ignition Citroen DS3 2014 1.G User Guide

33
DS3_en_Chap01_controle-de-marche_ed01-2014
Warning lampis oncau seAction / Observations
AdBlue
® additive
(BlueH
d i d iesel) fixed,
  on   switching o
n   the   ignition, a

ccompanied   by   an
 a

udible   signal   and   a
 m

essage   indicating   the
 r

emaining
 d
riving
 r
ange.The
  remaining   driving   range   is  b
etween   350   miles   (600   km)   and  
1

500   miles   (2400   km).Have the
adbl ue® additive tank topped up as soon a
s
 
possible:
 
go
 
to
  a   dealer   CITROËN   or   a   qualified  
w

orkshop,
 
or
 
carry   out   this   operation   yourself   by  
r

eferring
 
to
 
the
 
corresponding   section.
+ flashing
 
associated
 
with
 t

he
 
SERVICE
 
warning
 l

amp,
 
accompanied
 
by
 a

n
 
audible
 
signal
 
and
 
a
 m

essage
 
indicating
 
the
 r

emaining
 d

riving
 r

ange. The
 
remaining
 
driving
 
range
 
is
 
b

etween
 
0
 
and
 
375
 
miles
 
(600
 
km). You
 
must
 
top-up the a d
blu
e
® additive tank to avoid
a
breakdown :
 
go
 
to
 
a
 
dealer
 
CITROËN   or   a   qualified  
w

orkshop,
 
or
 
carry
 
out
 
this
 
operation   yourself   by  
r

eferring
 
to
 
the
 
corresponding
  section.
flashing,
 as

sociated
 w

ith the SERVICE
warning
 lam

p,
 a

ccompanied
 
by
 
an
 a

udible
 
signal
 
and
 
a
 m

essage
 
indicating
 
that
 s

tarting
 
is
 
prevented. The
a
d
blu

e
® tank is empty: the s
tarting
 
inhibition   system   required  
b

y
 
legislation   prevents   starting   of   the  
e

ngine. To
  be   able   to   start   the   engine,   you   must   top-up the a
dblu e® additive tank: go to a dealer CITROËN or a q
ualified   workshop,   or   carry   out   this   operation   yourself  
b

y
 
referring   to   the   corresponding   section.
It is essential
 

to   add   at   least   3.8   litres   of   AdBlue
® to
the
 
tank.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2014
Warning lampis oncau seAction / Observations
+
+ S
cR e

missions
control system
(BlueH
d i d iesel)fixed,
  on   switching   on   the
 i

gnition,   associated   with
 t

he   SERVICE   and   engine
 d

iagnostic
 w
arning
 lam
ps,
 a

ccompanied   by   an   audible
 s

ignal   and   a   message   indicating
 a

n   emissions   control   fault.A
  fault   with   the   SCR   emissions  
c

ontrol   system   has   been   detected.This
  alert   disappears   once   the   exhaust  
e

missions   return   to   normal   levels.
flashing,
  on   switching   on  
t

he   ignition,   associated   with  
t

he   SERVICE   and   engine  
d

iagnostic   warning   lamps,  
a

ccompanied   by   an   audible  
s

ignal   and   a   message  
i

ndicating
 t
he
 r
emaining
 d

riving
 r
ange.The
  remaining   driving   range   is  
b

etween   0   and   650   miles   (1   100   km).Contact a CITR
oË

N dealer or a qualified
workshop
  without delay, to avoid a
breakdown .
flashing,
  on   switching   on  
t

he   ignition,   associated   with  
t

he   SERVICE   and   engine  
d

iagnostic   warning   lamps,  
a

ccompanied   by   an   audible  
s

ignal   and   a   message  
i

ndicating   that   starting   is  
p

revented. You
  have   exceeded   the   authorised  
d

riving   limit:   the   starting   inhibition  
s

ystem   prevents   starting   of   the  
e

ngine.To
  be   able   to   start   the   engine,   you   must
call on a CITR
oË

N dealer or a qualified
workshop.

DS3_en_Chap01_controle-de-marche_ed01-2014
System which informs the driver when the next   service   is   due,   in   accordance   with   the  
ma

nufacturer's
 ser
vicing
 s
chedule.
Service indicator
Between 600 miles (1 000 km)
and 1 800 miles (3 000 km) remain
before the next service is due
For 5 seconds after the ignition is switched on, the   spanner   symbolising   the   service   operations  
c

omes   on.   The   distance   recorder   display   line  
i

ndicates   the   distance   remaining   before   the  
n

ext   service   is   due.
Example:
 

1   700   miles   (2   800   km)   remain  
b

efore   the   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he spanner goes off ;
  the   distance   recorder  
r

esumes   its   normal   operation.   The   screen   then  
i

ndicates   the   total   distance.
For
b
l

ue HDi Diesel versions, the
degree
 
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
i

s
 
also
 
taken
 
into
 
account
 
(depending
 
o

n
 
the
 
country
 
of
 
sale).
The
 
point
 
at
 
which
 
the
 
next
 
service
 
is
 
due
 
is
 
c

alculated
 
from
 
the
 
last
 
indicator
 
zero
 
reset,
 
d

epending
 
on
 
the
 
distance
 
travelled
 
and
 
the
 
t

ime
 
elapsed
 
since
 
the
 
last
 
service.
More than 1 800 miles (3 000 km)
remain before the next service is
due
When the ignition is switched on, no service i nformation   appears   in   the   screen.

37
DS3_en_Chap01_controle-de-marche_ed01-2014
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560   miles   (900   km)   remain   before  t
he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on to
indicate
  that   a   service   must   be   carried   out  
s

oon. 5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on.
Service overdue
For 5 seconds after the ignition is switched on, t
he spanner flashes to indicate that the service
must
  be   carried   out   as   soon   as   possible.
Example:
 

the   service   is   overdue   by   180   miles  
(

300   km).
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates: For
bl ueHDi Diesel versions, this alert
may   also   be   accompanied   by   the   fixed  
i

llumination   of   the   service   warning   lamp  
w

hen   the   ignition   is   on.
The
  distance   remaining   may   be  
w

eighted   by   the   time   factor,   depending  
o

n   the   driving   conditions.
Therefore,
  the   spanner   may   also   come  
o

n   if   you   have   exceeded   the   period  
s

ince the last service, indicated in the
maintenance
 an

d
 w
arranty
 g
uide.
For
b
l
ueHDi Diesel versions, the
spanner
  may   also   be   brought   on   earlier  
t

han   expected,   depending   on   the  
d

egree   of   deterioration   of   the   engine   oil  
(

depending   on   the   country   of   sale).
The
  rate   of   deterioration   of   the   engine  
o

il   depends   on   the   driving   conditions   in  
w

hich   the   vehicle   is   used.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2014
Service indicator zero reset
After each service, the service indicator must be   reset   to   zero.
The
  procedure   for   resetting   to   zero   is   as  
f

ollows:
F
 
s
witch   off   the   ignition,
F

p
ress and hold the trip distance recorder
zero reset button,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F

w
hen the display indicates "=0" , release
the
  button;   the   spanner   disappears. Following
  this   operation,   if   you   wish   to  
d

isconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   taken   into   account.
Retrieving the service
information
You can access the service information at any t
ime.
F

P
ress the trip distance recorder zero reset
button.
 T

he   service   information   is   displayed   for   a  
f

ew   seconds,   then   disappears.

39
DS3_en_Chap01_controle-de-marche_ed01-2014
on vehicles fitted with an electric oil level
indicator,  information   on   the   oil   level   is  
d

isplayed   in   the   instrument   panel   for   a   few  
s

econds   when   the   ignition   is   switched   on,   after  
t

he   service   information.
Engine oil level indicator*
The level shown will only be correct
if  the   vehicle   is   on   level   ground   and  
t

he   engine   has   been   off   for   more   than  
3

0 minutes.
Oil level correct
Oil level low
This is indicated by the flashing of " O I L" ,
a ccompanied   by   illumination   of   the   service  
w

arning   lamp,   an   audible   signal   and   a  
m

essage.
If
  the   low   oil   level   is   confirmed   by   a   check   using  
t

he   dipstick,   the   level   must   be   topped   up   to  
p

revent   damage   to   the   engine.
Refer
  to   the   "Checking   levels"   section.
Oil level indicator fault
This is signaled by the flashing of "OIL- -".
C ontact a CITRoË N dealer or a qualified
workshop.
In the event of a fault with the electric oil level
indicator,
  the   engine   oil   level   is   no   longer  
mon

itored.
While
  the   system   is   faulty,   you   should   check  
t

he   engine   oil   level   using   the   manual   dipstick  
l

ocated   under   the   bonnet.
Refer
  to   the   "Checking   levels"   section.
*
  Depending   on   version.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2014
The total and trip distances are displayed for
thirty  seconds   when   the   ignition   is   switched   off,  
w

hen the driver's door is opened and when the
vehicle
  is   locked   or   unlocked.
distance recorders
Total distance recorder
It measures the total distance travelled by the vehicle   since   its   first   registration.
When
 
traveling
 
abroad,
 
you
 
may
 
h

ave
 
to
 
change
 
the
 
units
 
of
 
distance:
 
t

he
 
display
 
of
 
road
 
speed
 
must
 
be
 
in
 
t

he
 
official
 
units
 
(miles
 
or
 
km)
 
for
 
the
 
c

ountry.
 
The
 
change
 
of
 
units
 
is
 
done
 v
ia
 
the
 
screen
 
configuration
 
menu,
 
with
 t
he
 
vehicle
 
stationary.
Trip distance recorder
It measures the distance travelled since it was r
eset   to   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   the   button   until  
z

eros   appear.

DS3_en_Chap01_controle-de-marche_ed01-2014
A few definitions…
Range
(miles or km)
current fuel consumption
(mpg or l/100 km or km/l)
Stop & Start time
counter
(minutes / seconds or hours / minutes)
This
 
value
 
may
 
vary
 
following
 
a
 
change
 
i

n
 
the
 
style
 
of
 
driving
 
or
 
the
 
relief,
 
r

esulting
 
in
 
a
 
significant
 
change
 
in
 
the
 
c

urrent
 
fuel
 
consumption.
If dashes are displayed continuously
while
 
driving
 
in
 
place
 
of
 
the
 
digits,
 
c

ontact a CITR
oË

N dealer or a
qualified
 w

orkshop.
When
 
the
 
range
 
falls
 
below
 
20
 
miles
 
(30
 
km),
 
d

ashes
 
are
 
displayed.
 
After
 
filling
 
with
 
at
 
least
 
5

 
litres
 
of
 
fuel,
 
the
 
range
 
is
 
recalculated
 
and
 
is
 
d

isplayed
 
when
 
it
 
exceeds
 
60
 
miles
 
(100
 
km).
distance remaining to
destination
(miles or km)
T
his indicates the distance which can still be
travelled
 
with
 
the
 
fuel
 
remaining
 
in
 
the
 
tank
 
in
 
r

elation
 
to
 
the
 
average
 
fuel
 
consumption
 
over
 
t

he
 
last
 
few
 
miles
 
(kilometres)
 
travelled. This
 
is
 
the
 
average
 
fuel
 
consumption
 
during
 
the
 
l

ast
 
few
 
seconds.
This
 
is
 
the   distance   remaining   to   be   travelled  
t

o
 
the
 
final   destination.   It   can   be   entered   by  
t

he user.
If the distance is not entered, dashes are
displayed
  in   place   of   the   digits.
If
 
your
 
vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter
 
calculates   the   time   spent   in   STOP  
m

ode
 
during   a   journey.  
I

t
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on   with   the   key.
distance travelled
(miles or km)
T
his indicates the distance travelled since the
last
 
trip
 
computer   zero   reset.
Average speed
(mph or km/h)
T
his
 
is
 
the   average   speed   calculated   since   the  
l

ast
 
trip
 
computer   zero   reset   (ignition   on).
Average fuel
consumption
(mpg or l/100 km or km/l)
T
his
 
is
 
the
 
average   fuel   consumption   since   the  
l

ast
 
trip
 
computer   zero   reset.
This
 
function   is   only   displayed   from  
20
 
mph
  (30   km/h).

DS3_en_Chap03_ouvertures_ed01-2014
This is indicated by lighting of the courtesy lamps   and   flashing   of   the   direction   indicators  
f

or   a   few   seconds.
Locating your vehicle
F Press   the   closed   padlock   to  l
ocate   your   locked   vehicle   in   a  
c

ar
 par
k.
Anti-theft protection
Electronic engine immobiliser
The key contains an electronic chip which has a  special   code.   When   the   ignition   is   switched  
o

n,   this   code   must   be   recognised   in   order   for  
s

tarting   to   be   possible.
This
  electronic   engine   immobiliser   locks   the  
e

ngine   management   system   a   few   minutes  
a

fter   the   ignition   is   switched   off   and   prevents  
s

tarting   of   the   engine   by   anyone   who   does   not  
h

ave   the   key.In the event of a fault, you are
informed
  by   illumination   of   this  
w

arning   lamp,   an   audible   signal   and   a   message  
i

n   the   screen.
In
  this   case,   your   vehicle   will   not   start;   contact  
a

  CITROËN   dealer   as   soon   as   possible.-
 
P
osition   1:   Stop
-
 
P
osition   2:   Ignition
-
 
P
osition   3:   Starting
Ignition switch
keep safely the label attached to
the keys  given   to   you   on   acquisition   of  
t

he   vehicle.

63
DS3_en_Chap03_ouvertures_ed01-2014
Starting the vehicle
F Insert  the   key   in   the   ignition   switch. T
he   system   recognises   the   starting   code.
F
 
T
urn   the   key   fully   towards   the   dashboard   to  
p

osition 3 (Starting) .
F
 
W
hen   the   engine   starts,   release   the   key.F
 I mmobilise   the   vehicle.
F  T urn   the   key   fully   towards   you   to  
position 1 (Stop) .
F
 
R
emove   the   key   from   the   ignition   switch.
Switching the vehicle off
Do not attach any heavy objects to the   key   as   this   could   weigh   down   on   it  
w

hen   in   the   ignition   switch   and   cause  
a

  fault.
Key reminder
If the key is left in the ignition switch, an audible   signal   sounds   when   the   driver's  
d

oor   is   opened.
Access