reset CITROEN C6 2005 Owners Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2005, Model line: C6, Model: CITROEN C6 2005Pages: 223, PDF Size: 4.26 MB
Page 118 of 223
Downloaded from www.Manualslib.com manuals search engine 112
CLUTCH
GEARBOX
TRANSMISSION
PROCEDURE FOR INITIALISATION OF THE AUTOMATIC GEARBOX ECU
NOTE:For all these operations, follow the procedure in the diagnostic tool.
Replacement of the automatic gearbox without replacement of the ECU.
Carry out the following operations:
- Initialisation of the neutral position of the gear selection lever position sensor.
- Initialisation of the adaptation of the oil pressure regulators and electrovalves.
- Initialisation of the autoadaptatives.
- Resetting the oil usage counter to zero.
Replacement of the automatic gearbox ECU.
Carry out the following operations:
- Read the value of the gearbox oil usage counter from the old ECU.
- Write the value of the oil usage counter into the new ECU.
- Initialisation of the neutral position of the gear selection lever position sensor.
- Initialisation of the adaptation of the oil pressure regulators and electrovalves.
- Initialisation of the autoadaptatives.
Angl-C6-page101-120-2005 4/02/05 17:25 Page 112
Page 119 of 223
Downloaded from www.Manualslib.com manuals search engine 113
CLUTCH
GEARBOX
TRANSMISSION
PROCEDURE FOR INITIALISATION OF THE AUTOMATIC GEARBOX ECU
Replacement of the automatic gearbox and of the automatic gearbox ECU.
Carry out the following operations:
- Initialisation of the autoadaptatives.
- Resetting the oil usage counter to zero.
- Initialisation of the adaptation of the oil pressure regulators and electrovalves.
Draining of the automatic gearbox oil.
Carry out the following operations:
- Initialisation of the adaptation of the oil pressure regulators and electrovalves.
- Resetting the oil usage counter to zero.
NOTE:If downloading the automatic gearbox ECU, there is no specific operation, follow the procedure in the diagnostic tool.
IMPERATIVE: For a certain time, having carried out an ECU initialisation procedure, one may obtain gear changing quality that is more
or less good (adaptation of the ECU parameters to the gearbox). To improve the quality, it is necessary to perform a road test with
frequent changing through the gears (auto-adaptive laws).
Angl-C6-page101-120-2005 4/02/05 17:25 Page 113