ESP Citroen XSARA 2005 1.G Repair Manual

Downloaded from www.Manualslib.com manuals search engine 130
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Engine suspension
14,5 ± 0,4
22,2 ± 0,2
32,2 ± 0,2
44,5 ± 0,4
55 ± 0,5
65 ± 0,5
74,5 ± 0,4
86,5 ± 0,6
92,2 ± 0,2
105 ± 0,5
112,2 ± 0,2
124,5 ± 0,4
134,5 ± 0,4
144,5 ± 0,4
Engine: WJY
B1BP1U5P
XSARA
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 130

Downloaded from www.Manualslib.com manuals search engine 132
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Crankshaft
Bearing cap fixing screws7 ± 0,7
Con rod nuts
Pre-tightening2 ± 0,2
Angular tightening70°±5°
Accessories drive pulley hub
Pre-tightening4 ± 0,2
Angular tightening55°±5°
Accessories drive pulley1 ± 0,1
Cylinder block
Piston spray jet1 ± 0,1
Sump1,6 ± 0,1
Timing belt guide roller4,3 ± 0,4
Timing belt tensioner roller2,1 ± 0,2
Cylinder head
Camshaft bearing covers2 ± 0,2
Exhaust manifold3 ± 0,3
Valve cover0,5
Camshaft / hub4,3 ± 0,4
Camshaft pinion / hub2,3 ± 0,2 Engine: WJY
XSARA
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 132

Downloaded from www.Manualslib.com manuals search engine 134
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Engine suspension
14,5 ± 0,4
22,2 ± 0,2
32,2 ± 0,2
46,1 ± 0,6
54,5 ± 0,5
64,5 ± 0,5
74,5 ± 0,4
86,5 ± 0,6
92,2 ± 0,2
105 ± 0,5
112,2 ± 0,2
124,5 ± 0,4
134,5 ± 0,4
Engines: RHY - RHZ
B1BP1YDP
XSARA
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 134

Downloaded from www.Manualslib.com manuals search engine 136
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Flywheel
Flywheel4,8 ± 0,4
Clutch mechanism2 ± 0,2
Lubrication circuit
Oil pump1,6 ± 0,2
Coolant oil heat exchanger7 ± 0,7
Turbocharger lubrication pipe
Engine end4,8 ± 0,4
Turbocharger end2,2 ± 0,2
Injection circuit
Injector fixing flange nut3 ± 0,3
Unions on fuel high pressure common injection rail2 ± 0,2
Injection pump on support2,3 ± 0,2
Union on diesel injector2 ± 0,2
Injection pump pulley5 ± 0,5
Union on fuel high pressure pump2 ± 0,2
Cooling circuit
Coolant pump1,5 ± 0,1
Coolant inlet housing1,8 ± 0,1 Engines: RHY - RHZ
XSARA
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 136

Downloaded from www.Manualslib.com manuals search engine 138
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Cylinder head
Exhaust manifold
1Pre-tightening1,5
Tightening3 ± 0,3
2 Turbocompressor 2,5 ± 0,2
3 Exhaust clip 2,5 ± 0,5
Cylinder head bolts (*)
Pre-tightening2,2 ± 0,2
4Tightening6 ± 0,5
Slackening1 Turn
Tightening6 ± 0,5
Angular tightening220° ± 5°
Engine: RHR
B1DP1LCPB1DP1LDC
(*) (4) Sequence of tightening
C4
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 138

Downloaded from www.Manualslib.com manuals search engine 140
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Engine: RHR
B1DP1LED
(*) Bolts (5) and (7) Sequence of tightening(*) Bolts (8) Sequence of tightening
Cylinder head
(5) Camshaft bearing cap cover screws
(7) Camshaft bearing cap cover studs(8) Inlet valve cover screws
B1BP38ZD
C4
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 140

Downloaded from www.Manualslib.com manuals search engine 142
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Cylinder block
13 Front closing plate screw
Flywheel screws
14Pre-tightening1,5
Tightening4,7 ± 0,4
Accessories drive pulley screw
15Pre-tightening7 ± 0,25
Angular tightening60°±5°
Engine: RHR
B1CP0GNP
C4
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 142

Downloaded from www.Manualslib.com manuals search engine 144
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Lubrication
22 Oil pressure switch 2 ± 0,2
Oil filter support (*)
23Tightening1 ± 0,1
Tightening2 ± 0,2
24 Oil filter cover 2,5 ± 0,5
Engine: RHR
B1CP0GPPB1FP062C
(*) (23) Sequence of tightening
C4
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 144

Downloaded from www.Manualslib.com manuals search engine 146
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Injection circuit
28 High pressure pipe union on injector 2,5 ± 0,2
Diesel injector nuts
29Do up both nuts by hand
Tightening0,4 ± 0,3
Angular tightening45°±5°
30 Fuel high pressure pump screw 2,25 ± 0,3
31 High pressure pipe union on fuel high pressure pump 2,5 ± 0,2
32 Fuel high pressure supply common rail nuts 3 ± 0,3
33 Union on fuel high pressure supply common rail 2,5 ± 0,2
Engine: RHR
B1HP22LD
C4
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 146

Downloaded from www.Manualslib.com manuals search engine 148
ENGINESPECIAL FEATURES - CYLINDER HEAD TIGHTENING
Engines all types
B1DP05BC
Cleaning to be carried out just prior to refitting the cylinder head.
WARNING: Clean the contact faces with the approved CITROËN cleaning product.
Do not use abrasives or cutting tools on the contact faces.
The contact faces must not bear any traces of impact or scratching.
Insert a tap in the threads of the holes in the cylinder block receiving the cylinder head bolts.
Brush the threads of the cylinder head bolts..
Oil the threads and under the heads of the bolts, usingMOLYKOTE G RAPID PLUS.
EnginesTightening Cylinder head bolts
(m.daN)(Max. reusable length in mm)
NFUTightening2 ± 0,2
Angular tightening260° ± 5°122 ± 0,3
Pre-tightening1,5 ± 0,2
KFUTightening2,5 ± 0,2 119
Angular tightening200° ± 5°
6FZ - RFNPre-tightening1,5 ± 0,1
147
Tightening5 ± 0,1
RFJAngular slackening360° ± 2° 127,5 ± 0,5
Tightening2 ± 0,75
RFKAngular tightening285° ± 5° 144,5 ± 0,5
NOTE: Tightening of the cylinder head after a repair is prohibited.
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 148