button Citroen GRAND C4 PICASSO RHD 2016 2.G Owner's Guide

59
Lost electronic key
Visit a CITROËN dealer with the vehicle's registration certificate, your personal identification documents and if possible the key code label.
T he   CITROËN   dealer   will   be   able   to   retrieve   the   key   code   and   the   transponder   code   required   to   order   a   new   key.
Electronic key
The electronic key is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle, without you   being   aware   of   it.
Do
  not   repeatedly   press   the   buttons   of   your   electronic   key   out   of   range   and   out   of   sight   of   your   vehicle.   You   run   the   risk   of   stopping   it   from  
w

orking   and   the   remote   control   would   have   to   be   reinitialised.
The
  electronic   key   cannot   operate   as   a   remote   control   when   it   is   in   the   reader   or   even   when   the   ignition   is   switched   on.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emergency services more difficult in an emergency.
A s   a   safety   precaution   (with   children   on   board),   take   the   electronic   key   with   you   when   you   leave   the   vehicle,   even   for   a   short   time.
Electrical interference
The electronic key may not operate if close to certain electronic devices: telephone, laptop computer, strong magnetic fields, ...
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could cause malfunctions.
D on't   forget   to   turn   the   wheel   to   lock   the   steering   column.
When purchasing a second-hand vehicle
Have all of the keys in your possession paired by a CITROËN dealer, to ensure that only your keys allow your vehicle to be unlocked and started.
2
Access

60
Manual central locking
Central locking
F Press this button to operate the central locking   of   the   vehicle   (doors   and   boot)   from  
i

nside   the   vehicle.
F
 
P
ressing   the   button   again   unlocks   the  
v

ehicle
 c
ompletely.
Automatic central locking
of doors (anti-intrusion
security)
The doors and boot lock automatically when driving,   as   soon   as   the   speed   exceeds   6   mph  
(

10   km/h).
To
  activate   or   deactivate   this   function   (activated  
b

y   default):
F
 
w
ith   the   ignition   on,   press   this   button   until   a  
m

essage   appears   in   the   instrument   panel.
When locking / deadlocking from the
outside
If
 
the
 
vehicle
 
is
 
locked
 
or
 
deadlocked
 
f

rom
 
the
 
outside,
 
the
 
button
 
is
 
not
 
a

ctive.
F
 
A

fter
 
normal
 
locking,
 
pull
 
one
 
of
 t

he
 
interior
 
door
 
handles
 
to
 
unlock
 t

he vehicle.
F
 
A

fter
 
deadlocking,
 
you
 
have
 
to
 
use
 t

he
 
remote
 
control,
 
the
 
Keyless
 
Entry
 a

nd
 
Starting
 
system
 
or
 
the
 
integral
 k

ey
 
to
 
unlock
 
the
 
vehicle. If
  one   of   the   doors   or   the   boot   is  
o

pen,   automatic   central   locking   does  
n

ot   complete:   the   sound   of   the   locks  
r

ebounding   can   be   heard.
Transporting long or voluminous
objects
If
  you   want   to   drive   with   the   boot   open  
b

ut   the   vehicle's   side   doors   locked,  
p

ress   the   central   locking   control   button  
t

o   lock   the   doors.
Driving
  with   the   doors   locked   may   make  
a

ccess   to   the   passenger   compartment  
b

y   the   emergency   services   more  
d

ifficult   in   an   emergency.
Access

63
Boot
Opening the tailgate
With the electronic key /
remote controlWith the tailgate opening
control
F With  the   vehicle   unlocked   or   with   the  e
lectronic   key   of   the   Keyless   Entry   and  
S

tarting   system   in   the   zone   covered,   press  
t

he   tailgate   control   A.
F
 
Ra
ise
 t
he
 t
ailgate.
F
 
M

ake
 
a
 
long
 
press
 
on
 
this
 
button
 
t

o
 
release
 
the
 
tailgate.
 
If
 
the
 
v

ehicle
 
was
 
locked,
 
this
 
action
 
f

irst
 
unlocks
 
the
 
vehicle.
F
 
Ra

ise
 t

he
 t

ailgate.
When
 
selective
 
unlocking
 
is
 
activated,
 
t

he
 
electronic
 
key
 
must
 
be
 
close
 
to
 
the
 r
ear
 
of
 
the
 
vehicle.
Closing the tailgate
F Lower
  the   tailgate   using   the   interior   grips.
F  R elease   the   grips   and   press   down   on   the  
o

utside   of   the   tailgate   to   close   it.
If
  the   tailgate   is   not   properly   closed:
The
 
tailgate
 
is
 
not
 
designed
 
to
 
take
 
a
 
b

icycle
 
carrier. -
 
e
ngine running,
  this   warning  
l

amp   and   a   message   appear   in  
t

he   instrument   panel   (type   1)   for  
a

  few   seconds,
-
 
v
ehicle running
 
(speed   above  
6

  mph   (10   km/h)),   this   warning  
l

amp   and   a   message   appear  
i

n   the   instrument   panel   (type   1  
a

nd   type   2)   for   a   few   seconds,  
a

ccompanied   by   an   audible  
s

ignal.
2
Access

65
or
Opening the tailgate with the
electronic key / remote control (A)
Opening the tailgate with the
"Keyless Entry and Starting"
system "B"
Opening the tailgate
F Make  a   long   press   on   the   remote  c
ontrol   button.
F

P

ress button B   on   the   tailgate,   with   the  
e

lectronic   key   in   the   zone   covered.
When
  selective   locking   is   activated,   the  
e

lectronic   key   must   be   near   the   rear   of  
t

he
  vehicle.
By
 
default,   the   tailgate   opens  
c

ompletely   or   alternatively   to   the  
m

emorised
 p
osition.
F
 
A

fter
 
complete   unlocking   of   the   vehicle,  
p

ress control B   on   the   tailgate.
The
 
instruction   is   confirmed   by   an   audible  
s

ignal.
Motorised closing
There are two possibilities:
F  P ress   and   release   the   exterior   control   B.
or
The
  motorised   tailgate   has   an   anti-
pinch
  system   that   interrupts   closing   if   it  
e

ncounters   an   obstacle.
F
 
P
ress   and   then   release   button   C.
There
 
are
 
several
 
ways
 
of
 
operating
 
the
 m
otorised t
ailgate:
-
 
u

sing
 
the
 
Keyless
 
Entry
 
and
 
Starting
 
e

lectronic
 
key
 
(A) ,
-
 
u

sing
 
the
 
exterior
 
control
 
on
 
the
 
t

ailgate  (B),
-
 
u

sing
 
the
 
interior
 
control
 
on
 
the
 
tailgate
 
(C) ,
-
 
b

y
 
a
 
movement
 
of
 
your
 
foot,
 
if
 
your
 
vehicle
 
h

as
 
the
 
hands-free
 
tailgate
 
access
 
f

unction.
Motorised opening
For more information on Hands-free tailgate
a ccess ,
  refer   to   the   corresponding   section.
Operation
Operation of the tailgate can be interrupted   at   any   time:
-
 
b
y   pressing  
o

ne of these
two


buttons,
or
-
 
b
y   pressing   the   exterior   control   B.
After interruption of an operation,
another press on one of the controls
resumes
  the   movement,   with   the  
e

xception   of   a   press   on   the   remote  
c

ontrol button, which only allows
opening.
2
Access

66
Memorising an
opening position
Where height is restricted (garage with a low c
eiling, ...)   it   is   possible   to   limit   and   memorise  
t

he   opening   angle   of   the   motorised   tailgate.
This
  memorisation   is   done   as   follows:
-
 
o
pen   the   tailgate   to   the   desired   position,
-
 
p
ress   button C   or   the   exterior   control   B for
more
  than   3   seconds.
Memorisation
  of   the   maximum   opening   position  
o

f   the   tailgate   is   confirmed   by   an   audible   signal.
To
  cancel   the   memorised   position:
-
 
s
top   the   tailgate   in   an   intermediate  
p

osition,
-
 
p
ress   button C   or   the   exterior   control   B for
more
  than   3   seconds.
Cancellation
  of   the   memorised   position   is  
c

onfirmed   by   an   audible   signal.
Manual operation
The motorised tailgate can be opened and closed   manually,   even   if   motorised   operation   is  
a

ctivated.
However,
  any   manual   intervention   must   be  
d

one   with   the   tailgate   stopped.
Repeated
 
opening
 
and
 
closing
 
of
 
the
 t
ailgate
 
can
 
cause
 
overheating
 
of
 
its
 e
lectric
 
motor,
 
after
 
which
 
opening
 
and
 
c

losing
 
will
 
not
 
be
 
possible.
Allow
 
10
 
minutes
 
for
 
the
 
motor
 
to
 
cool
 
d

own
 
before
 
operating
 
the
 
tailgate
 
ag

ain.
If you are not able to wait, operate it
manually.
Detection of obstacles
Should an obstacle (person or object) be e ncountered,   the   anti-pinch   system   interrupts  
t

he   closing   movement   and   raises   the   tailgate   a  
f

ew   centimetres   to   clear   the   obstacle. When
  opening   and   closing   a   motorised   tailgate  
m

anually,   there   is   no   assistance   from   gas-filled  
s

truts.   Resistance   to   opening   and   closing   is  
t

herefore   entirely   normal.
Access

70
For all work on the alarm system, contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
AlarmSystem which protects and provides a deterrent against theft and break-ins. It provides the following types of monitoring:
- Exterior perimeter
The system checks for opening of the vehicle.
T he   alarm   is   triggered   if   anyone   tries   to   open   a  
d

oor,   the   boot   or   the   bonnet...
- Interior volumetric
The system checks for any variation in the volume   in   the   passenger   compartment.
The
  alarm   is   triggered   if   anyone   breaks   a  
w

indow,   enters   the   passenger   compartment   or  
m

oves   inside   the   vehicle.
Self-protection function
The system checks for the disconnection   of   any   of   its   components.
The
  alarm   is   triggered   if   the   battery,  
t

he   button   or   the   siren   wiring   is  
d

isconnected
 o
r
 d
amaged.
Locking the vehicle with full
alarm system
Activation
If an opening (door, boot, bonnet...) is not closed   fully,   the   vehicle   is   not   locked   but   the  
e

xterior   perimeter   monitoring   will   be   activated  
a

fter   a   delay   of   45   seconds,   at   the   same   time  
a

s   the   interior   volumetric   monitoring.
F
 
L
ock   the   vehicle   using   the  
r

emote   control.
F
Switch off the ignition and get out of the vehicle.
or
F
 L ock   the   vehicle   using   the   "Keyless   Entry  
a

nd   Starting"   system.
The
  monitoring   system   is   active:   the   indicator  
l

amp   in   the   button   flashes   once   per   second  
a

nd   the   direction   indicators   come   on   for   about  
2

  seconds.
After
  a   command   to   lock   the   vehicle   using  
t

he   remote   control   or   the   Keyless   Entry  
a

nd   Starting   system,   the   exterior   perimeter  
m

onitoring   is   activated   after   a   delay   of  
5 s

econds,   the   interior   volumetric   monitoring  
a

fter   45   seconds.
Access

71
OFF
Locking the vehicle with exterior perimeter
monitoring only
Deactivate the interior volumetric monitoring to   avoid   unwanted   triggering   of   the   alarm   in  
c

ertain   cases   such   as:
-
 
l
eaving   a   window   partially   open,
-
 
w
ashing   your   vehicle,
-
 
c
hanging   a   wheel,
-
 
t
owing   your   vehicle,
-
 
t
ransport   on   a   ferry.
Deactivating the volumetric
monitoring
F Switch  off   the   ignition   and   within  t
en   seconds   press   this   button  
u

ntil   its   indicator   lamp   is   on   fixed.
F
 
G

et
 
out   of   the   vehicle.
F
 
I

mmediately   lock   the   vehicle   using   the  
r

emote   control   or   the   "Keyless   Entry   and  
S

tarting"   system.
Only
 
the
 
exterior   perimeter   protection   system   is  
a

ctive:
 
the   indicator   lamp   in   the   button   flashes  
o

nce
 
per
 
second.
To
 
be
 
effective,   this   deactivation   must   be   done  
e

very
 
time   the   ignition   is   switched   off.
In
 
the
 
case
 
of
 
automatic
 
locking
 
of
 
the
 
v

ehicle
 
(which
 
occurs
 
after
 
a
 
period
 
o

f
 
30
 
seconds
 
if
 
a
 
door
 
or
 
the
 
boot
 
is
 
n

ot
 
opened),
 
the
 
monitoring
 
system
 
is
 
r

eactivated
 a

utomatically.
Deactivation
F Press   one   of   the   unlocking   buttons   on   the  r
emote   control:
short press
long
  press
or
F
 
U
nlock   the   vehicle   using   the   "Keyless   Entry  
a

nd   Starting"   system.
The
  monitoring   system   is   deactivated:   the  
i

ndicator   lamp   in   the   button   is   off   and   the  
d

irection   indicators   flash   for   about   2   seconds.
Reactivating the interior
volumetric monitoring
F Deactivate  the   exterior   perimeter  m
onitoring   by   unlocking   the   vehicle   using  
t

he   remote   control   or   the   Keyless   Entry   and  
S

tarting   system.
The
  indicator   lamp   in   the   button   goes   off.
F
 
R
eactivate   the   full   alarm   system   by   locking  
t

he   vehicle   using   the   remote   control   or   the  
"

Keyless   Entry   and   Starting"   system.
The
  indicator   lamp   in   the   button   flashes   once  
p

er   second   again.
2
Access

72
Triggering of the alarm
This is indicated by sounding of the siren and   flashing   of   the   direction   indicators   for  
t

hirty seconds.
The
  monitoring   functions   remain   active   until  
t

he   alarm   has   been   triggered   eleven   times   in  
s

uccession.
When
  the   vehicle   is   unlocked   using   the   remote  
c

ontrol   or   the   Keyless   Entry   and   Starting  
s

ystem,   rapid   flashing   of   the   indicator   lamp  
i

n   the   button   informs   you   that   the   alarm   was  
t

riggered   during   your   absence.   When   the  
i

gnition   is   switched   on,   this   flashing   stops  
i

mmediately.
Failure of the remote control
To deactivate the monitoring functions:
F  
U
nlock   the   vehicle   using   the   key   (integral  
w

ith   the   remote   control)   in   the   driver's   door  
l

ock.
F
 
O
pen   the   door;   the   alarm   is   triggered.
F
 
S
witch   on   the   ignition;   the   alarm   stops.   The  
i

ndicator   lamp   in   the   button   goes   off.
Locking the vehicle without
activating the alarm
F Lock  or   deadlock   the   vehicle   using   the   key  (
integral   with   the   remote   control)   in   the  
d

river's   door   lock.
Operating fault
When the ignition is switched on, fixed illumination   of   the   indicator   lamp   in   the   button  
i

ndicates   a   fault   in   the   system.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Automatic activation*
2 minutes after the last door or the boot is closed,   the   system   is   activated   automatically.
F
 
T
o   avoid   triggering   the   alarm   on   entering  
t

he   vehicle,   first   press   the   unlocking   button  
o

n   the   remote   control   or   unlock   the   vehicle  
u

sing   the   Keyless   Entry   and   Starting  
s

ystem.
*
  Depending   on   the   country   of   sale.
Access

74
Reinitialising the electric
windows
Deactivating the rear
controls for the rear
windows
In the event of contact during operation o
f   the   windows,   you   must   reverse   the  
m

ovement   of   the   window.   To   do   this,  
p

ress   the   switch   concerned.
When
  operating   the   passenger   electric  
w

indow   switches,   the   driver   must  
e

nsure   that   nothing   is   preventing  
c

orrect   closing   of   the   windows.
The
  driver   must   ensure   that   the  
p

assengers   use   the   electric   windows  
c

o r r e c t l y.
Be
  particularly   aware   of   children   when  
o

perating
 t
he
 w
indows.
Be
  aware   of   passengers   or   other  
p

ersons   present   when   closing   the  
w

indows   using   the   electronic   key   or   the  
"

Keyless   Entry   and   Starting"   system.
Following
 
reconnection
 
of
 
the
 
battery,
 
the
 s
afety
 
anti-pinch
 
function
 
must
 
be
 
reinitialised.
The
 
safety
 
anti-pinch
 
function
 
is
 
not
 
active
 
d

uring
 
these
 
operations.
For
 
the
 
safety
 
of
 
your
 
children,
 
press
 
s

witch 5 to prevent operation of the
rear
 
windows
 
irrespective
 
of
 
their
 
p

ositions.
The
 
indicator
 
lamp
 
in
 
the
 
button
 
comes
 
on,
 
a

ccompanied
 
by
 
a
 
message
 
confirming
 
a

ctivation.
 
It
 
remains
 
on,
 
as
 
long
 
as
 
the
 
child
 
l

ock
 
is
 
off
 
(deactivated).
Use
 
of
 
the
 
rear
 
electric
 
windows
 
from
 
the
 
d

river's
 
controls
 
remains
 
possible. For
 
each
 
window:
-
 
l

ower
 
the
 
window
 
completely,
 
then
 
raise
 
it,
 
i

t
 
will
 
rise
 
in
 
steps
 
of
 
a
 
few
 
centimetres
 
with
 
e

ach
 
action.
 
Repeat
 
the
 
operation
 
until
 
the
 
w

indow
 
closes
 
completely,
-
 
c

ontinue
 
to
 
pull
 
the
 
switch
 
for
 
at
 
least
 
o

ne second
 
after
 
reaching
 
this
 
position,
 
w

indow
 c

losed.
Access

78
System which registers the electrical settings of   the   driver's   seat   and   door   mirrors.   It   enables  
y

ou   to   store   and   recall   two   positions   using   the  
b

uttons   on   the   side   of   the   driver's   seat.
Storing driving positions
Storing a position
Using buttons M / 1 / 2
F Switch  on   the   ignition.
F  A djust   your   seat   and   the   door   mirrors.
F

P
ress button M , then press button 1 or 2
within
  four   seconds.
An
  audible   signal   indicates   that  
t
he   position   has  
b

een   stored.
Storing
  a   new   position   cancels   the   previous  
p

osition.
Recalling a stored position
Ignition on or engine running
F Press button 1 or 2 to recall the corresponding p osition.
An
  audible   signal   confirms   that   adjustment   is  
c

omplete.
You
  can   interrupt   the   current   movement   by  
p

ressing   button   M, 1 or 2
  or   by   using   one   of   the  
s

eat   controls.
A
  stored   position   cannot   be   recalled   while  
d

riving.
Recalling
  stored   positions   is   deactivated  
4

5 seconds   after   switching   off   the   ignition.
Ease of use and comfort