tow Citroen DS3 RHD 2016 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2016, Model line: DS3 RHD, Model: Citroen DS3 RHD 2016 1.GPages: 380, PDF Size: 10.11 MB
Page 16 of 380

Before moving off, if the passenger compartment is too warm, ventilate it by  opening  the  windows  and  air  vents  before  using  the  air  conditioning.
Above
 30  mph  (50  km/h),  close  the  windows  and  leave  the  air  vents
 ope
n.
Remember
 to  make  use  of  equipment  that  can  help  keep  the
 t
emperature  in  the  passenger  compartment  down  (sunroof  and  window
 b
linds...).
Switch
 off  the  air  conditioning,  unless  it  has  automatic  regulation,
 a
s soon  as  the  desired  temperature  is  attained.
Switch
 off  the  demisting  and  defrosting  controls,  if  not  automatic.
Switch
 off  the  heated  seat  as  soon  as  possible.
Switch
 off  the  headlamps  and  front  foglamps  when  the  level  of  light Â
d
oes  not  require  their  use.
Avoid
 running  the  engine  before  moving  off,  particularly  in  winter;  your Â
v
ehicle  will  warm  up  much  faster  while  driving.
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your gearbox
With a manual gearbox, move off gently and change up without waiting. During  acceleration  change  up  early.
With
 an  automatic  or  electronic  gearbox,  give  preference  to  automatic Â
m
ode  and  avoid  pressing  the  accelerator  pedal  heavily  or  suddenly.
The
 gear  shift  indicator  invites  you  engage  the  most  suitable  gear:  as Â
s
oon  as  the  indication  is  displayed  in  the  instrument  panel,  follow  it Â
s
traight  away.
For
 vehicles  fitted  with  an  electronic  or  automatic  gearbox,  this Â
i
ndicator  appears  only  in  manual  mode.
drive smoothly
Maintain a safe distance between vehicles, use engine braking rather than  the  brake  pedal,  and  press  the  accelerator  progressively.  These Â
p
ractices  contribute  towards  a  reduction  in  fuel  consumption  and  CO
2
emissions
Â
and
Â
also
Â
helps
Â
reduce
Â
the
Â
background
Â
traffic
Â
noise.
Control the use of your electrical
equipment
If your vehicle has cruise control, make use of the system at speeds a bove  25  mph  (40  km/h)  when  the  traffic  is  flowing  well.As
 a  passenger,  if  you  avoid  connecting  your  multimedia  devices Â
(
film,  music,  video  game...),  you  will  contribute  towards  limiting  the  c
onsumption  of  electrical  energy,  and  so  of  fuel.
Disconnect  your  portable  devices  before  leaving  the  vehicle.
Page 25 of 380

23
Operation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has come into operation.
W arning /indicator lampis on Cause Action / Observations
Left-hand
direction indicatorflashing with buzzer.The  lighting  stalk  is  pushed  down.
Right-hand
direction indicatorflashing with buzzer.The  lighting  stalk  is  pushed  up.
Sidelamps fixed. The
 lighting  stalk  is  in  the  "Sidelamps" Â
p
osition.
di
pped beam
headlamps fixed.
The
 lighting  stalk  is  in  the  "Dipped Â
b
eam  headlamps"  position.
Main beam
headlamps fixed.
The
 lighting  stalk  is  pulled  towards Â
yo
u. Pull
 the  stalk  to  return  to  dipped  beam  headlamps.
Front foglamps fixed. The
 front  foglamps  are  switched  on Â
u
sing  the  ring  on  the  lighting  control Â
st
alk. Turn
 the  ring  on  the  lighting  control  stalk  rear ward Â
t
wice  to  switch  off  the  front  foglamps.
Rear foglamps fixed. The
 rear  foglamps  are  on.Turn
 the  ring  on  the  stalk  rear ward  to  switch  off  the Â
r
ear
 fo
glamps.
Hazard warning
lamps
flashing
 with  audible Â
s
ignal. The
 hazard  warning  lamps  switch, Â
l
ocated  on  the  dashboard,  has  been Â
ope
rated. The
 left-hand  and  right-hand  direction  indicators  and Â
t
heir  associated  indicator  lamps  flash  simultaneously.
Monitoring
Page 84 of 380

These have one position for use (up) and a stowed  position  (down).
They
 can  also  be  removed.
To
 remove  a  head  restraint:
F
Â
r
elease  the  backrest  using  control  1,
F
Â
t
ilt  the  backrest  2  slightly  for wards,
F
Â
p
ull  the  head  restraint  upwards  to  the  stop,
F
Â
t
hen,  press  the  lug  A.
Rear head restraints
Never drive with the head restraints r
emoved;  they  must  be  in  place  and Â
c
orrectly
 adj
usted.
Steering wheel ad justment
F When stationary , pull the control lever to
release  the  adjustment  mechanism.
F
Â
A
djust  the  height  and  reach  to  suit  your Â
d
riving  position.
F
Â
P
ush  the  control  lever  to  lock  the Â
a
djustment
 m
echanism.
As
 a  safety  measure,  these  operations Â
s
hould  only  be  carried  out  with  the Â
v
ehicle  stationary.
Page 88 of 380

Recommendations for ventilation and air conditioning
If after an extended stop in sunshine, the  interior  temperature  is  very Â
h
igh,  first  ventilate  the  passenger Â
c
ompartment  for  a  few  moments.
Put
 the  air  flow  control  at  a  setting  high Â
e
nough  to  quickly  change  the  air  in  the Â
p
assenger
 c
ompartment.
The
 air  conditioning  system  does  not Â
c
ontain  chlorine  and  does  not  present Â
a
ny  danger  to  the  ozone  layer.
In
Â
order
Â
for
Â
these
Â
systems
Â
to
Â
be
Â
fully
Â
effective,
Â
follow
Â
the
Â
operation
Â
and
Â
maintenance
 g
uidelines belo
w:
F
Â
T
o
Â
obtain
Â
an
Â
even
Â
air
Â
distribution,
Â
take
Â
care
Â
not
Â
to
Â
obstruct
Â
the
Â
exterior
Â
air
Â
intake
Â
grilles
Â
l
ocated
Â
at
Â
the
Â
base
Â
of
Â
the
Â
windscreen,
Â
the
Â
nozzles,
Â
the
Â
vents
Â
and
Â
the
Â
air
Â
outlets,
Â
as
Â
well
Â
a
s
Â
the
Â
air
Â
extractor
Â
located
Â
in
Â
the
Â
boot.
F
Â
D
o
Â
not
Â
cover
Â
the
Â
sunshine
Â
sensor,
Â
located
Â
on
Â
the
Â
dashboard;
Â
this
Â
is
Â
used
Â
for
Â
regulation
Â
o
f
Â
the
Â
air
Â
conditioning
Â
system.
F
Â
O
perate
Â
the
Â
air
Â
conditioning
Â
system
Â
for
Â
at
Â
least
Â
5
Â
to
Â
10
Â
minutes,
Â
once
Â
or
Â
twice
Â
a
Â
month
Â
t
o
Â
keep
Â
it
Â
in
Â
per fect
Â
working
Â
order.
F
Â
E
nsure
Â
that
Â
the
Â
passenger
Â
compartment
Â
filter
Â
is
Â
in
Â
good
Â
condition
Â
and
Â
have
Â
the
Â
filter
Â
e
lements
Â
replaced
Â
regularly.
 W
e
Â
recommend
Â
the
Â
use
Â
of
Â
a
Â
combined
Â
passenger
Â
compartment
Â
filter.
Â
Thanks
Â
to
Â
its
Â
s
pecial
Â
active
Â
additive,
Â
it
Â
contributes
Â
to
Â
the
Â
purification
Â
of
Â
the
Â
air
Â
breathed
Â
by
Â
the
Â
o
ccupants
Â
and
Â
the
Â
cleanliness
Â
of
Â
the
Â
passenger
Â
compartment
Â
(reduction
Â
of
Â
allergic
Â
s
ymptoms,
Â
bad
Â
odours
Â
and
Â
greasy
Â
deposits).
F
Â
T
o
Â
ensure
Â
correct
Â
operation
Â
of
Â
the
Â
air
Â
conditioning
Â
system,
Â
you
Â
are
Â
also
Â
advised
Â
to
Â
have
Â
i
t
Â
checked
Â
regularly
Â
as
Â
recommended
Â
in
Â
the
Â
maintenance
Â
and
Â
warranty
Â
guide.
F
Â
I
f
Â
the
Â
system
Â
does
Â
not
Â
produce
Â
cold
Â
air,
Â
switch
Â
it
Â
off
Â
and
Â
contact
Â
a
Â
CITROËN
Â
dealer
Â
or
Â
a
Â
qualified
Â
workshop.
When
Â
towing
Â
the
Â
maximum
Â
load
Â
on
Â
a
Â
steep
Â
gradient
Â
in
Â
high
Â
temperatures,
Â
switching
Â
off
Â
the
Â
a
ir
Â
conditioning
Â
increases
Â
the
Â
available
Â
engine
Â
power
Â
and
Â
so
Â
improves
Â
the
Â
towing
Â
ability. The
 condensation  created  by  the  air Â
c
onditioning  results  in  a  discharge Â
o
f  water  under  the  vehicle  which  is Â
p
er fectly  normal.
Page 94 of 380

6. Air distribution adjustment
Pressing this button several times in succession enables the air flow to be
directed
 in  turn  towards:
-
Â
t
he
Â
windscreen  and  the  side  windows Â
(
demisting  or  defrosting),
-
Â
t
he
Â
windscreen,  side  windows  and  air Â
ve
nts,
-
Â
t
he
Â
windscreen,  the  side  windows,  the  air Â
v
ents
 and  the  footwells,
-
Â
t
he
Â
windscreen,  the  side  windows  and  the Â
f
ootwells,
-
Â
t
he
Â
footwells,
-
Â
t
he
Â
air  vents  and  the  footwells,
-
Â
t
he
Â
air  vents.
Avoid driving for long periods with the air c onditioning  switched  off  (risk  of  misting a
nd  reduction  of  the  air  quality  in  the  cabin).
Press the "full fan" button to
increase  the  air  flow.
7. Air flow adjustment
The air flow symbol, the fan, fills progressively according  to  the  value  requested.
Press the "empty fan" button to
decrease
 the  air  flow.
Switching the system off
Press the air flow "empty fan"
button 7  until  the  fan  symbol Â
d
isappears.
This action switches off all of the functions of
the
Â
air
Â
conditioning  system.
Thermal
Â
comfort  is  no  longer  controlled.  A Â
s
light
Â
flow
 of  air  resulting  from  the  movement  of Â
t
he
Â
vehicle,  remains  perceptible  however.
Pressing
Â
the  air  flow  "full fan" button 7 or
on "AUTO"
Â
reactivates  the  system  with  the Â
v
alues
Â
set  before  it  was  switched  off.
Page 102 of 380

1. Rear parcel shelf  (
see  the  following  page  for  details)
2.
R
etaining strap
3.
L
ocation for Hi-Fi amplifier
4.
S
towing rings
5.
S
torage box (version equipped with a
temporary puncture repair kit)
 (
see  the  following  page  for  details)
or
T
ool box (version equipped with a spare
wheel)
 (
refer  to  the  "Changing  a  wheel"  section)
Boot fittings
Page 120 of 380

There is a risk of damage to the gearbox:
-  i f  you  press  the  accelerator  and Â
b
rake  pedals  at  the  same  time,
-
Â
i
f  you  force  the  movement  of  the Â
s
elector  from  the  P position to
another position when the battery
is
 flat.
To
 reduce  fuel  consumption  when  at Â
a
 prolonged  standstill  with  the  engine Â
r
unning  (traffic  jam...),  put  the  selector Â
i
n the n position  and  apply  the  parking Â
b
rake.
If the selector is not in position P
,
when
Â
the
Â
driver's
Â
door
Â
is
Â
opened
Â
or
Â
a
pproximately
Â
45
Â
seconds
Â
after
Â
the
Â
i
gnition
Â
is
Â
switched
Â
off,
Â
a
Â
warning
Â
m
essage
Â
appears
Â
in
Â
the
Â
screen.
F
R
eturn the selector to position P ;
Â
t
he
Â
message
Â
disappears.
When
Â
driving
Â
on
Â
flooded
Â
roads
Â
or
Â
when
Â
c
rossing
Â
a
Â
ford,
Â
proceed
Â
at
Â
walking
Â
p
ace.
Operating fault
Manual operation
When the ignition is on, the lighting o
f  this  warning  lamp,  accompanied Â
b
y
Â
an
Â
audible  signal  and  a  message  in  the Â
m
ultifunction  screen,  indicates  a  gearbox  fault.
In
Â
this
Â
case,  the  gearbox  switches  to  back-up Â
m
ode
Â
and
Â
is  locked  in  3rd  gear.  You  may  feel Â
a
Â
substantial  knock  when  changing  from  P
to R
Â
and
Â
from  n to R .
 This  will  not  cause  any Â
d
amage
Â
to
Â
the  gearbox.
Do
Â
not
Â
exceed  60  mph  (100  km/h),  local  speed Â
r
estrictions
 p
ermitting.
Contact
Â
a
Â
CITROËN  dealer  or  a  qualified Â
w
orkshop
Â
as  soon  as  possible.
F
Sel
ect position M for sequential c
hanging o
f
Â
the
Â
four
Â
gears.
F
Â
P
ush
Â
the
Â
selector
Â
towards
Â
the
Â
+
Â
sign
Â
to
Â
c
hange
Â
up
Â
a
Â
gear.
F
Â
P
ull
Â
the
Â
selector
Â
towards
Â
the
Â
-
Â
sign
Â
to
Â
c
hange
Â
down
Â
a
Â
gear.
It
Â
is
Â
only
Â
possible
Â
to
Â
change
Â
from
Â
one
Â
gear
Â
to
Â
a
nother
Â
if
Â
the
Â
vehicle
Â
speed
Â
and
Â
engine
Â
speed
Â
p
ermit;
Â
other wise,
Â
the
Â
gearbox
Â
will
Â
operate
Â
t
emporarily
Â
in
Â
automatic
Â
mode. This
Â
symbol
Â
is
Â
displayed
Â
if
Â
a
Â
gear
Â
i
s
Â
not
Â
engaged
Â
correctly
Â
(selector
Â
b
etween
Â
two
Â
positions).
d
Â
disappears
Â
and
Â
the
Â
gears
Â
e
ngaged
Â
appear
Â
in
Â
succession
Â
in
Â
the
Â
in
strument
 pan
el.
Stopping the vehicle
Before switching off the engine, you can engage p osition P or
nÂ
to  place  the  gearbox  in  neutral.
In
 both  cases,  apply  the  parking  brake  to Â
i
mmobilise  the  vehicle.
Invalid value during manual
operation
If the engine speed is too low or too high, the gear  selected  flashes  for  a  few  seconds,  then Â
t
he  actual  gear  engaged  is  displayed.
It
 is  possible  to  change  from  position  d
(automatic)
 to  position  M  (manual)  at  any  time.
When
 the  vehicle  is  stationary  or  moving Â
v
ery  slowly,  the  gearbox  selects  gear  M1
automatically.
The
 sport  and  snow  programmes  do  not Â
o
perate  in  manual  mode.
Page 124 of 380

To reduce fuel consumption when at a prolonged  standstill  with  the  engine Â
r
unning  (traffic  jam...),  put  the  selector Â
i
n the n  position  and  apply  the  parking Â
b
rake.
If the selector is not in position P
,
when
Â
the
Â
driver's
Â
door
Â
is
Â
opened
Â
or
Â
a
pproximately
Â
45
Â
seconds
Â
after
Â
the
Â
i
gnition
Â
is
Â
switched
Â
off,
Â
a
Â
warning
Â
m
essage
Â
appears
Â
in
Â
the
Â
screen.
F
R
eturn the selector to position P
;
 t
he
Â
message
Â
disappears.
When
Â
driving
Â
on
Â
flooded
Â
roads
Â
or
Â
when
Â
c
rossing
Â
a
Â
ford,
Â
proceed
Â
at
Â
walking
Â
p
ace. There
 is  a  risk  of  damage  to  the  gearbox:
- Â
i
f  you  press  the  accelerator  and Â
b
rake  pedals  at  the  same  time,
- Â
i
f  you  force  the  movement  of  the Â
s
elector  from  the  P position to
another position when the battery
is  flat.
F
Sel
ect position M for sequential
 c
hanging
 o
f
Â
the
Â
six
Â
gears.
F
Â
M
ove
Â
the
Â
selector
Â
towards
Â
the
Â
+
Â
sign
Â
to
Â
c
hange
Â
up
Â
a
Â
gear.
F
Â
M
ove
Â
the
Â
selector
Â
towards
Â
the
Â
-
Â
sign
Â
to
Â
c
hange
Â
down
Â
a
Â
gear.
It
Â
is
Â
only
Â
possible
Â
to
Â
change
Â
from
Â
one
Â
gear
Â
to
Â
a
nother
Â
if
Â
the
Â
vehicle
Â
speed
Â
and
Â
engine
Â
speed
Â
p
ermit;
Â
other wise,
Â
the
Â
gearbox
Â
will
Â
operate
Â
t
emporarily
Â
in
Â
automatic
Â
mode.
Manual operation
d disappears and the gears e
ngaged  appear  in  succession  in  the Â
in
strument
 pan
el.
If
Â
the
Â
engine  speed  is  too  low  or  too  high,  the Â
g
ear
Â
selected  flashes  for  a  few  seconds,  then Â
t
he
Â
actual
 gear  engaged  is  displayed.
It
Â
is
Â
possible  to  change  from  position  d
(automatic)
 to  position  M  (manual)  at  any  time.
When
Â
the
 vehicle  is  stationary  or  moving Â
v
ery
Â
slowly,  the  gearbox  engages  first  gear Â
au
tomatically.
Invalid value during manual
operation
This symbol is displayed if a gear i s  not  engaged  correctly  (selector Â
b
etween  two  positions).
Stopping the vehicle
Before switching off the engine, you can engage  position  P or n to  place  the  gearbox  in Â
neu
tral.
In
 both  cases,  apply  the  parking  brake  to Â
i
mmobilise  the  vehicle. When
 the  ignition  is  on,  the  lighting Â
o
f  this  warning  lamp,  accompanied Â
Operating fault
by an audible signal and a message in the m
ultifunction  screen,  indicates  a  gearbox  fault.
In
 this  case,  the  gearbox  switches  to  back-up Â
m
ode  and  is  locked  in  3rd  gear.  You  may  feel Â
a
 substantial  knock  when  changing  from  P
to R
 and  from  n to R.
 This  will  not  cause  any Â
d
amage  to  the  gearbox.
Do
 not  exceed  60  mph  (100  km/h),  local  speed Â
r
estrictions
 p
ermitting.
Contact
 a  CITROËN  dealer  or  a  qualified Â
w
orkshop  as  soon  as  possible.
Page 135 of 380

133
Front parking sensors*Operating fault
In the event of a malfunction of the s
ystem, w hen r everse g ear i s enga ged t
his
Â
warning
 lamp  is  displayed  in  the  instrument
 p
anel
Â
and/or
 a  message  appears  in  the  screen,
 a
ccompanied  by  an  audible  signal  (short  beep).
Contact
Â
a
Â
CITROËN  dealer  or  a  qualified
 w
orkshop.In addition to the rear parking sensors, the f ront  parking  sensors  are  triggered  when  an Â
o
bstacle  is  detected  in  front  and  the  speed  of Â
t
he  vehicle  is  still  below  6  mph  (10  km/h).
The
 front  parking  sensors  are  interrupted  if Â
t
he  vehicle  stops  for  more  than  three  seconds Â
i
n  for ward  gear,  if  no  further  obstacles  are Â
d
etected  or  when  the  speed  of  the  vehicle Â
e
xceeds  6  mph  (10  km/h).
The
 sound  emitted  by  the  speaker Â
(
front  or  rear)  indicates  whether  the Â
o
bstacle  is  in  front  or  behind. In
 bad  weather  or  in  winter,  ensure Â
t
hat  the  sensors  are  not  covered  with Â
m
ud,  ice  or  snow.  When  reverse  gear  is Â
e
ngaged,  an  audible  signal  (long  beep) Â
i
ndicates  that  the  sensors  may  be  dirty.
Certain
 sound  sources  (motorcycle, Â
l
orry,  pneumatic  drill,  etc.)  may  trigger Â
t
he  audible  signals  of  the  parking Â
s
ensor  system.
The
 function  will  be  deactivated Â
a
utomatically  if  a  trailer  is  being  towed Â
o
r  a  bicycle  carrier  is  fitted  (vehicle Â
f
itted  with  a  towbar  or  bicycle  carrier Â
r
ecommended  by  CITROËN).
*
 Depending  on  version.
deactivation / Activation of
the front and rear parking
sensors
You can activate or deactivate the function using  the  vehicle's  configuration  or  settings Â
m
enu.
The
 status  of  the  system  is  memorised  when Â
s
witching  off  the  ignition.
driving
Page 147 of 380

145
B. Rear  wiper  selection  ring.
Rear wiper
If a significant accumulation of snow or i
ce  is  present,  or  when  using  a  tailgate Â
b
icycle Â
c
arrier, Â
d
eactivate Â
t
he Â
a
utomatic Â
r
ear  wiper  via  the  vehicle  configuration Â
o
r  settings  menu. Park.
Intermittent
 wipe.
Wash-wipe  (set  duration).
Reverse gear
When reverse gear is engaged, the rear wiper w
ill  come  into  operation  if  the  windscreen Â
w
ipers  are  operating.
Programming
The function is activated or deactivated via the vehicle  configuration  or  settings  menu.
This
 function  is  activated  by  default.
Windscreen wash
Pull the wiper stalk towards you. The  windscreen  wash,  then  the  windscreen Â
w
ipers,  operate  for  a  pre-determined  time.
Visibility