set clock Citroen C5 DAG 2008.5 (RD/TD) / 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008.5, Model line: C5 DAG, Model: Citroen C5 DAG 2008.5 (RD/TD) / 2.GPages: 306, PDF Size: 18.85 MB
Page 27 of 306

45 
3
C O M F O R T
                       AUTOMATIC AIR CONDITIONING (MONO ZONE) 
 This  is  the  normal  sys- 
tem  operating  mode. 
In  accordance  with  the 
level  of  comfort  cho-
sen,  pressing  this  con-
 t r o l ,    c o n fi   r m e d    b y    t h e  
switching  on  of  indicator  light    A ,  per-
mits automatic and simultaneous con-
trol of all of the following functions:  
       -      A i r   fl   o w .  
  -   Temperature  in  the  passenger  compartment. 
  -   Air distribution. 
  -   Air intake. 
  -   Air conditioning.  
  1. Automatic operation  
 It  is  advisable  to  leave  all  of  the  
vents open.  
 Simply  pressing  one  of  the  con- 
trols,  with  the  exception  of  control 
 
2  ,  switches  the  system  to  manual 
mode.  
 Indicator light   A  switches off.     2. Temperature adjustment 
 Turn control  2  to change 
the temperature: 
   -    Clockwise  to  in- crease the temper- 
ature. 
  -   Anticlockwise to reduce the tem- perature.  
 The setting required is displayed.  
 The  value  indicated  on  the  display  
corresponds  to  a  level  of  comfort 
and not to a temperature in degrees 
Celsius or Fahrenheit, depending on 
 t h e   c h o i c e   o f   c o n fi   g u r a t i o n   v a l i d a t e d  
on the display.  
 A  setting  around  the    value  21   usually 
makes  it  possible  to  obtain  optimum  
comfort.  However,  depending  on  your 
requirements,  a  setting  between  18 
and 24 is usual.  
 On  entering  the  vehicle,  the  interior  
temperature  may  be  much  colder 
(or  warmer)  than  is  comfortable. 
There is no need to change the tem-
perature displayed in order to obtain 
rapidly the level of comfort required.  
 The  automatic  regulation  of  the  air  
conditioning  will  use  its  maximum 
performance  settings  to  correct  the 
temperature difference as quickly as 
possible.  
  
Mono zone:   this is the overall regu-
lation  of  the  temperature,  distribu-
 t i o n   a n d   fl   o w   o f   a i r   i n   t h e   p a s s e n g e r  
compartment.  
 The symbols and messages associat- 
ed with the automatic air conditioning 
controls  appear  on  the  multifunction 
display.  
   
1.    Automatic operation 
  
2.    Temperature adjustment 
  
3.    Air distribution adjustment 
  
4.    Activation/deactivation  of  the  air 
conditioning 
  
5.       A i r   fl   o w   a d j u s t m e n t  
  
6.    Front demisting - de-icing 
  
7.    Rear demisting - de-icing 
  
8.    Air  recirculation  -  intake  of  exte-
rior air 
  
9.    Display