ESP Citroen DS3 RHD 2016 1.G Owner's Manual

23
Operation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has come into operation.
W arning /indicator lampis on Cause Action / Observations
Left-hand
direction indicatorflashing with buzzer.The   lighting   stalk   is   pushed   down.
Right-hand
direction indicatorflashing with buzzer.The   lighting   stalk   is   pushed   up.
Sidelamps fixed. The
  lighting   stalk   is   in   the   "Sidelamps"  
p

osition.
di

pped beam
headlamps fixed.
The
  lighting   stalk   is   in   the   "Dipped  
b

eam   headlamps"   position.
Main beam
headlamps fixed.
The
  lighting   stalk   is   pulled   towards  
yo

u. Pull
  the   stalk   to   return   to   dipped   beam   headlamps.
Front foglamps fixed. The
  front   foglamps   are   switched   on  
u

sing   the   ring   on   the   lighting   control  
st

alk. Turn
  the   ring   on   the   lighting   control   stalk   rear ward  
t

wice   to   switch   off   the   front   foglamps.
Rear foglamps fixed. The
  rear   foglamps   are   on.Turn
  the   ring   on   the   stalk   rear ward   to   switch   off   the  
r

ear
 fo
glamps.
Hazard warning
lamps
flashing
  with   audible  
s

ignal. The
  hazard   warning   lamps   switch,  
l

ocated   on   the   dashboard,   has   been  
ope

rated. The
  left-hand   and   right-hand   direction   indicators   and  
t

heir   associated   indicator   lamps   flash   simultaneously.
Monitoring

Warning/indicator lampis on Cause Action / Observations
di

esel engine
pre-heating fixed.
The
  key   is   at   position   2   (ignition   on)   in  
t

he   ignition   switch.Wait
  until   the   warning   lamp   goes   off   before   starting.
The
  period   of   illumination   of   the   warning   lamp   is  
d

etermined   by   the   ambient   conditions   (up   to   about  
t

hirty   seconds   in   very   low   temperatures).
If
  the   engine   does   not   start,   switch   the   ignition   off   and  
t

hen   on,   wait   until   the   warning   lamp   goes   off   again,  
t

hen   start   the   engine.
Parking brake fixed. The
  parking   brake   is   applied   or   not  
p

roperly
 r
eleased.Release
  the   parking   brake   to   switch   off   the   warning  
l

amp,   keeping   your   foot   on   the   brake   pedal.
Observe
  the   safety   recommendations.
For
  more   information   on   the   parking   brake,   refer   to   the  
c

orresponding
 s
ection.
Stop & Star t fixed. When
  the   vehicle   stops   (red   lights,
 t

raffic   jams, ...)   the   Stop   &   Start   system
 h

as   put   the   engine   into   STOP   mode.The
  warning   lamp   goes   off   and   the   engine   restarts  
a

utomatically   in   START   mode,   as   soon   as   you   want   to  
m

ove   off.
flashes for a few
seconds,
  then   goes   off.STOP
  mode   is   temporarily  
u

navailable.
or
START
  mode   is   invoked  
au

tomatically.For
  more   information   on   Stop   &   Start,   refer   to   the  
c

orresponding
 s
ection.

deactivation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.
T his   is   may   be   accompanied   by   an   audible   signal   and   a   message   in   the   multifunction   screen.
Warning /indicator lampis on Cause Action / Observations
Passenger's
airbag system fixed.
The
  control,   located   in   the   glove   box,  
i

s set to the OFF
 p
osition.
The
  passenger's   front   airbag   is  
d

eactivated.
You
  can   install   a   rear ward   facing  
c

hild   seat,   unless   there   is   a   fault   with  
t

he   operation   of   the   airbags   (Airbag  
w

arning   lamp   on).Set the control to the O
n p

osition to activate the
passenger's
  front   airbag.
In
  this   case,   do   not   fit   a   child   seat   in   the   rear ward  
f

acing   position.

Warning/indicator lampis on Cause Action / Observations
Under-inflation fixed,
  accompanied   by  
a

n   audible   signal   and   a  
m

essage.The
  pressure   in   one   or   more   tyres   is  
t

oo   low.Check
  the   tyre   pressures   as   soon   as   possible.
This
  check   should   preferably   be   carried   out   when   the  
t

yres   are   cold.
You
  must   reinitialise   the   system   after   the   adjustment   of  
o

ne   or   more   tyre   pressures   and   after   changing   one   or  
m

ore   wheels.
For
  more   information   on   under-inflation   detection,   refer  
t

o   the   corresponding   section.
+ flashing
  then   fixed,  
a

ccompanied   by   the  
S

ervice   warning   lamp.The
  system   has   fault:   the   tyre  
p

ressures   are   no   longer   monitored.Check
  the   tyre   pressures   as   soon   as   possible.
Have
  the   system   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.

33
Warning/indicator lampis on Cause Action / Observations
AdBlue
® additive
(BlueH
d i d iesel) fixed,
  on   switching  o
n   the   ignition,  
a

ccompanied   by   an  
a

udible   signal   and   a  
m

essage   indicating  
t

he
 r
emaining
 d
riving
 ra

nge. The
  remaining   driving   range   is  b
etween   350   miles   (600   km)   and  
1500
  miles   (2400   km).Have
  the   AdBlue® additive tank topped up as soon a
s
 
possible:
 
go
 
to
  a   CITROËN   dealer   or   a   qualified  
w

orkshop,
 
or
 
carry   out   this   operation   yourself.
+ flashing
 a

ssociated
 w

ith
 t

he
 
SERVICE
 
warning
 l

amp,
 
accompanied
 
by
 a

n
 
audible
 
signal
 
and
 a

 
message
 
indicating
 t

he
 r

emaining
 d

riving
 ra

nge. The
 
remaining
 
driving
 
range
 
is
 
b

etween
 
0
 
and
 
350
 
miles
 
(600
 
km). You
 
must
 
top-up the  
Ad
Blue
® additive tank to avoid
a
breakdown :
 
go
 
to
 
a
 
CITROËN   dealer   or   a   qualified  
w

orkshop,
 
or
 
carry
 
out
 
this
 
operation   yourself.
flashing,
 
associated
 
w

ith the SERVICE
warning
 lam

p,
 a

ccompanied
 
by
 
an
 
a

udible
 
signal
 
and
 
a
 
m

essage
 
indicating
 
t

hat
 
starting
 
is
 
p

revented. The
 
AdBlue
® tank is empty: the s
tarting
 
inhibition   system   required  
b

y
 
legislation   prevents   starting   of   the  
e

ngine. To
  be   able   to   start   the   engine,   you   must   top-up the
AdBlue® additive tank: go to a CITROËN dealer or a q
ualified   workshop,   or   carry   out   this   operation   yourself.
It is essential
 

to   add   at   least   3.8   litres   of   AdBlue
® to
the
 
additive
 
tank.
For
 
topping-up
 
or
 
for
 
more
 
information
 
on
 
the
 
AdBlue
® additive, refer to the corresponding section.
Monitoring

Languages
Once the "Languages" menu has been selected, you   can   change   the   language   used   by   the s

creen   by   choosing   one   from   a   defined   list.
Units
Once the "Units" menu has been selected, you   can   change   the   units   of   the   following  
par

ameters:
-
 
t
emperature   (°C   or   °F),
-
 
f
uel   consumption   (l/100   km,   mpg   or   km/l).
Once
  the   fuel   consumption   units   have  
b

een   set   to   mpg,   the   information   in   the  
i

nstrument   panel   screen   on   speed   and  
d

istance   will   also   be   in   mph   and   miles.
As
  a   safety   measure,   configuration   by  
t

he   driver   of   the   multifunction   screen  
s

hould   only   be   done   when   stationary.
display settings
Once the "Display settings" menu has been selected, you   can   gain   access   to   the   following   settings:
- year,
- m onth,
-
 d

ay,
-
 h

o u r,
-
 m

inutes,
-
 
1
2   or   24   hour   mode.
F
 
O
nce   you   have   selected   a   setting,   press  
t

he "7" or " 8"
  buttons   to   change   its   value.
F

P
ress the " 5" or " 6" buttons to switch
respectively
  to   the   previous   or   next   setting.
F

P
ress the "OK"
 
button   to   save   the   change  
a

nd   return   to   the   normal   display   or   press  
t

he "Back"
 
button   to   cancel. Setting the date and time
F

P
ress the ME
n
U
 
button.
F
 
S
elect   "Display   settings"   using   the   "5 "
or
"6 "
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
S
elect   the   "Year"   function   using   the   "5 "
or
"6 "
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
C
hoose   the   desired   value,   using   the   "7 "
or
"8 "
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
R
epeat   the   procedure   to   set   the   "Month",  
"

Day",   "Hours",   and   "Minutes".

Menus
navigation
Navigation  is   available   depending   on  
t

he   county   of   sale   and/or   trim   level.
Refer
  to   the   "Audio   and   telematics"  
s

ection.
Radio Media
Refer
  to   the   "Audio   and   telematics"  
s

ection.
Settings
Allows
  configuration   of   the   display  
a

nd   the   system.
Refer
  to   the   corresponding   section.
Connected Services
These services are available
depending
  on   the   county   of   sale   and/
or
  trim   level.
Refer
  to   the   "Audio   and   telematics"  
s

ection. Telephone
Refer
  to   the   "Audio   and   telematics"  
s

ection.
dr

iving
Allows
 

access
 
to
 
the
 
trip
 
computer
 
and,
 d

epending   on   version,   the   adjustment
 o

f   settings   for   certain   functions.
Refer
  to   the   corresponding   section.1.
 V

olume   /   mute.
Refer
  to   the   "Audio   and   telematics"   section.
Press this button, then select the
desired
 m

enu.

51
"driving" menu
ButtonCorresponding function Comments
di

agnostic Recap
  of   current   alerts.
Under-inflation initialisation Reinitialisation
  of   tyre   pressures.
Refer
  to   the   "Safety"   section.
Vehicle settings Access
  to   other   functions   with   settings   that   can   be   adjusted.   The   functions   are   grouped  
t

ogether   under   three   tabs:
-
 
"dr
iving assistance"
-
 
"
Automatic   rear   wiper   in   reverse"   (Activation   of   rear   wiper   coupled   to   reverse   gear;   see  
t

he   " Visibility"   section).
-
 
"
Parking   sensors"   (Activation   of   rear   parking   sensors;   refer   to   the   "Driving"   section).
-
 
"
Auto   emergency   braking"   (Active   City   Brake;   refer   to   the   "Safety"   section).
-
 
"L

ighting"
-
 
"
Mood   lighting"   (refer   to   the   " Visibility"   section).
-
 
"
Guide-me-home   lighting"   (Automatic   guide   me   home   lighting;   refer   to   the   " Visibility"  
s

ection).
Select
  or   deselect   the   tabs   at   the   bottom   of   the   screen   to   display   the   functions   required.
The
  functions   accessible   in   this   menu   are   given   in   the   table   below.
Monitoring

"Settings" menu
The functions accessible in this menu are given in the table below.
Bu tton Corresponding function Comments
Audio settings Adjustment
  of   volume,   balance...
Turn off screen Turns
  off   the   display   in   the   the   touch   screen   tablet   (black   screen).
Pressing
  the   black   screen   (or   the   ME
n
U
 
button)   restores   the   display.
System Settings Choice
  of   units:
-
 
t
emperature   (°Celsius   or   °Fahrenheit),
-
 
d
istance   and   fuel   consumption   (l/100   km,   mpg   or   km/l).
Time/
d
a
te Setting
  the   date   and   time.
Languages Choice
  of   language   used   from   a   defined   list.
Screen settings Adjustment
  of   the   display   settings   (scrolling   of   text,   animations...)   and   the   screen   brightness.
Calculator Display
  the   calculator.
Calendar Display
  the   calendar.

69
In the event of unwanted opening of the window   on   closing   (for   example   in   the  
p

resence   of   frost):
F
 
p
ress   the   switch   beyond   the   point  
o

f   resistance   and   release   it;   the  
w

indow   opens   completely,
F
 
t
hen   immediately   pull   the   switch  
w

ithout   going   beyond   the   point   of  
r

esistance   until   the   window   closes  
f

ully,
F
 
c
ontinue   to   hold   the   switch   for  
a

pproximately   one   second   after   the  
w

indow   has   closed.
The safety anti-pinch function is not
active during these operations.
Safety anti-pinch
On the  driver's  s ide,  t he  o ne-touch  f ront  e lectric  w
indow   has   a   safety   anti-pinch   function.
When
  the   window   rises   and   meets   an   obstacle,  
i

t   stops   and   partially   lowers   again.
Reinitialisation
Always remove t he  k ey  f rom  t he  i gnition  w
hen   leaving   the   vehicle,   even   for   a  
s

hort   time.
In
  the   event   of   contact   during   operation  
o

f   the   windows,   reverse   the   movement  
o

f   the   window.   To   do   this,   press   the  
c

orresponding
 s
witch.
When
  the   driver   operates   the  
p

assenger   electric   window   switch,   they  
s

hould   ensure   that   no   one   is   preventing  
c

orrect   closing   of   the   window.
Be
  particularly   aware   of   children   when  
o

perating
 t
he
 w
indows.
In
 
the
 
event
 
of
 
a
 
malfunction
 
you
 
have
 
to
 r
einitialise the operation of the electric
windows:
F
 
r

elease
 
the
 
switch
 
and
 
pull
 
it
 
again
 
until
 
the
 
w

indow
 
closes
 
completely,
F
 
h

old
 
the
 
switch
 
for
 
approximately
 
o

ne second
 
after
 
closing,
F
 
p

ress
 
the
 
switch
 
to
 
lower
 
the
 
window
 
au

tomatically.
The safety anti-pinch function is not active
during these operations.
Access