display CITROEN DS3 CABRIO DAG 2016 Handbook (in English)

DS3_en_Chap01_controle-de-marche_ed01-2015
Languages
Once the "Languages" menu has been selected, you   can   change   the   language   used   by   the s

creen   by   choosing   one   from   a   defined   list.
Units
Once the "Units" menu has been selected, you   can   change   the   units   of   the   following  
par

ameters:
-
 
t
emperature   (°C   or   °F),
-
 
f
uel   consumption   (l/100   km,   mpg   or   km/l).
Once
  the   fuel   consumption   units   have  
b

een   set   to   mpg,   the   information   in   the  
i

nstrument   panel   screen   on   speed   and  
d

istance   will   also   be   in   mph   and   miles.
As
  a   safety   measure,   configuration   by  
t

he   driver   of   the   multifunction   screen  
s

hould   only   be   done   when   stationary.
display settings
Once the "Display settings" menu has been selected, you   can   gain   access   to   the   following   settings:
- year,
-  m onth,
-


d ay,
-


h o u r,
-
 m

inutes,
-
 
1
2   or   24   hour   mode.
F
 
O
nce   you   have   selected   a   setting,   press  
t

he "7" or " 8"
  buttons   to   change   its   value.
F

P
ress the " 5" or " 6" buttons to switch
respectively
  to   the   previous   or   next   setting.
F

P
ress the "OK"
 
button   to   save   the   change  
a

nd   return   to   the   normal   display   or   press  
t

he "Back"
 
button   to   cancel. Setting the date and time
F

P
ress the ME
n
U
 
button.
F
 
S
elect   "Display   settings"   using   the   "5 "
or
"6 "
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
S
elect   the   "Year"   function   using   the   "5 "
or
"6 "
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
C
hoose   the   desired   value,   using   the   "7 "
or
"8 "
  button.
F
Press "OK"
 

to   confirm   the   selection.
F

R
epeat the procedure to set the "Month",
"Day",
  "Hours",   and   "Minutes".

45
DS3_en_Chap01_controle-de-marche_ed01-2015
Monochrome screen C
This displays the following information:
-  t ime,
-


date,
-
 
a
mbient   temperature   (this   flashes   if   there   is  
a

  risk   of   ice),
-

s
tatus of doors and boot,
-
 
a
udio   sources   (radio,   CD,   USB   port   /  
a

uxiliary   socket   etc.),
-
 
t
rip   computer,
-
 
i
nformation   or   alert   messages,
-
 
s
ettings   menus   for   the   screen   and   vehicle  
s

ystems.
displays in the screen
From your Audio system control panel, you can:
F p ress the "MEn U"  button   to   gain   access   to  
t

he main menu ,
F

p
ress the " 5" or " 6" buttons to scroll
through
  the   items   in   the   screen,
F

p
ress the "MO
dE" 
button   to   change   the  
p

ermanent   application   (trip   computer,  
a

udio
 s
ource...),
F

p
ress the " 7" or " 8"
  buttons   to   change   a  
s

etting   value,
F

p
ress the "OK"
 
button   to   confirm,
or
F

p
ress the "Back" button to abandon the
operation
  in   progress.
Controls
F Press the "MEn U"  button   to   gain   access  t
o the main menu :
-
a

udio functions,
-
 
t
he   trip   computer,
-
 pe

rsonalisation-configuration,
-
 
t
elephone   (hands-free   kit).
F

P
ress the " 5" or " 6" buttons to select the
menu
  required,   then   confirm   by   pressing  
t

he "OK"
 
button.
Main menu
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2015
With the Audio system switched on, once this menu   has   been   selected   you   can   activate   or  
d

eactivate the functions associated with use
of
  the   radio   (RDS,   REG,   RadioText),   the   CD  
(

introscan,   shuffle,   CD   repeat)   or   the   MP3  
p

layer   (USB   port   /   auxiliary   socket).
For
  more   information   on   the   "Audio   functions"  
a

pplication  
,
 
r
efer  
t
o  
t
he  
"
Audio  
s
ystem"  
s
ection.
"Audio functions"
menu"Trip computer" menu
Once this menu has been selected, you can c
onsult   information   concerning   the   status   of   the  
v

ehicle   (warnings   log,   status   of   functions,   etc.)
Alert log
This summarises the active warning messages, displaying   them   in   succession   in   the  
m

ultifunction
 s
creen.
Status of functions
This summarises the status (active or inactive) of   the   vehicle's   functions.
Enter distance to destination
This allows you to enter an approximate distance   until   your   final   destination. F

P
ress the "ME
n
U"
 
button   to   gain   access  
t

o   the   general   menu.
F
P
ress the arrows, then the "OK"
button to
select the " Trip computer "   menu.
F
I
n the "
Trip computer "   menu,   select   one  
o

f   the   following   applications:

DS3_en_Chap01_controle-de-marche_ed01-2015
Display configuration
Once this menu has been selected, you can gain   access   to   the   following   settings:
-
 b

rightness-video
 s
etting,
-
 
d
ate   and   time   setting,
-
 
s
election   of   units.
Once
  the   fuel   consumption   units   have  
b

een   changed   to   mpg,   the   information  
i

n   the   screen   relating   to   speed   and  
d

istance   also   changes   to   mph   and  
mil

es
 re
spectively. As
  a   safety   measure,   configuration   by  
t

he   driver   of   the   multifunction   screen  
s

hould   only   be   done   when   stationary.
Choice of language
Once this menu has been selected, you can change   the   language   used   by   the   screen   by  
c

hoosing   one   from   a   defined   list.With
  Audio   system   on,   once   this   menu   is  s
elected   you   can   configure   your   Bluetooth  h
ands-free   system   (pairing),   view   the   various  
t

elephone   directories   (list   of   calls,   services...)  
a

nd   manage   your   calls   (call,   hang   up,   second  
c

all,   secret   mode...).
For
  more   information   on   the   "Telephone"  
f

unction,   refer   to   the   "Audio   system"   section.
"Telephone" Menu
Setting the date and time
F Sel ect the " Set date and time" function
using
  the   "5 " or " 6"
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
A
djust   the   settings   one   by   one   using  
t

he "7 " or " 8"
  button   then   confirm  
w

ith "OK".
F

T
hen select the "OK"
 
box   in   the   screen  
a

nd   confirm.

49
DS3_en_Chap01_controle-de-marche_ed01-2015
Touch screen tablet
This system gives access to:
-  m enus   for   adjusting   settings   for   vehicle  
f

unctions   and   systems,
-
 
a
udio   and   display   configuration   menus,
-
 
a
udio   system   and   telephone   controls   and  
t

he   display   of   associated   information.
-
 
t
he   display   of   alert   messages,
-
 
t
he   display   of   ambient   temperature   (a   blue  
s

now   flake   appears   if   there   is   a   risk   of   ice),
-
 
t
he   trip   computer.
And,
  depending   on   equipment,   it   allows:
-
 
t
he   display   of   the   visual   parking   sensors  
i

nformation,
-
 
a
ccess   to   the   controls   for   the   navigation  
s

ystem   and   Internet   services,   and   the  
d

isplay   of   associated   information. After
  a   few   moments   with   no   action   on  
t

he   secondary   page,   the   primary   page  
i

s   displayed   automatically.
As
  a   safety   measure,   some   functions  
c

an   only   be   viewed   when   stationary.  
T

heir display is interrupted as soon as
the
  vehicle   moves   off.general operation
Recommendations
It is necessary to press firmly, particularly for "flick"   gestures   (scrolling   through   lists,   moving  
t

he
 m
ap...).
A
  light   wipe   is   not   enough.
The
  screen   does   not   recognise   pressing   with  
m

ore   than   one   finger.
This
  technology   allows   use   at   all   temperatures  
a

nd   when   wearing   gloves.
Do
  not   use   pointed   objects   on   the   touch   screen  
t

ablet.
Do not touch the touch screen tablet with wet
hands.
Uses a soft clean cloth to clean the touch
screen
 t

ablet.
Principles
Press the " MEn U" button for access to the
different   menus,   then   press   the   virtual   buttons  
i

n   the   touch   screen   tablet.
Each
  menu   is   displayed   over   one   or   two   pages  
(

primary   page   and   secondary   page).
Use the " Options"
  button   to   go   to   the  
s

econdary
 pag
e.
Use this button for access to
additional
  information   and   to   the  
s

ettings   for   certain   functions.
Use
  this   button   to   confirm.
Use this button to return to the
primary
  page   or   to   quit.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2015
Menus
navigation
Navigation  is   available   depending   on  
t

he   county   and/or   trim   level.
Refer
  to   the   "Audio   and   telematics"  
s

ection.
Radio Media
Refer
  tothe   "Audio   and   telematics"  
s

ection.
Settings
Allows
  configuration   of   the   display  
a

nd   the   system.
Refer
  to   the   corresponding   section.
Internet
These services are available
depending
  on   the   county   and/or   trim  
l

evel.
Refer
  to   the   "Audio   and   telematics"  
s

ection. Telephone
Refer
  to   the   "Audio   and   telematics"  
s

ection.
dr

iving
Allows
 

access
 
to
 
the
 
trip
 
computer
 
and,
 d

epending   on   version,   the   adjustment
 o

f   settings   for   certain   functions.
Refer
  to   the   corresponding   section.1.
 V

olume   /   mute.
Refer
  to   the   "Audio   and   telematics"   section.
Press this button, then select the
desired
 m

enu.

51
DS3_en_Chap01_controle-de-marche_ed01-2015
"driving" menu
ButtonCorresponding function Comments
di

agnostic Recap
  of   current   alerts.
Under-inflation initialisation Reinitialisation
  of   tyre   pressures.
Refer
  to   the   "Safety"   section.
Vehicle settings Access
  to   other   functions   with   settings   that   can   be   adjusted.   The   functions   are   grouped  
t

ogether   under   three   tabs:
-
"[
dr
iving assistance]"
-
 
"
Automatic   rear   wiper   in   reverse"   (Activation   of   rear   wiper   coupled   to   reverse   gear:   see  
t

he   " Visibility"   section)
-
 
"
Parking   sensors"   (Activation   of   rear   parking   sensors;   refer   to   the   "Driving"   section).
-
 
"
Automatic   emergency   braking"   (Active   City   Brake;   refer   to   the   "Safety"   section).
-
"[Lighting ]"
-
 
"
Mood   lighting"   (refer   to   the   " Visibility"   section).
-
 
"
[Guide-me-home   lighting]"   (Automatic   guide   me   home   lighting;   refer   to   the   " Visibility"  
s

ection).
Select
  or   deselect   the   tabs   at   the   bottom   of   the   screen   to   display   the   functions   required.
The
  functions   accessible   in   this   menu   are   given   in   the   table   below.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2015
"Settings" menu
The functions accessible in this menu are given in the table below.
Bu tton Corresponding function Comments
Audio settings Adjustment
  of   volume,   balance...
Turn off screen Turns
  off   the   display   in   the   the   touch   screen   tablet   (black   screen).
Pressing
  the   black   screen   (or   the   ME
n
U
 
button)   restores   the   display.
System Settings Choice
  of   units:
-
 
t
emperature   (°Celsius   or   °Fahrenheit)
-
 
d
istance   and   fuel   consumption   (l/100   km,   mpg   or   km/l).
Time/
d
a
te Setting
  the   date   and   time.
Languages Choice
  of   language   used   from   a   defined   list.
Screen settings Adjustment
  of   the   display   settings   (scrolling   of   text,   animations...)   and   the   screen   brightness.
Calculator Display
  the   calculator.
Calendar Display
  the   calendar.

DS3_en_Chap01_controle-de-marche_ed01-2015
Trip computer
Monochrome screen A
Information displays
F Press the button, located at the end of the wiper stalk ,
  to   display   the   various   items   of  
t

rip   computer   information   in   succession.The
  trip   computer   provides   the   following  
i

nformation:
-
 ra
nge,
-  
c
urrent   fuel   consumption,
-  
S
top   &   Start   time   counter,
- d istance travelled,
-  
a
verage   fuel   consumption,-
 a

verage
 s
peed.
F  
T
he   next   press   then   returns   you   to   the  
n

ormal
 d
isplay.
System   that   gives   you   information   on   the   current   journey   (range,   fuel   consumption…).
Trip reset
F Press
  the   control   for   more   than   two  s
econds to reset to zero the distance
travelled,
  the   average   fuel   consumption  
a

nd   the   average   speed.

55
DS3_en_Chap01_controle-de-marche_ed01-2015
Monochrome screen C
Information displays
F Press the button, located at the end of the wiper stalk , to display the various trip
computer
  tabs   in   succession: -
 
t
he   current   information   tab  
w

ith:
●  
t
he   range,
●  
t
he   current   fuel  
c

onsumption,
●  
t
he   distance   remaining  
to be travelled or the
Stop   &   Start   time   counter,
-
t
he trip "1"
 
tab   with:
●  
t
he   distance   travelled,
●  
t
he   average   fuel  
c

onsumption,
●  t he   average   speed, f
or   the   first   trip.
-

t
he trip "2"
 
tab   with:
●
 
t
he   distance   travelled,
●
 
t
he   average   fuel  
c

onsumption,
●
 
t
he   average   speed,
 f

or   the   second   trip.
F
 
P
ressing   the   button   again   returns   you   to  
t

he   normal   display.
Zero reset
F When  the   trip   required   is   displayed,   press  t
he   button   on   the   end   of   the   wiper   stalk   for  
m

ore   than   two   seconds.
Tr i p s "1" and "2" are independent but their use
is
  identical.
For
  example,   trip   "1" can be used for daily
figures,
  and   trip   "2"
 
for   monthly   figures.
Monitoring