windshield wipers DAEWOO MATIZ 2003 Service User Guide

9D –10 WIPERS/WASHER SYSTEMS
DAEWOO M-150 BL2
D19D533A
1.5–2.0 Nm
Installation Procedure
1. Install the wiper linkage with the wiper linkage nuts.
Tighten
Tighten the wiper linkage nuts to 1.5–2.0 Nm (13–18
lb-in).
a. Wiper linkage nut.
2. Install the wiper motor linkage ball.
3. Install the cowl vent grille. Refer to Section 9R, Body
Front End.
4. Install the windshield wiper arms. Refer to ”Wind-
shield Wiper Arm” in this section.
D109D534
WINDSHIELD WIPER BLADE
Removal Procedure
1. Pull the wiper blade off the arm by pushing the wiper
blade retaining clip (1).
D109D535
Installation Procedure
1. Install the wiper blade to the arm.
D109D536
WASHER RESERVOIR
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the washer reservoir inlet.

Remove the bolt (1).

Remove the washer reservoir inlet (2).

9D –12 WIPERS/WASHER SYSTEMS
DAEWOO M-150 BL2
D109D539
Installation Procedure
1. Install the wiper motor to the washer reservoir assem-
bly.
2. Install the washer reservoir assembly.
Refer to “Washer Reservoir” in this section.
3. Connect the negative battery cable.
4. Fill the washer reservoir.
D109D541
WINDSHIELD WASHER NOZZLE
Removal Procedure
1. Remove the cowl vent grille. Refer to Section 9R,
Body Front End.
2. Remove the washer nozzle from the cowl vent grille.

Disconnect the washer nozzle hose (1).

Remove the washer nozzle (2).
D109D542
Installation Procedure
1. Install the washer nozzle to the cowl vent grille.
2. Install the washer nozzle hose to the washer nozzle.
3. Install the cowl vent grille. Refer toSec-
tion 9R, Body Front End.
D109D543
REAR WINDOW WASHER NOZZLE
Removal Procedure
1. Remove the washer nozzle from the wiper arm.

Disconnect the washer nozzle hose (1).

Remove the washer nozzle (2).

9D –16 WIPERS/WASHER SYSTEMS
DAEWOO M-150 BL2
SCHEMATIC AND ROUTING DIAGRAMS
WINDSHIELD/REAR WINDOW WIPER AND WASHER SYSTEM
D19D208B