A i r fi l t e r .
7. B r a k e fl u i d r e s e r v o i r .
8. Battery.
As the diesel circuit is pres-
surised, any work on this
circuit is prohibited.
V e h i c l e s fi t t e d w i t h t h e HDi 138
e n g i n e m a y b e fi t t e d w i t h m e t a l
suspension. In this case, a differ-
e n t p o w e r s t e e r i n g fl u i d r e s e r v o i r i s
fi t t e d .
HDi 110
HDi 138
Page 156 of 306
156
10
C H E C K S HDi 173 - V6 HDi 208 engines
(with particle filter)
1. Screen wash and headlamp
wash reservoir.
2. P o w e r s t e e r i n g a n d s u s p e n s i o n
fl u i d r e s e r v o i r .
3. Engine coolant reservoir.
4. Engine oil gauge.
5. Engine oil topping-up.
6. A i r fi l t e r .
7. B r a k e fl u i d r e s e r v o i r .
8. Battery.
9. "+" and "-" terminals for starting
with an assisting battery.
The diesel fuel circuit being
under high pressure:
- Any intervention on the circuit is prohibited.
- HDi engines are the result of advanced technology.
Any intervention requires spe-
c i a l q u a l i fi c a t i o n s w h i c h o n l y a
CITROËN dealer can guarantee.
HDi 173
V6 HDi 208
Page 158 of 306
158
10
C H E C K S
Screenwash and headlamp
wash fluid
F l u i d s p e c i fi c a t i o n
For optimum cleaning and to avoid
f r e e z i n g , t h i s fl u i d m u s t n o t b e
topped up or replaced with water.
Reservoir capacities:
-
screenwash: approximately 3.5 litres,
- screenwash and headlamp wash: approximately 6.15 litres. Diesel additive level (Diesel
engine with particle emission
filter)
A low additive level is indicated by
lighting of the service warning light,
accompanied by an audible warning
and a message on the multifunction
display.
Topping up
This additive must be topped up by
a CITROËN dealer without delay.
Used products
Avoid prolonged contact of
u s e d o i l o r fl u i d s w i t h t h e
skin.
M o s t o f t h e s e fl u i d s a r e h a r m f u l t o
health or indeed very corrosive.
Do not discard used oil or
fl u i d s i n t o s e w e r s o r o n t o
the ground.
Empty used oil into the contain-
ers provided for this purpose in the
CITROËN network.
I n t h e c a s e o f v e h i c l e s fi t t e d
with headlamp washers, the
m i n i m u m l e v e l o f t h i s fl u i d i s
indicated by an audible signal
and a message on the multifunction
display.
Top up the level when you stop the
vehicle.
Coolant level
Draining the circuit
The coolant does not have to be
changed.
F l u i d s p e c i fi c a t i o n
The coolant must conform to the
manufacturer's recommendations. The coolant level should be
close to the "MAX" mark but
should never exceed it.
When the engine is warm, the tem-
perature of the coolant is regulated
by the fan. This can operate with the
ignition off.
O n v e h i c l e s w h i c h a r e fi t t e d w i t h
a p a r t i c l e e m i s s i o n fi l t e r , t h e f a n
may operate after the vehicle has
been switched off, even if the en-
gine is cold.
In addition, as the cooling system is
pressurised, wait at least one hour
after switching off the engine before
carrying out any work.
To avoid any risk of scalding, unscrew
the cap by two turns to allow the pres-
sure to drop. When the pressure has
dropped, remove the cap and top up
the level.
Page 169 of 306
1 6 8
P R A C T I C A L I N F O R M A T I O N
CHANGING A BULB
Operating procedure for replacing a
f a u l t y b u l b w i t h a n e w b u l b w i t h o u t
t h e u s e o f a n y t o o l s .
Headlamps
Model with Xenon headlamps (D1S)
1. Sidelamps: W 5 W
2. Dual-function Xenon
headlamps (dipped/main): D1S
3. Angular lighting: HP19
4. Daytime-running lamps: HP24 Changing sidelamps
Lift up the pegs A t o r e m o v e t h e
c o v e r o n t h e h e a d l a m p .
R e m o v e t h e p r o t e c t i v e c a p B .
P u l l t h e b u l b h o l d e r t o r e m o v e i t .
Replace the bulb and replace
t h e b u l b h o l d e r .
F o r t h e m a i n t e n a n c e o f t h e f r o n t
h e a d l a m p u n i t a n d t h e c h a n g i n g o f
H P 1 9 , D 1 S a n d H P 2 1 b u l b s , c o n t a c t
a C I T R O Ë N d e a l e r .
Risk of electrocution
X e n o n b u l b s m u s t b e r e -
p l a c e d b y a C I T R O Ë N
d e a l e r .
You are advised to change the
D 1 S b u l b s a t t h e s a m e t i m e ,
i f o n e o f t h e m h a s f a i l e d .
Replace the protective cap B .
R e p l a c e t h e c o v e r a n d fi x i t i n
place using the pegs A .
Page 170 of 306
169
11
P R A C T I C A L I N F O R M A T I O N Changing main beams Changing sidelamps
Lift up the pegs A t o r e m o v e t h e
c o v e r o n t h e h e a d l a m p .
R e m o v e t h e p r o t e c t i v e c a p B .
D i s e n g a g e t h e r e t a i n i n g s p r i n g .
R e m o v e t h e b u l b a n d r e p l a c e i t ,
p a y i n g a t t e n t i o n t o t h e d i r e c t i o n
o f fi t t i n g .
R e p l a c e t h e r e t a i n i n g s p r i n g .
Replace the protective cap B .
R e p l a c e t h e c o v e r a n d fi x i t i n
place using the pegs A .
Lift up the pegs A t o r e m o v e t h e
c o v e r o n t h e h e a d l a m p .
R e m o v e t h e p r o t e c t i v e c a p B .
P u l l t h e b u l b h o l d e r t o r e m o v e i t .
Replace the bulb and replace
t h e b u l b h o l d e r .
Replace the protective cap B .
R e p l a c e t h e c o v e r a n d fi x i t i n
place using the pegs A .
Model with halogen headlamps
1. Main beams: H1
2. Sidelamps: W 5 W
3. Dipped beams: H7
4. Directional lighting: H7
5. Daytime-running lamps: HP24
F o r t h e m a i n t e n a n c e o f t h e f r o n t
h e a d l a m p u n i t a n d t h e c h a n g i n g o f
H P 2 4 b u l b s , c o n t a c t a C I T R O Ë N
d e a l e r . H a l o g e n b u l b s m u s t n o t b e c h a n g e d
u n t i l t h e y h a v e b e e n o f f f o r a f e w
m i n u t e s ( r i s k o f s e r i o u s b u r n s ) .
D o n o t t o u c h t h e b u l b d i r e c t l y w i t h
y o u r fi n g e r s , u s e a l i n t - f r e e c l o t h .
I t i s e s s e n t i a l t h a t o n l y a n t i - U . V .
t y p e b u l b s a r e u s e d i n o r d e r n o t t o
d a m a g e t h e h e a d l a m p .
Page 295 of 306
156
10
C H E C K S HDi 173 -
V6 HDi 240 engines
(with particle filter)
1. Screen wash and headlamp
wash reservoir.
2. Power steering and suspension
fl u i d r e s e r v o i r .
3. Engine coolant reservoir.
4. Engine oil dipstick.
5. E n g i n e o i l fi l l e r c a p .
6. A i r fi l t e r .
7. B r a k e fl u i d r e s e r v o i r .
8. Battery.
9. "+" and "-" terminals for starting
with a slave battery.
The diesel fuel system
being under high pres-
sure:
- Any intervention on the system
is prohibited.
- HDi engines are the result of advanced technology.
Any intervention requires spe-
c i a l q u a l i fi c a t i o n s w h i c h o n l y a
CITROËN dealer can guarantee.
HDi 173
V6 HDi 240