belt Citroen JUMPY 2016 2.G Owner's Manual

.
.
Jumpy _en_Chap00a_sommaire_ed01-2016
Over view
Instrument panels 14
Indicator and warning lamps 1 7
Engine coolant temperature

3
1
Distance recorders

3
8
Lighting dimmer

3
9
Trip computer

4
0
Touch screen

4
3
Setting the date and time

4
6
Key
47
K

ey, remote control
4
7
"Keyless Entry and Starting"

5
5
Locking / unlocking from inside

7
2
Front doors

7
4
Manual sliding side door(s)

7
5
Electric sliding side door(s)

7
8
Hands-free sliding side door(s)

87
S

ide-hinged rear doors
9
1
Tailgate
9

4
Alarm
9

5
Electric windows

9
8Steering wheel adjustment

9
9
Front seats
9
9
2-seat front bench seat
1
04
Moduwork
1
06
Fixed one-piece bench seat
1
10
Fixed rear seat and bench seat
1
13
Fixed crew cab 1 17
Interior fittings 1 19
Loading area fittings

1
22
Seating area fittings

1
23
Heating / Ventilation

1
25
Manual air conditioning
1

26
Dual-zone automatic air conditioning

1
28
Front demist - defrost

1
32
Door mirrors demist - defrost

1
33
Rear screen demist - defrost

1
34
Rear Heating - Air Conditioning

1
37
Programmable Heating / Ventilation

1
38
Courtesy lamp(s)

1
41Mir ror s
14

3
Lighting control stalk
1
46
Daytime running lamps
1
49
Automatic illumination of headlamps
1
49
Automatic headlamp dipping
1
53
Manual headlamp beam height adjustment 1 55
Wiper control stalk 1 56
Automatic rain sensitive wipers

1
57
Hazard warning lamps

1
60
Emergency or assistance call

1
60
Horn


161
Electronic stability control (ESC)

1
61
Grip control

1
64
Seat belts
1

66
Airbags
1

70
Child seats

1
74
Deactivating the passenger's front
airbag
1

77
ISOFIX mountings

1
86
Manual child lock

1
94
Electric child lock

1
94
Child lock on rear windows

1
95
Eco-driving
Instruments
Access Ease of use and comfort
Lighting and visibility
Safety
Labels 11
Contents

8
Jumpy _en_Chap00b_vue-ensemble_ed01-2016
Rear courtesy lamps 141
Changing courtesy lamp bulbs 3 12 Interior rear view mirror

1
45
Front courtesy lamp
1
41
Changing courtesy lamp bulbs
3
12
Interior fittings
1
19 -122
-
c
up/can holder
- mats
-
s
un visors
-
g
love box
-
s
torage box
-
u
pper storage box
-
a
ccessory socket, USB port, JACK
auxiliary socket
Tool box
2
87-289
ISOFIX mountings (fixed crew cab)

1
86 -189
2-seat front bench seat

1
04-105
Heated bench seat
1
05
Moduwork 10 6 -109
Work table 1 09
Child seats

1
74-183
Temporary puncture repair kit

2
87-289, 290 -295
Spare wheel, jack, changing a wheel

2
87-289, 296 -302
Loading area fittings

1
22-123
-
la

shing rings
-

l
oading area bulkhead
Accessories
2

71-273
Fixed crew cab

1
17-118 Airbags, front, lateral

1
70 -173
Deactivating the passenger front airbag
1
72, 177
12 V accessory socket
1
21
USB port
1
22
JACK auxiliary socket
1
22
Front seats
9
9 -103
-
m
anual adjustments
-
e
lectric adjustments
-
h
ead restraints
-
hea
ted seats
Seat belts
1
66 -168
Interior
Over view

9
Jumpy _en_Chap00b_vue-ensemble_ed01-2016
Interior fittings 119 -122
- c up/can holder
-
mats
-

s
un visors
-

g
love box
-

s
torage box
-

u
pper storage box
-

a
ccessory socket, USB port, JACK
auxiliary socket
Tool box

2
87-289
Child seats

1
74-181, 184-185
ISOFIXmountings

1
86 -187, 190 -192
Rear side windows

1
24, 195
Fixed one-piece bench seat
1

10-112
Rear seat and fixed bench seat

1
13 -115
Seat labels
1

16
2-seat front bench seat

1
04-105
Heated bench seat

1
05
Rear heating - air conditioning

1
37
Temporary puncture repair kit

2
87-289, 290 -295
Spare wheel, jack, changing a wheel, tools

2
87-289, 296 -302
Seating area fittings

1
23 -124
-

h
igh load retaining net
-
r

ear windows
Accessories
2

71-272
Rear courtesy lamp

1
42
Changing courtesy lamp bulbs

3
12Rear view mirror
1 45
Front courtesy lamp

1
42
Changing courtesy lamp bulbs

3
12Front, side airbags

1
70 -173
Deactivating the passenger front airbag

1
72, 177
12 V accessory sockets

1
21
USB port

1
22
JACK auxiliary socket

1
22
Front seats, adjustments, head restraint
9

9-103
-
m

anual adjustments
-

e
lectric adjustments
-

t
able positon
-

h
ead restraints
-
hea

ted seats
Seat belts

1
66 -168
Fixed one-piece bench seat
1

10-112
Rear seat and fixed bench seat

1
13 -115
Seat labels
1

16
Interior
.
Over view

19
Jumpy _en_Chap01_instruments-de-bord_ed01-2016
Warning / indicator lampStateCause Action / Observations
Seat belt(s)
not fastened /
unfastened fixed
or flashing
accompanied by an
audible signal. A seat belt has not been fastened or
has been unfastened.
Pull the strap then insert the tongue in the buckle.
* Depending on the country of sale. Battery charge
*fixed. The battery charging circuit has a
fault (dirty or loose terminals, slack or
cut alternator belt, ...). The warning lamp should go off when the engine is
started.
If it does not go off, contact a CITROËN dealer or a
qualified workshop.
Engine oil
pressure fixed.
There is a fault with the engine
lubrication system. You must stop as soon it is safe to do so.
Park, switch off the ignition and contact a CITROËN
dealer or a qualified workshop.
or Maximum
coolant
temperature
fixed with the needle
in the red zone.
The temperature of the cooling
system is too high. Stop as soon as it is safe to do so.
Wait until the engine has cooled down before topping-
up the level, if necessary.
If the problem persists, contact a CITROËN dealer or
a qualified workshop.
fixed (only with the
LCD instrument
panel).
1
Instruments

24
Warning / indicator lampStateCause Action / Observations
Passenger's
front airbag fixed in the seat belt
and front passenger's
airbag warning lamps
display. The control switch, located at the
passenger's end of the dashboard, is
set to the "OFF"
position.
The passenger's front airbag is
deactivated.
You can install a rear ward facing
child seat, unless there is a fault with
the airbags (airbag warning lamp on). Turn the control switch to the "ON"
position to activate
the passenger's front airbag; in this case, you must
not install a child seat in the rear ward facing position
on this seat.
Airbags
on temporarily. This warning lamp comes on for a
few seconds when you turn on the
ignition, then goes off. This warning lamp should go off when the engine is
started.
If it does not go off, contact a CITROËN dealer or a
qualified workshop.
fixed. One of the airbag or seat belt
pretensioner systems has a fault. Have them checked by a CITROËN dealer or a
qualified workshop.
Passenger 's
airbag system fixed.
The control switch, located at the
passenger's end of the dashboard, is
at the "ON" position.
The passenger's front airbag is
activated.
In this case, do not install a rear ward
facing child seat on the front
passenger seat. Turn the control switch to the "
OFF" position to
deactivate the passenger's front airbag.
You can install a rear ward facing child seat, unless
there is a fault with the airbags (airbag warning
lamp
on).
Instruments

99
Jumpy _en_Chap03_ergonomie-et-confort_ed01-2016
Steering wheel adjustment
F When stationary, lower the control lever
to release the steering wheel adjustment
mechanism.
F

A
djust the height and reach to suit your
driving position.
F

P
ull the control lever to lock the steering
wheel adjustment mechanism.
As a safety precaution, these
operations should only be carried out
while the vehicle is stationary.
Front seats with manual adjustments
F Raise the control and slide the seat for wards or backwards. F
I f fitted to your vehicle, pull the control
upwards to raise or push it downwards to
lower, as many times as required to obtain
the position required.
Forwards-backwards Height
As a safety measure, seat adjustments should only be carried out when stationary.
Before moving the seat backwards, ensure that there is nothing that might prevent the full
travel of the seat, so as to avoid the risk of jamming the seat caused by the presence of
objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement
immediately. For more information on the Seat belts ,
refer to the corresponding section.
3
Ease of use and comfort

102
Jumpy _en_Chap03_ergonomie-et-confort_ed01-2016
Electric front seat
Forwards-backwardsBackrest angleHeight
To avoid discharging the battery, carry out
these adjustments with the engine running.
For more information on the Seat belts
,
refer to the corresponding section.
F

P

ush the control for wards or rear wards to
slide the seat. F

T

ilt the control for wards or rear wards to
adjust the angle of the seat backrest. F

T

ilt the control upwards or downwards to
obtain the desired height.
Before moving the seat backwards, ensure that there is nothing that might prevent the full
travel of the seat, so as to avoid the risk of jamming the seat caused by the presence of
objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement
immediately.
Ease of use and comfort

104
Jumpy _en_Chap03_ergonomie-et-confort_ed01-2016
Head restraint height
adjustment
F To raise the head restraint, pull it upwards.
F T o remove the head restraint, press the
lug
A and pull the head restraint upwards.
F

T
o put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the seat
back.
F

T
o lower the head restraint, press the lug A
and the head restraint at the same time. The head restraint rods have notches
which prevent the head restraint
lowering; this is a safety device in case
of impact.
The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
2-seat front bench seat
If fitted to your vehicle, this is fixed and has a seat belt on the backrest for the seat alongside the
driver.
For more information on the Seat belts,
refer to the corresponding section.
Ease of use and comfort

110
Jumpy _en_Chap03_ergonomie-et-confort_ed01-2016
Fixed one-piece bench seat
F To raise a head restraint, pull it up until it engages in its notches.
F

T
o remove the head restraint, press the
lug
A and pull the head restraint upward.
F

T
o put it back in place, engage the head
restraint rods in the apertures keeping
them in line with the seat backrest.
F

T
o lower it, press on the lug A and on the
head restraint at the same time. F

P
lace the head restraints in the low position.
The different items of equipment and
adjustments described hereafter vary
according to the version and the configuration
of your vehicle.
The bench seat includes a one-piece backrest
which may be fixed or folding (table position).
Angled head restraints Folding the seat backrest to
the table position
For more information on the Seat belts ,
refer to the corresponding section. F

F
rom the front, raise the handle to release
the seat backrest.
F
F
rom the rear, lower the handle to release
the seat backrest.
F F old the backrest onto the seat cushion.
F

T
o return the backrest to its normal
position, raise the handle and pull the
backrest up.
Ease of use and comfort

113
Jumpy _en_Chap03_ergonomie-et-confort_ed01-2016
Fixed rear seat and bench seat
The seat has a backrest that may be fixed or
folding (table position).
The bench seat has a one-piece backrest that
may be fixed or foldable (table position).F

T
o raise a head restraint, pull it up until it
engages in its notches.
F
T
o remove the head restraint, press the
lug A and pull the head restraint upward.
F T o put it back in place, engage the head
restraint rods in the apertures keeping
them in line with the seat backrest.
F

T
o lower it, press on the lug A and on the
head restraint at the same time.
Angled head restraints
F Put the head restraints into the low position.
Folding the backrest to the
table position
For more information on the Seat belts ,
refer to the corresponding section. F

F
rom the front, raise the handle to release
the backrest.
F F rom the rear, lower the lever to release
the backrest.
The different levels of equipment and adjustments described hereafter vary according to the version and the configuration of your vehicle.
3
Ease of use and comfort