headlamp Citroen C5 DAG 2008.5 (RD/TD) / 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008.5, Model line: C5 DAG, Model: Citroen C5 DAG 2008.5 (RD/TD) / 2.GPages: 306, PDF Size: 18.85 MB
Page 69 of 306

83 
V I S I B I L I T Y
5
           LIGHTING CONTROLS 
 System  for  selection  and  control  of  
the various front and rear lights pro-
viding the vehicle's lighting.  
  Main lighting  
 The  various  front  and  rear  lights  of  
the  vehicle  are  designed  to  adapt 
the driver's visibility progressively in 
relation to the climatic conditions:  
   -   side lights, to be seen, 
  -   dipped headlamps to see without dazzling other drivers, 
  -   main  beam  headlamps  to  see  clearly when the road is clear, 
  -   directional  headlamps  for  im- proved visibility when cornering.   
  Additional lighting  
   O t h e r    l i g h t s    a r e    i n s t a l l e d    t o    f u l fi   l    t h e   
requirements  of  particular  driving 
conditions:  
   -   a rear fog lamp to be seen from a  distance, 
  -   front  fog  lamps  for  even  better  visibility, 
  -   daytime  lights  to  be  seen  during  the day.      Programming  
 Various  automatic  lighting  control  
modes  are  also  available  according 
to the following options:  
   -   guide-me-home lighting, 
  -   automatic lighting, 
  -   directional lighting.    
  Manual controls 
 lights off,   
     automatic  switching  on  of  
the lights,  
 side lights only, 
 dipped  headlamps  or  
main beam headlamps. 
  
B.    lever for inversion of the lights by 
pulling:  dipped  headlamps/main 
beam headlamps. 
 In  the  lights  off  and  side  lights 
modes,  the  driver  can  switch  on 
the  main  beam  headlamps  directly 
 ( " h e a d l a m p   fl   a s h " )   f o r   a s   l o n g   a s   h e  
pulls the lever.  
  Displays  
 Lighting  of  the  corresponding  indi- 
cator  light  on  the  instrument  panel 
 c o n fi   r m s    t h e    s e l e c t i v e    s w i t c h i n g    o n  
of the lighting selected.  
 The  lighting  commands  are  issued 
directly  by  the  driver  by  means  of 
the ring  
A  and the lever   B .    
A.    main  lighting  mode  selection 
ring, with:    
Page 70 of 306

84 
V I S I B I L I T Y
5
        
C.    fog lamps selection ring. 
 The fog lamps operate with the side  
lights and the dipped and main beam 
headlamps.  
   -   1  st turn forwards: lighting of rear  foglamps. 
  -   1  st  turn  rearwards:  extinction  of  rear foglamps.       -   1 st  turn forwards: lighting of front 
foglamps. 
  -   2 nd  turn forwards: lighting of rear  foglamps. 
  -   1 st   turn  rearwards:  extinction  of  rear foglamps. 
  -   2 nd  turn rearwards: extinction of  front foglamps.   
  Model with rear foglamps  
only 
  Model with front and rear 
foglamps       In good or rainy weather, both day  
and  night,  the  front  fog  lamps  and 
the  rear  fog  lamps  are  prohibited. 
In  these  situations,  the  power  of 
their beams may dazzle other driv-
ers.  They  should  only  be  used  in 
fog or snow.  
 In  these  weather  conditions,  it  is  
your responsibility to switch on the 
fog  lamps  and  dipped  headlamps 
manually as the brightness sensor 
 m a y   d e t e c t   s u f fi   c i e n t   l i g h t .   
 Do not forget to switch off the front  
fog  lamps  and  the  rear  fog  lamps 
when  they  are  no  longer  neces-
sary.   
  Lights on buzzer  
 The  triggering  of  an  audible  signal  
when a front door is opened warns 
the  driver  that  he  has  forgotten  to 
switch  off  his  vehicle's  lights,  with 
the ignition off and in manual lights 
mode.  
 In this case, switching off the lights  
stops the audible signal.  
 With  the  ignition  off,  if  the  dipped  
headlamps  remain  on,  they  will 
switch  off  automatically  after  thirty 
minutes  to  prevent  discharging  of 
the battery.      
Page 71 of 306

85 
V I S I B I L I T Y
5
  *   According to country.  
  Daytime-running lamps  
 System  which  switches  on  special  
lights at the front, to make the vehi-
cle more visible by day.  
 They light up automatically and per- 
manently,  when  the  engine  is  run-
ning, if:  
   -   The  function  is  activated *   in  the 
"Main  Menu"  of  the  instrument  
panel screen. 
  -   The lighting control is at position   0  
or   AUTO  . 
  -   All the headlamps are off.   
 You  can  deactivate *   this  function  
using the "Main Menu" of the instru-
ment panel screen.     Manual guide-me-home  
lighting  
 The  temporary  maintaining  of  the  
dipped  headlamps  lighting  after  the 
vehicle's ignition has been switched 
off  makes  the  driver's  exit  easier 
when the light is poor.  
  Switching on  
   
        W i t h    t h e    i g n i t i o n    o f f ,    " fl   a s h "    t h e  
headlamps using the lever   B . 
  
        A    s e c o n d    " h e a d l a m p    fl   a s h "  
switches the function off again.   
  Switching off 
 The manual guide-me-home lighting  
switches off automatically after a set 
time.     Automatic lighting  
 The  side  lights  and  dipped  head- 
lamps are switched on automatically, 
without  any  action  on  the  part  of  the 
driver,  when  a  low  level  of  external 
light is detected or in certain cases of 
activation of the windscreen wipers.  
 As  soon  as  the  brightness  returns  
 t o   a   s u f fi   c i e n t   l e v e l   o r   a f t e r   t h e   w i n d -
screen  wipers  are  switched  off,  the 
lights are switched off automatically.  
  Activation  
   
     Turn  ring    A   to  the    "AUTO"    po-
sition.  The  automatic  lighting  is 
accompanied  by  a  message  on 
the multifunction display.   
  Deactivation  
   
     Turn  ring    A   to  a  position  other 
than    "AUTO"  .  Deactivation  is 
accompanied  by  a  message  on  
the multifunction display.      
Page 72 of 306

85 
V I S I B I L I T Y
5
  *   According to country.  
  Daytime-running lamps  
 System  which  switches  on  special  
lights at the front, to make the vehi-
cle more visible by day.  
 They light up automatically and per- 
manently,  when  the  engine  is  run-
ning, if:  
   -   The  function  is  activated *   in  the 
"Main  Menu"  of  the  instrument  
panel screen. 
  -   The lighting control is at position   0  
or   AUTO  . 
  -   All the headlamps are off.   
 You  can  deactivate *   this  function  
using the "Main Menu" of the instru-
ment panel screen.     Manual guide-me-home  
lighting  
 The  temporary  maintaining  of  the  
dipped  headlamps  lighting  after  the 
vehicle's ignition has been switched 
off  makes  the  driver's  exit  easier 
when the light is poor.  
  Switching on  
   
        W i t h    t h e    i g n i t i o n    o f f ,    " fl   a s h "    t h e  
headlamps using the lever   B . 
  
        A    s e c o n d    " h e a d l a m p    fl   a s h "  
switches the function off again.   
  Switching off 
 The manual guide-me-home lighting  
switches off automatically after a set 
time.     Automatic lighting  
 The  side  lights  and  dipped  head- 
lamps are switched on automatically, 
without  any  action  on  the  part  of  the 
driver,  when  a  low  level  of  external 
light is detected or in certain cases of 
activation of the windscreen wipers.  
 As  soon  as  the  brightness  returns  
 t o   a   s u f fi   c i e n t   l e v e l   o r   a f t e r   t h e   w i n d -
screen  wipers  are  switched  off,  the 
lights are switched off automatically.  
  Activation  
   
     Turn  ring    A   to  the    "AUTO"    po-
sition.  The  automatic  lighting  is 
accompanied  by  a  message  on 
the multifunction display.   
  Deactivation  
   
     Turn  ring    A   to  a  position  other 
than    "AUTO"  .  Deactivation  is 
accompanied  by  a  message  on  
the multifunction display.      
Page 73 of 306

86 
V I S I B I L I T Y
5
  Linked with the automatic  
"Guide-me-home" lighting  
 Link  with  the  automatic  lighting  pro- 
vides  the  "guide-me-home"  lighting 
with the following additional options:  
   -   selection of the duration of main-taining of the lighting for 15, 30 or  
60  seconds  in  the  vehicle  para-
meters on the multifunction display 
 c o n fi   g u r a t i o n   m e n u ,  
  -   automatic activation of "guide-me- home"  lighting  when  automatic 
lighting is in operation.   
  Operating fault  
 In  the  event  of  a  malfunction  of  the  
brightness  sensor,  the  lights  come 
on  and  a  message  appears  on  the 
multifunction  display,  accompanied 
by an audible signal.  
 Consult a CITROËN dealer.   In  fog  or  snow,  the  brightness  
 s e n s o r    m a y    d e t e c t    s u f fi   c i e n t    l i g h t .  
Therefore,  the  lights  will  not  come 
on automatically.  
 Do not cover the brightness sensor, 
linked  with  the  rain  sensor  and 
located  in  the  centre  of  the  wind-
screen  behind  the  interior  mirror; 
the  associated  functions  would  no 
longer be controlled.         MANUAL ADJUSTMENT OF THE HEADLAMPS 
 To  avoid  dazzling  other  road  users,  
the height of the halogen bulb head-
lamps  must  be  adjusted  according 
to the load in the vehicle.  
  
0.
  1 or 2 people in the front seats. 
  
-.
  3 people. 
  
1.
  5 people. 
  
-.
  Intermediate setting. 
  
2.
  5 people + maximum authorised  
loads. 
  
-.
  Intermediate setting. 
  
3.   Driver  +  maximum  authorised 
loads. 
  Initial setting is position  "0".  
         AUTOMATIC ADJUSTMENT OF THE DIRECTIONAL HEADLAMPS 
 Do not touch the xenon headlamps.  
Consult a CITROËN dealer.    If  a  malfunction  oc-
curs,  this  warning 
light  is  displayed  on 
the  instrument  panel, 
accompanied  by  an 
audible  signal  and  a 
message on the multi-
function display.
  The  system  then  places  your  head-
lamps in the lowest position. 
 In order to avoid causing a nuisance 
to other road users, this system cor-
rects  the  height  of  the  xenon  head-
lamps beam automatically and when 
stationary,  in  relation  to  the  load  in 
the vehicle.    
Page 74 of 306

87 
V I S I B I L I T Y
5
     DIRECTIONAL LIGHTING 
  
without bend lighting   
  
with bend lighting    
  "Bend lighting" function  
 With  dipped  or  main  beams,  this  
function  provides  additional  lighting 
for  the  inside  of  a  bend,  when  the 
vehicle speed is below 25 mph (ap-
 p r o x   4 0   k m / h ) .   
 This  lighting  is  most  useful  when  
travelling  at  low  and  medium  speed 
(urban  driving,  winding  road,  inter-
 s e c t i o n s ,   p a r k i n g   m a n o e u v r e s . . . ) .   
  Activation  
 This function is activated:  
   -   when  the  direction  indicator  is 
activated, 
  -   from a certain angle of rotation of  the steering wheel.     Deactivation  
 This function is deactivated:  
   -   below a certain angle of rotation 
of the steering wheel, 
  -   when  stationary  or  at  very  low  speed, 
  -   when reverse gear is engaged, 
  -   when  the  directional  headlamps  are switched off.       
Page 75 of 306

88 
V I S I B I L I T Y
5
  Programming  
 The function is activated or deactivat- 
ed  via  the  instrument  panel  display 
"Main Menu".  
 To  do  this,  select  "Vehicle  parame- 
ters\Lighting\Directional headlamps".   
  Operating fault  If  a  malfunction  occurs,  this  
 w a r n i n g    l i g h t    fl   a s h e s    o n    t h e  
instrument panel, accompa-
nied  by  a  message  on  the 
multifunction display. 
 Consult a CITROËN dealer. 
 When stationary or moving at very  
low speed or when reverse gear is 
engaged, the function is inactive.  
 The  status  of  the  function  remains  
in the memory when the ignition is 
switched off.  
  Directional headlamps  
function  
 When  the  dipped  or  main  beam  
headlamps  are  on,  this  function, 
associated  with  the  "bend  lighting" 
function,  enables  the  light  beam  to 
follow the direction of the road.  
 The  use  of  this  function,  linked  with  
the  xenon  headlamps  only,  consid-
erably  improves  the  quality  of  your 
lighting when cornering. 
  
without   
 directional lighting   
  
with   
 directional lighting      
Page 77 of 306

90 
V I S I B I L I T Y
5
  Reverse gear  
 When  reverse  gear  is  engaged,  the  
rear  wiper  will  come  into  operation  if 
the windscreen wipers are operating.   
  Programming  
 The function is activated or deactivat- 
ed  via  the  instrument  panel  display 
 c o n fi   g u r a t i o n   m e n u .   
 This function is activated by default.   
  Windscreen and headlamp  
wash  
   
     Pull  the  windscreen  wiper  stalk 
towards  you.  The  windscreen  
wash then the windscreen wipers 
 o p e r a t e   f o r   a   fi   x e d   p e r i o d .    
  
If  the  dipped  headlamps  are  on  , 
the  headlamp  washers  operate  at 
the same time.     Automatic windscreen wiping  
 The windscreen wipers operate auto- 
matically,  without  any  action  on  the 
part  of  the  driver,  if  rain  is  detected 
 ( s e n s o r    b e h i n d    t h e    i n t e r i o r    m i r r o r ) ,  
adapting their speed to the intensity 
of the rainfall.  
  Activation  
 This  is  controlled  manually  by  the  
driver  by  pushing  lever   
A   to  the 
 
"AUTO"   position. 
 It is accompanied by a message on 
the instrument panel display.     Switching off  
 This  is  controlled  manually  by  the  
driver  by  moving  lever   
A   upwards 
and returning it to position   "0" . 
 It is accompanied by a message on 
the instrument panel display.  
 The automatic wiping must be reac- 
tivated if the ignition has been off for 
more  than  one  minute,  by  pushing 
lever   A  downwards.  
  Operating fault  
 If  an  automatic  wiping  malfunction  
occurs, the wipers will operate in in-
termittent mode.  
 Have  it  checked  by  a  CITROËN  
dealer. 
 Do not cover the rain sensor, linked 
with  the  brightness  sensor  and 
located  in  the  centre  of  the  wind-
screen behind the interior mirror.  
 Switch  off  the  automatic  wiping  
when using an automatic car wash.  
 In winter, it is advisable to wait until  
the windscreen is completely clear 
of  ice  before  activating  the  auto-
matic wiping.    
Page 78 of 306

90 
V I S I B I L I T Y
5
  Reverse gear  
 When  reverse  gear  is  engaged,  the  
rear  wiper  will  come  into  operation  if 
the windscreen wipers are operating.   
  Programming  
 The function is activated or deactivat- 
ed  via  the  instrument  panel  display 
 c o n fi   g u r a t i o n   m e n u .   
 This function is activated by default.   
  Windscreen and headlamp  
wash  
   
     Pull  the  windscreen  wiper  stalk 
towards  you.  The  windscreen  
wash then the windscreen wipers 
 o p e r a t e   f o r   a   fi   x e d   p e r i o d .    
  
If  the  dipped  headlamps  are  on  , 
the  headlamp  washers  operate  at 
the same time.     Automatic windscreen wiping  
 The windscreen wipers operate auto- 
matically,  without  any  action  on  the 
part  of  the  driver,  if  rain  is  detected 
 ( s e n s o r    b e h i n d    t h e    i n t e r i o r    m i r r o r ) ,  
adapting their speed to the intensity 
of the rainfall.  
  Activation  
 This  is  controlled  manually  by  the  
driver  by  pushing  lever   
A   to  the 
 
"AUTO"   position. 
 It is accompanied by a message on 
the instrument panel display.     Switching off  
 This  is  controlled  manually  by  the  
driver  by  moving  lever   
A   upwards 
and returning it to position   "0" . 
 It is accompanied by a message on 
the instrument panel display.  
 The automatic wiping must be reac- 
tivated if the ignition has been off for 
more  than  one  minute,  by  pushing 
lever   A  downwards.  
  Operating fault  
 If  an  automatic  wiping  malfunction  
occurs, the wipers will operate in in-
termittent mode.  
 Have  it  checked  by  a  CITROËN  
dealer. 
 Do not cover the rain sensor, linked 
with  the  brightness  sensor  and 
located  in  the  centre  of  the  wind-
screen behind the interior mirror.  
 Switch  off  the  automatic  wiping  
when using an automatic car wash.  
 In winter, it is advisable to wait until  
the windscreen is completely clear 
of  ice  before  activating  the  auto-
matic wiping.