indicator Citroen GRAND C4 PICASSO 2017 2.G Manual Online
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2017, Model line: GRAND C4 PICASSO, Model: Citroen GRAND C4 PICASSO 2017 2.GPages: 527, PDF Size: 12.91 MB
Page 223 of 527

221
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed02-2016
Cornering lighting
This system, if fitted to your vehicle, makes use 
of the beam from a front foglamp to illuminate 
the inside of a bend, when the main or dipped 
beam headlamps are on and the vehicle speed 
is below 25 mph (40 km/h) (urban driving, 
winding road, junctions, parking manoeuvres, 
e t c .) .with cornering lighting
without cornering lighting
Switching on
This system starts:
-
 w hen the corresponding direction indicator 
is switched on,
or
-
 
f
 rom a certain angle of rotation of the 
steering wheel.
Switching off
The system does not operate:
-  b elow a certain angle of rotation of the 
steering wheel,
-
 
a
 bove 25 mph (40 km/h),
-
 
w
 hen reverse gear is engaged.
The cornering lighting can be activated or 
deactivated in the Driving  menu.
F
 
Sel
 ect the " Vehicle settings " tab, then 
" Driving lighting " and "Directional 
headlamps ". 
5 
Lighting and visibility  
Page 232 of 527

230
C4-Picasso-II_en_Chap06_securite_ed02-2016
Hazard warning lamps
Visual warning with all of the direction 
indicators flashing to alert other road users to a 
vehicle breakdown, towing or accident.
F 
P
 ress this button, all of the direction 
indicators flash.
They can operate with the ignition off.
Automatic operation of 
hazard warning lamps
When braking in an emergency, depending on 
the deceleration, the hazard warning lamps 
come on automatically.
They switch off automatically the first time you 
accelerate.
F
 
Y
 ou can also switch them off by pressing 
the button.
Horn
F Press the central part of the steering  wheel. 
Safety  
Page 234 of 527

232
C4-Picasso-II_en_Chap06_securite_ed02-2016
Localised Assistance Call
If you purchased your vehicle outside 
the CITROËN dealer network, we 
invite you to have a dealer check the 
configuration of these services and, if 
desired, modified to suit your wishes. 
In a multi-lingual country, configuration 
is possible in the official national 
language of your choice.
A fault with the system does not 
prevent the vehicle being driven. For technical reasons and in particular 
to improve the quality of "Telematic 
services" services to customers, the 
manufacturer reserves the right to 
carry out updates to the vehicle's on-
board telematic system.
A voice message confirms that the call has 
been made**.
** 
 
D
epending on the geographical cover of 
"Localised Emergency Call", "Localised 
Assistance Call" and the official national 
language selected by the owner of the 
vehicle.
The list of countries covered and Telematic 
services is available from dealers or at  
www.citroen.co.uk.Operation of the system
When the ignition is switched 
on, the green LED comes on for 
3 seconds indicating that the 
system is operating correctly.
The red indicator lamp flashes 
then goes off: there is a system 
fault.
For all countries except Russia, Belarus 
and Kazakhstan.
The red indicator lamp is on continuously: 
replace the back-up battery.
For Russia, Belarus and Kazakhstan.
The red indicator lamp is on 
continuously: there is a system 
fault.
The red indicator lamp flashes: replace the 
back-up battery.
In either case, the emergency and assistance 
calls may not function.
Contact a qualified repairer as soon as 
possible. Press this button for more than 
2
  seconds to request assistance 
if the vehicle breaks down.
Pressing this button again immediately cancels 
the request.
The cancellation is confirmed by a voice 
message.
Geo-location
You can deactivate geo-location by 
simultaneously pressing the "Localised 
Emergency Call" and "Localised Assistance 
Call" buttons, followed by a press on "Localised 
Assistance Call" to confirm.
To reactivate geo-location, simultaneously 
press the "Localised Emergency Call" and 
"Localised Assistance Call" buttons again, 
followed by a press on "Localised Assistance 
Call" to confirm. 
Safety  
Page 241 of 527

239
C4-Picasso-II_en_Chap06_securite_ed02-2016
Seat belt not fastened and unfastened alerts
Rear seat belts not fastened  
alert
The instrument panel includes a seat belt not-
fastened warning lamp A as well as an indicator 
of the location of the non-fastened belts B .
When the system detects a non-fastened 
or unfastened seat belt, the warning lamp A 
comes on as well as the corresponding points 
in the indicator B .
On switching on the ignition, engine running 
or the vehicle at a speed of up to 12 mph 
(20 km/h), the warning lamp A as well as the 
corresponding points in the indicator B come 
on for about thirty seconds, if one or more rear 
passengers have not fastened their seat belt.
Seat belts unfastened alert
Front seat belts not fastened 
alert
On switching on the ignition, the warning 
lamp A  comes on, as well as the 
corresponding
  points in the indicator B , if the 
driver and/or front passenger have not fastened 
their seat belt. At speeds above 12 mph (20 km/h), these 
alerts flash, accompanied by an audible signal 
for two minutes. After this period, these alerts 
remain on fixed, while the front seat belts are 
not fastened.
On switching on the ignition, the warning 
lamp
 A
  remains on, as well as the 
corresponding points in the indicator B , if the 
driver and/or one or more passengers have not 
fastened their seat belt.
At speeds above 12 mph (20 km/h), these 
alerts flash, accompanied by a message and 
an audible signal for two minutes. After this 
period, these alerts remain on fixed, while the 
seat belts are not fastened.
6 
Safety  
Page 279 of 527

277
C4-Picasso-II_en_Chap07_info-pratiques_ed02-2016
Checking levels
Take care when working under the bonnet, as certain areas of the engine may be extremely hot (risk of burns) and the cooling fan could start at 
any time (even with the ignition off).
Engine oil level
The check is carried out either when 
the ignition is switched on using the 
oil level indicator in the instrument 
panel for vehicles so equipped, or 
using the dipstick.Checking using the dipstick
The location of the dipstick is shown in the 
corresponding underbonnet layout view.
F 
T
 ake the dipstick by its coloured grip and 
remove it completely.
F
 
W
 ipe the end of the dipstick using a clean 
non-fluffy cloth.
F
 
R
 efit the dipstick and push fully down, then 
pull it out again to make the visual check: 
the correct level is between the marks A 
and B .
It is normal to top-up the oil level between 
two services (or oil changes). CITROËN 
recommends that you check the level,  
and top-up if necessary, every 3 000 miles  
(5 000 kms). Check all of these levels regularly, in line with the manufacturer's service schedule. Top them up if necessary, unless other wise indicated.
If a level drops significantly, have the corresponding system checked by a CITROËN dealer or a qualified workshop.
To ensure that the reading is correct, 
your vehicle must be parked on a level 
sur face with the engine having been off 
for more than 30 minutes. A = MA X
B = MIN
If you find that the level is above the A mark or 
below the B mark, do not star t the engine .
-
 
I
 f the level is above the MAX mark (risk 
of damage to the engine), contact a 
CITROËN dealer or a qualified workshop.
-
 
I
 f the level is below the MIN mark, you 
must top-up the engine oil. 
7 
Practical information  
Page 280 of 527

278
C4-Picasso-II_en_Chap07_info-pratiques_ed02-2016
The brake fluid level should be close 
to the "MA X" mark. If it is not, check 
the brake pad wear.
Brake fluid level
Changing the fluid
Refer to the manufacturer's service schedule 
for details of the interval for this operation.
Fluid specification
The brake fluid must conform to the 
manufacturer's recommendations.
Topping-up the engine oil level
The location of the oil filler cap is shown in the 
corresponding underbonnet layout view.
F 
U
 nscrew the oil filler cap to reveal the filler 
aperture.
F
 
A
 dd oil in small quantities, avoiding any 
spills on engine components (risk of fire).
F
 
W
 ait a few minutes before checking the 
level again using the dipstick.
F
 
A
 dd more oil if necessary.
F
 
A
 fter checking the level, carefully refit the 
oil filler cap and the dipstick in its tube.
Engine oil change
Refer to the manufacturer's service schedule 
for details of the interval for this operation.
In order to maintain the reliability of the engine 
and emission control system, never use 
additives in the engine oil. After topping-up the oil, the check when 
switching on the ignition with the oil 
level indicator in the instrument panel 
is not valid during the 30 minutes after 
topping-up.
Oil grade
Before topping-up the oil or changing the oil, 
check that the oil is the correct grade for your 
engine and conforms to the manufacturer's 
recommendations.
reservoir low level is reached this warning lamp 
comes on in the instrument panel, accompanied 
by an audible signal and a message.
The warning lamp comes on when the ignition is 
switched on, or every time the stalk is operated, 
until the reservoir is refilled.
Next time you stop, refill the screenwash / 
headlamp wash reservoir.
Screenwash/headlamp 
wash level low
In the case of vehicles fitted with 
headlamp washers, when the fluid  
Practical information  
Page 284 of 527

282
C4-Picasso-II_en_Chap07_info-pratiques_ed02-2016
AdBlue® additive and SCR system
for BlueHDi Diesel engines
To assure respect for the environment and 
conformity with the new Euro 6 emissions 
standard, without adversely affecting the 
per formance or fuel consumption of Diesel 
engines, CITROËN has taken the decision to 
equip its vehicles with an effective system that 
associates SCR (Selective Catalytic Reduction) 
with a particle filter (FAP) for the treatment of 
exhaust gases.
SCR system
Using a fluid called AdBlue® containing urea, a 
catalytic converter turns up to 85% of nitrogen 
oxides (NOx) into nitrogen and water, which are 
harmless to health and the environment. The AdBlue
® is held in a special tank with a 
capacity of about 17 litres: this provides a driving 
range of about 12 500 miles (20 000 km). An 
alert is triggered automatically to warn you when 
the reserve level is reached: you can then drive 
about 1 500 miles (2 400 km) before the tank is 
e m pt y.
During each scheduled service of your vehicle 
by a CITROËN dealer or a qualified workshop, 
the AdBlue
® tank is refilled in order to allow 
normal operation of the SCR system.
If the estimated mileage of your vehicle 
between two services is greater than  
12 500 miles (20 000 km), it will be necessary 
to top-up the AdBlue
®. Once the AdBlue
® tank is empty, a 
s
ystem required by regulations prevents 
starting of the engine.
If the SCR
 
system is faulty, the level 
of emissions from your vehicle will no 
longer meet the Euro 6 standard: your 
vehicle becomes polluting.
In the event of a confirmed fault 
with the SCR system, you must go 
to a CITROËN dealer or a qualified 
workshop as soon as possible: after 
a running distance of 650 miles 
(1
 
100 km), a system will be triggered 
automatically to prevent engine starting.
In either case, a range indicator gives 
you the distance you can travel before 
the vehicle is immobilised. 
Practical information  
Page 287 of 527

285
C4-Picasso-II_en_Chap07_info-pratiques_ed02-2016
Important: if your vehicle's AdBlue® 
tank is completely empty - which is 
confirmed by the alert messages and 
the impossibility of starting the engine, 
you must add at least 3.8 litres of fluid. Important: 
when topping-up after 
running out of AdBlue®, signalled 
by the message "Top-up AdBlue: 
Starting prevented", you must wait 
for approximately 5 minutes before 
switching on the ignition, without 
opening the driver's door, unlocking 
the vehicle, placing the key of the 
"Keyless Entr y and Star ting" system 
inside the vehicle or inser ting the 
electronic key in the reader.
Switch on the ignition, wait for 
10
 
seconds, then start the engine.
If any fluid is spilt or splashed, wash 
immediately with cold water or wipe with 
a damp cloth.
If the fluid has crystallised, clean it off 
using a sponge and hot water.
F
 
A
fter emptying the bottle, wipe away any 
spillage around the tank filler using a damp 
cloth. F
 
R
efit the blue cap to the tank and turn it a 
6th of a turn clockwise, to its stop.
F
 R
efit the black cap and turn it a quarter of 
a turn clockwise without pressing. Ensure 
that the indicator on the cap lines up with 
the indicator on the support.
F
 
D
epending on equipment, return the spare 
wheel and/or the storage box to the bottom 
of the boot.
F
 
R
efit the boot carpet and close the tailgate.
Do not dispose of AdBlue
® bottles or 
containers in the household waste.
Place them in a container provided 
for this purpose or take them to your 
dealer. 
7 
Practical information  
Page 306 of 527

304
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
Changing a bulb
For H7 type bulbs with lugs... take care 
to observe their correct installation 
so as to ensure the best lighting 
performance.
Risk of electrocution
Xenon bulbs (D5S-25W) must be 
replaced by a CITROËN dealer or a 
qualified workshop.
Front lamps
1. Directional dipped beam headlamps  (D5S-25W).
2.
 M
ain beam headlamps (H7-55W).
3.
 D
aytime running lamps / sidelamps
 (
6 light emitting diodes - LEDs).
4.
 D
irection indicators
 (
6 light emittng diodes - LEDs).
5.
 F
ront foglamps (H11-55W). 1. D
ipped beam headlamps (H7-55W).
2. M ain beam headlamps (H7-55W).
3.
 D
aytime running lamps/sidelamps
 (
4 light emitting diodes - LEDs).
4.
 D
irection indicators (PW Y24W).
5.
 F
oglamps (H11-55W).In some weather conditions (e.g. low 
temperature or humidity), the presence 
of misting on the internal sur face of the 
glass of the headlamps and rear lamps 
is normal; it disappears after the lamps 
have been on for a few minutes.
Light- emitting diodes - LEDs
For replacement, contact a CITROËN dealer or 
qualified workshop.
Model with xenon headlamps Model with halogen headlamps 
In the event of a breakdown  
Page 309 of 527

307
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
The direction indicator bulb is located below 
the front lamp.
F 
T
 urn the bulb holder a quarter turn anti-
clockwise.
F
 
R
 emove the bulb holder.
F
 
C
 hange the failed bulb.
For reassembly, carry out these operations in 
reverse order.
Direction indicators Front foglamps
F Unclip the finisher by pulling at the top.
F
 R emove the two screws to remove the unit.
F
 
T
 urn the bulb holder a quarter turn.
F
 
R
 emove the bulb holder.
F
 
C
 hange the failed bulb.
For reassembly, carry out these operations in 
reverse order, pressing on the finisher to refit it.
Faster flashing of a direction indicator 
warning lamp (left or right) indicates a 
failed bulb on that side.
Direction indicators  
(light- emitting diodes - LED)
For the replacement of this type of lamp, 
contact a CITROËN dealer or a qualified 
workshop. 
8 
In the event of a breakdown