display Citroen DS3 RHD 2016 1.G Owner's Guide

55
Monochrome screen C
Information displays
F Press  the   button,   located   at   the   end   of  t
he wiper stalk ,
  to   display   the   various   trip  
c

omputer   tabs   in   succession. -
 
t
he   current   information   tab  
w

ith:
●  
t
he   range,
●  
t
he   current   fuel  
c

onsumption,
●  
t
he   distance   remaining  
to   be   travelled   or   the  
Stop   &   Start   time   counter.
-  
t
he   trip   "1"
 
tab   with:
●  
t
he   distance   travelled,
●  
t
he   average   fuel  
c

onsumption,
●  t he   average   speed, f
or   the   first   trip.
-
 
t
he   trip   "2"
 
tab   with:
●
 
t
he   distance   travelled,
●
 
t
he   average   fuel  
c

onsumption,
●
 
t
he   average   speed,
 f

or   the   second   trip.
F
 
P
ressing   the   button   again   returns   you   to  
t

he   normal   display.
Trip reset
F When  the   trip   required   is   displayed,   press  t
he   button   on   the   end   of   the   wiper   stalk   for  
m

ore   than   two   seconds.
Tr i p s "1"
 

and   "2"
 
are   independent   but   their   use  
i

s   identical.
For
  example,   trip   "1"
 
can   be   used   for   daily  
f

igures,   and   trip   "2"
 
for   monthly   figures.
Monitoring

Touch screen tablet
Information display
F Press the MEnU button, then select
"dr iving",
  to   display   the   various   tabs.
F
 
S
elect   the   desired   tab   using   your   finger.-
 
T
he   "
Instantaneous "   tab   with:
●  
t
he   range,
●  
t
he   current   fuel   consumption,
●  
t
he   Stop   &   Start   time   counter.
-  
t
he   "
Tr i p 1 "   tab   with:
●  
t
he   distance   travelled,
●  
t
he   average   fuel   consumption,
●  
t
he   average   speed,  
 
f
or   the   first   trip.
-  
t
he   "Tr i p 2 "
  tab   with:
●
 
t
he   distance   travelled,
●
 
t
he   average   fuel   consumption,
●
 
t
he   average   speed,  
 
f

or   the   second   trip.
Trip reset
F When  the   desired   trip   is   displayed,   press  t
he   reset   button.
Tr i p s "1"
 

and   "2"
 
are   independent   but   their   use  
i

s   identical.
For
  example,   trip   "1"
 
can   be   used   for   daily  
f

igures,   and   trip   "2"
 
for   monthly   figures.

57
A few definitions
Range
(miles or km)
Current fuel consumption
(mpg or l/100 km or km/l)
Stop & Start time
counter
(minutes / seconds or hours / minutes)
This
 
value
 
may
 
vary
 
following
 
a
 
change
 
i

n
 
the
 
style
 
of
 
driving
 
or
 
the
 
relief,
 
r

esulting
 
in
 
a
 
significant
 
change
 
in
 
the
 
c

urrent
 
fuel
 
consumption.
If
 
dashes
 
are
 
displayed
 
continuously
 
w

hile
 
driving
 
in
 
place
 
of
 
the
 
digits,
 
c

ontact
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
When
 
the
 
range
 
falls
 
below
 
20
 
miles
 
(30
 
km),
 
d

ashes
 
are
 
displayed.
 
After
 
filling
 
with
 
at
 
least
 
5

 
litres
 
of
 
fuel,
 
the
 
range
 
is
 
recalculated
 
and
 
is
 
d

isplayed
 
when
 
it
 
exceeds
 
60
 
miles
 
(100
 
km).
distance remaining to
destination
(miles or km)
T
he
 
distance
 
which
 
can
 
still
 
be
 
travelled
 
with
 
t

he
 
fuel
 
remaining
 
in
 
the
 
tank
 
(related
 
to
 
the
 
a

verage
 
fuel
 
consumption
 
over
 
the
 
last
 
few
 
m

iles
 (

kilometres)
 t

ravelled). Calculated
 
over
 
the
 
last
 
few
 
seconds.
This
 
is
 
the   distance   remaining   to   be   travelled  
t

o
 
the
 
final   destination.   It   can   be   entered   by  
t

he user.
If
 
the
 
distance   is   not   entered,   dashes   are  
d

isplayed
  in   place   of   the   digits.
If
 
your
 
vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter
 
calculates   the   time   spent   in   STOP  
m

ode
 
during   a   journey.  
I

t
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on   with   the   key.
distance travelled
(miles or km)
C
alculated
 
since   the   last   trip   reset.
Average speed
(mph or km/h)
C
alculated   since   the   last   trip   reset.
Average fuel
consumption
(mpg or l/100 km or km/l)
C
alculated
 
since   the   last   trip   reset.
This
 
function   is   only   displayed   from  
2

0 mph
  (30   km/h).
Trip computer
Monitoring

Digital air conditioningThe air conditioning operates when the engine is running, as well as in STOP mode with Stop & Start.
Automatic operation
1. Automatic "comfort" programme
Press the "AUTO"  button.  T
he "AUTO"  symbol   is   displayed. For
  your   comfort,   when   the   engine   is  
s

witched   off,   the   settings   are   retained  
u

ntil   the   engine   is   switched   on   again.
To   prevent   too   great   a   distribution   of  
c

old   air   when   the   engine   is   cold,   the   air  
f

low   will   only   reach   its   optimum   level  
g

radually.
2. Temperature adjustment
The value indicated on the display corresponds t
o   a   level   of   comfort   and   not   to   a   temperature   in  
d

egrees   Celsius   or   Fahrenheit. On
  entering   the   vehicle,   if   the   interior  
i

s   very   cold   or   hot,   there   is   no   need   to  
c

hange   the   value   displayed   in   order  
t

o   reach   the   required   level   of   comfort.  
T

he   system   corrects   the   temperature  
d

ifference   automatically   and   as   quickly  
a

s   possible.
Press the " 5"
  and   "6 " buttons to
change
  this   value.   A   setting   around  
t

he value 21
 
enables   optimum  
c

omfort   to   be   obtained.   However,  
d

epending   on   your   requirements,   a  
s

etting   between   18   and   24   is   usual.
3. Automatic "visibility" programme
The automatic comfort programme m
ay   not   be   sufficient   for   rapid  
d

emisting   or   defrosting   of   the  
w

indscreen   and   side   windows  
(

humidity,
 se
veral
 p
assengers,
 i

ce, etc.).
With
  Stop   &   Start,   when   demisting   has  
b

een   activated,   the   STOP   mode   is   not  
a

vailable.
In
 
this
 
case,   select   the   automatic   visibility  
p

rogramme.   The   indicator   lamp   in   the   button   3
comes
 
on.
The
 
system   automatically   controls   the   air  
c

onditioning   and   the   flow   of   air   and   provides  
o

ptimum
 
air   distribution   to   the   windscreen   and  
s

ide
 
windows.   It   deactivates   air   recirculation   5.
To
 
exit
 
this   programme,   press   button   3   again   or  
"A

UTO" ,
 
the   indicator   lamp   in   the   button   goes  
o

ff
 
and
 
"AUTO"
 
is   displayed.
We
 
recommend
 
that
 
you
 
use
 
this
 
mode.
 
I

t
 
provides
 
optimised
 
automatic
 
control
 
of
 
a

ll
 
of
 
the
 
following
 
functions:
 
passenger
 
c

ompartment
 
temperature,
 
air
 
flow,
 
air
 
d

istribution
 
and
 
air
 
intake,
 
in
 
accordance
 
with
 
t

he
 
comfort
 
value
 
that
 
you
 
have
 
chosen.
This
 
system
 
is
 
designed
 
to
 
operate
 
effectively
 
i

n
 
all
 
seasons,
 
with
 
the
 
windows
 
closed.

91
It is possible to adjust one or more functions manually   while   leaving   the   other   functions   in  
a

utomatic   mode.
The "AUTO"
 

symbol   switches   off.
To
  return   to   automatic   mode,   press   the   "AUTO"
button.
Manual override
4. Air conditioning on/off
For maximum cooling or heating of the c abin,   it   is   possible   to   go   beyond   the  
m

inimum   14   or   maximum   28   values.
F

P
ress the blue button 2 until "LO"
is
  displayed   or   the   red   button   2
until
"HI"
 
is   displayed. Press this button to switch off the air
conditioning.
Stopping
  the   air   conditioning   may   cause
 s

ome   problems   (humidity,   misting).
5. Air intake / Air recirculation
Press this button for recirculation of
the
  interior   air.   The   air   recirculation  
s

ymbol
 5
  is   displayed.
Avoid
  prolonged   recirculation   of  
i

nterior   air   (risk   of   condensation   or  
d

eterioration   of   the   air   quality).
Switching
 
to
 
manual
 
mode
 
may
 
not
 
be
 
s

uitable
 
(temperature,
 
humidity,
 
odour,
 
c

ondensation)
 
and
 
does
 
not
 
provide
 
o

ptimum
 c

omfort. Automatic
 
operation
 
of
 
the
 
air
 
conditioning
 
is
 
r

esumed
 
when
 
the
 
button
 
is
 
pressed
 
again.
 

The
 
symbol
 
"A /C "
 

is
 
displayed. Air
 
recirculation   enables   the   passenger  
c

ompartment   to   be   isolated   from   exterior  
o

dours
 
and   smoke.
Press
 
this
  button   again   or   press   the   "AUTO"
button
 
to
 
resume   automatic   management   of  
t

he
 
intake
  of   air.   The   air   recirculation   symbol   5
goes
 
off.
Comfort

Auxiliary socketUSB Player
When it is in use, the portable device c
harges a utomatically.
12 V accessory socket
F To  connect   a   12   V   accessory   (max   power:  1
20   W),   lift   the   cover   and   connect   a  
s

uitable
 a
daptor.
The
 
management
 
of
 
the
 
files
 
is
 
done
 
u

sing
 
your
 
portable
 
device.
The
 
socket
 
is
 
located
 
in
 
the
 
"
AUX "
 
box
 
on
 
the
 
c

entre
 
console.
It
 
permits
 
the
 
connection
 
of
 
a
 
portable
 
device,
 
s

uch
 
as
 
a
 
digital
 
audio
 
player
 
of
 
the
 
iPod
® type,
to
 
listen
 
to
 
your
 
music
 
files
 
using
 
the
 
vehicle's  
s

peakers.
For
 
more
 
information
 
on
 
the
 
use
 
of
 
this
 
e

quipment,
 
refer
 
to
 
the
 
"Audio
 
and
 
telematics"  
s

ection. For
  more   information   on   the   use   of   this  
e

quipment,   refer   to   the   "Audio   and   telematics"  
s

ection.
The
  USB   port   is   located   in   the   "AUX "
 
box   on   the
 c

entre   console.
It   permits   the   connection   of   a   portable   device,
 s
uch   as   a   digital   audio   player   of   the   iPod®
generation
 
5
 
and
 
later
 
type
 
or
 
USB
 
memory   stick t

ype.
It
 
reads
 
the
 
audio
 
file
 
formats
 
(mp3,
 
ogg,
 
wma,
 w

av...)
 
sent
 
to
 
your
 
audio
 
system
 
and
 
played   via
 t

he
 
vehicle's
 
speakers.
You
 
can
 
manage
 
these
 
files
 
using
 
the
 
steering
 m

ounted
 
controls
 
or
 
the
 
audio
 
system
 
control
 p

anel
 
and
 
display
 
them
 
in
 
the
 
multifunction   screen. The
  connection   of   an   electrical   device  
n

ot   approved   by   CITROËN,   such   as   a  
U

SB   charger,   may   adversely   affect   the  
o

peration   of   vehicle   electrical   systems,  
c

ausing   faults   such   as   poor   telephone  
r

eception   or   inter ference   with   displays  
i

n   the   screens.

111
display in the instrument panel
n. Neutral
R. R everse
1 2 3 4 5 / 6.
  Gears   in   manual   mode.
AUTO.
 

 
T
his   comes   on   when   automated   mode  
i

s   selected.   It   goes   off   when   changing  
t

o   manual   mode.
Moving off
F Select position n.
F  P ress   the   brake   pedal   fully.
F
 
S
tart   the   engine.
n

  appears   in   the   instrument   panel.
If
  the   engine   does   not   start:
-
 
I
f  n  is   flashing   in   the   instrument  
p

anel,   move   the   gear   selector   to  
p

osition A, then to position
n
.F

 S elect   automated   mode   (position   A
), m
anual   mode   (position   M)   or   reverse  
(

position
 R).
AU

TO
 
and   1, 1 or R appear in the
instrument
 pan

el.
F
 
R
elease   the   parking   brake.
F
 
P
rogressively   take   your   foot   off   the   brake  
ped

al.
Depending
  on   the   type   of   electronic  
g

earbox,   the   vehicle   may   move   off   on  
i

ts   own.
For
  more   information,   refer   to   the  
"

Creep   function"   section.
Do
  not   press   the   brake   and   clutch  
p

edals   simultaneously.   This   can   cause  
r

apid   clutch   wear.
F
 
A
ccelerate   away.
-
 
I
f   this   warning   lamp  
c

omes   on,   accompanied  
b

y   an   audible   signal   and  
t

he  
d
isplay  
o
f  
a
 
m
essage,  
p

ress   firmly   on   the   brake  
ped

al.
driving

When you move the selector in the gate to select   a   position,   the   corresponding   indicator   is  
d

isplayed   in   the   instrument   panel.
P.
 Pa

rk
R.
R

everse
n. N

eutral
d

.
 D
rive   (Automatic   driving)
S.
Sport
 pro
gramme
T .
Snow
 pro
gramme
1 2 3 4.
  
G
ears   engaged   during   manual  
ope

ration
-.
 I

nvalid   value   during   manual   operation
displays in the instrument panel
Foot on brake
F Press  the   brake   pedal   when   this  i
ndicator   lamp   is   displayed   in   the  
i

nstrument   panel   (e.g.:   starting  
t

he
 eng
ine).
Moving off
If position n is selected inadvertently while   driving,   allow   the   engine   to  
r

eturn   to   idle   then   select   position  d to
accelerate.
If
  the   ambient   temperature   is  
b

elow -23°C,   the   engine   should   be   left  
a

t   idle   for   four   minutes,   to   ensure   the  
c

orrect   operation   and   life   of   the   engine  
an

d
 g
earbox. When
  the   engine   is   running   at   idle,   with  
t

he   brakes   released,   if   position   R
, d or
M   is   selected,   the   vehicle   moves   even  
w

ithout   the   accelerator   being   pressed.
When   the   engine   is   running,   never  
l

eave   children   in   the   vehicle   without  
sup

ervision.
When   carrying   out   maintenance   with  
t

he   engine   running,   apply   the   parking  
b

rake   and   select   position   P
.
F
 
A

pply   the   parking   brake.
F

Sel
ect position P or n
.
F

 
S

tart   the   engine.
If
 
this
 
procedure   is   not   followed,   there   is   an  
a

udible   signal,   accompanied   by   the   display   of  
a

n
 
warning   message.
F
 
W
ith   the   engine   running,   press   the   brake  
ped

al.
F
 
R

elease   the   parking   brake.
F

Sel
ect position R
, d or M
.
F
 
G

radually   release   the   brake   pedal.
The
 
vehicle   moves   off   immediately.

There is a risk of damage to the gearbox:
-  i f   you   press   the   accelerator   and  
b

rake   pedals   at   the   same   time,
-
 
i
f   you   force   the   movement   of   the  
s

elector   from   the   P position to
another position when the battery
is
  flat.
To
  reduce   fuel   consumption   when   at  
a

  prolonged   standstill   with   the   engine  
r

unning   (traffic   jam...),   put   the   selector  
i

n the n  position   and   apply   the   parking  
b

rake.
If the selector is not in position P
,
when
 
the
 
driver's
 
door
 
is
 
opened
 
or
 
a

pproximately
 
45
 
seconds
 
after
 
the
 
i

gnition
 
is
 
switched
 
off,
 
a
 
warning
 
m

essage
 
appears
 
in
 
the
 
screen.
F

R

eturn the selector to position P ;
 
t

he
 
message
 
disappears.
When
 
driving
 
on
 
flooded
 
roads
 
or
 
when
 
c

rossing
 
a
 
ford,
 
proceed
 
at
 
walking
 
p

ace.
Operating fault
Manual operation
When the ignition is on, the lighting o
f   this   warning   lamp,   accompanied  
b

y
 
an
 
audible   signal   and   a   message   in   the  
m

ultifunction   screen,   indicates   a   gearbox   fault.
In
 
this
 
case,   the   gearbox   switches   to   back-up  
m

ode
 
and
 
is   locked   in   3rd   gear.   You   may   feel  
a

 
substantial   knock   when   changing   from   P
to R
 
and
 
from  n to R .
  This   will   not   cause   any  
d

amage
 
to
 
the   gearbox.
Do
 
not
 
exceed   60   mph   (100   km/h),   local   speed  
r

estrictions
 p
ermitting.
Contact
 
a
 
CITROËN   dealer   or   a   qualified  
w

orkshop
 
as   soon   as   possible.
F
Sel
ect position M for sequential c
hanging o
f
 
the
 
four
 
gears.
F
 
P

ush
 
the
 
selector
 
towards
 
the
 
+
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F
 
P

ull
 
the
 
selector
 
towards
 
the
 
-
 
sign
 
to
 
c

hange
 
down
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 
p

ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 
t

emporarily
 
in
 
automatic
 
mode. This
 
symbol
 
is
 
displayed
 
if
 
a
 
gear
 
i

s
 
not
 
engaged
 
correctly
 
(selector
 
b

etween
 
two
 
positions).
d

 
disappears
 
and
 
the
 
gears
 
e

ngaged
 
appear
 
in
 
succession
 
in
 
the
 
in

strument
 pan

el.
Stopping the vehicle
Before switching off the engine, you can engage p osition P or
n 
to   place   the   gearbox   in   neutral.
In
  both   cases,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle.
Invalid value during manual
operation
If the engine speed is too low or too high, the gear   selected   flashes   for   a   few   seconds,   then  
t

he   actual   gear   engaged   is   displayed.
It
  is   possible   to   change   from   position  d
(automatic)
  to   position   M   (manual)   at   any   time.
When
  the   vehicle   is   stationary   or   moving  
v

ery   slowly,   the   gearbox   selects   gear   M1
automatically.
The
  sport   and   snow   programmes   do   not  
o

perate   in   manual   mode.

11 9
Six-speed automatic gearbox which offers a choice   between   the   comfort   of   fully   automatic  
o

peration   or   manual   gear   changing.
Two
  driving   modes   are   available:
-
 
a
utomatic operation with electronic
management
  of   the   gears   by   the   gearbox,
-
 
m
anual
 
operation   for   sequential   changing  
o

f   the   gears   by   the   driver.
Automatic gearbox (EAT6)
P. Park.
- I mmobilisation   of   the   vehicle,   parking   brake  
o

n   or   off.
-
 
S
tarting   the   engine.
R.
 R

everse.
-
 
R
eversing   manoeuvres,   vehicle   stationary,  
e

ngine   at   idle.
n. N

eutral.
-
 
I
mmobilisation   of   the   vehicle,   parking  
b

rake on.
-
 
S
tarting   the   engine.
d

.
 A
utomatic
 ope
ration.
M + / -.
  
M
anual   operation   with   sequential  
c

hanging   of   the   six   gears.
F
 
P
ull   backward   to   change   up   through   the  
g

ears.


or
F

 
P
ush   for ward   to   change   down   through   the  
g

ears. When
  you   move   the   selector   to   select   a  
p

osition,   the   corresponding   indicator   is  
d

isplayed   in   the   instrument   panel.
P.
 Pa

rk
R.


Reverse
n. N

eutral
d

.
 D
rive
 (
Automatic
 ope
ration)
1 2 3 4 5 6.
  
G
ears   engaged   during   manual  
ope

ration
-.
 I

nvalid   value   during   manual   operation
gear selector positionsdisplays in the instrument panel
Foot on brake
F Press  the   brake   pedal   when   this  i
ndicator   lamp   is   displayed   in   the  
i

nstrument   panel   (e.g.:   starting  
t

he
 eng
ine).
driving