Stop lamp DODGE NEON 1997 1.G Wiring Diagrams User Guide
[x] Cancel search | Manufacturer: DODGE, Model Year: 1997, Model line: NEON, Model: DODGE NEON 1997 1.GPages: 256, PDF Size: 2.99 MB
Page 65 of 256

Downloaded from www.Manualslib.com manuals search engine 8W-30 FUEL/IGNITION SYSTEMS
INDEX
page
SCHEMATICS AND DIAGRAMS........................................................... 1
DESCRIPTION AND OPERATION......................................................... 14
Component Page
A/C Compressor Clutch Relay..........8W-30-11
A/C High Pressure Switch.............8W-30-11
Airbag Control Module................8W-30-4
Automatic Shut Down Relay..........8W-30-2, 3
Battery Temperature Sensor..........8W-30-3, 7
Camshaft Position Sensor...........8W-30-7, 13
Controller Anti-Lock Brake..........8W-30-4, 12
Crankshaft Position Sensor..........8W-30-7, 13
Data Link Connector................8W-30-2, 4
Downstream Heated Oxygen Sensor......8W-30-3
Duty Cycle Evap/Purge Solenoid.........8W-30-9
EGR Transducer Solenoid..............8W-30-9
Engine Coolant Temperature Sensor......8W-30-7
Fuel Injector No. 1...................8W-30-5
Fuel Injector No. 2...................8W-30-5
Fuel Injector No. 3...................8W-30-5
Fuel Injector No. 4...................8W-30-5
Fuel Pump Module..................8W-30-10
Fuel Pump Relay....................8W-30-10
Fuse 5 (FB)........................8W-30-12
Fuse 10 (FB).....................8W-30-9, 10
Fuse 10 (FB)........................8W-30-9
Fuse 21 (PDC)................8W-30-2, 3, 4, 10
Fuse 25 (PDC)......................8W-30-12
Fuse Block....................8W-30-9, 10, 12
G101..............................8W-30-3
G102.........................8W-30-2, 4, 12
G106..............................8W-30-2
G303.............................8W-30-10
Generator.........................8W-30-11
IAT/MAP Sensor.....................8W-30-6
Idle Air Control Motor.................8W-30-8
Ignition Coil Pack....................8W-30-5
Immobilizer Engine Sensor............8W-30-13
Immobilizer Sensor..............8W-30-3, 8, 13
Instrument Cluster...........8W-30-7, 8, 10, 11Component Page
Knock Sensor.......................8W-30-6
Noise Supressor.....................8W-30-5
Park/Neutral Position Switch..........8W-30-12
Power Distribution Center....8W-30-2, 3, 4, 10, 12
Power Steering Pressure Switch.........8W-30-4
Powertrain Control
Module . 8W-30-2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
S101.............................8W-30-12
S102..............................8W-30-4
S104...........................8W-30-2, 12
S104............................8W-30-2, 4
S105............................8W-30-2, 4
S106.............................8W-30-12
S107..............................8W-30-3
S109...........................8W-30-9, 10
S110 ......................8W-30-3, 6, 7, 8, 13
S118 ..........................8W-30-3, 7, 8
S119 ..............................8W-30-3
S120........................8W-30-3, 6, 7, 8
S121..............................8W-30-5
S122..........................8W-30-2, 3, 5
S123.............................8W-30-13
S123............................8W-30-7, 8
S124..............................8W-30-6
S126..............................8W-30-9
S127..............................8W-30-3
S129.............................8W-30-13
S134..............................8W-30-5
S211 .............................8W-30-12
Solid State Fan Relay................8W-30-11
Stop Lamp Switch...................8W-30-12
Throttle Position Sensor...............8W-30-6
Torque Converter Clutch Solenoid........8W-30-9
Upstream Heated Oxygen Sensor........8W-30-3
Vapor Canister Leak Detector...........8W-30-9
Vehicle Speed Sensor...............8W-30-8, 13
8W - 30 - 2 8W - 30 FUEL/IGNITION SYSTEMSPL
Page 76 of 256

Downloaded from www.Manualslib.com manuals search engine 5FUSE10A
25
RUN A22
BLOCK FUSE
5
F20
20
WT
F20
20
WT
F20
20
WT
S211
3C103
2
3
T41
20
BR/YL
T41
20
BR/YL
S106
76
MODULE CONTROL
POWERTRAIN
PARK/
NEUTRAL
POSITION
SWITCH
SENSE62
MODULE CONTROL
POWERTRAIN
STOP
LAMP
SWITCH
SENSE
25FUSE15A
25
BATT A0
73
2
16
5
K29
20
WT/PKF32
18
PK/DB
SWITCH LAMP
STOPCENTER DISTRIBUTION
POWER
Z12
20
BK/TN
Z12
20
BK/TN
G102
S104
WT/TN20 L50
WT/TN20 L50
NO
CONNECTION
SWITCH POSITION
NEUTRAL
PARK/C1
C1
(A/T)
1
2C105
L50
22
WT/TNL50
20
WT/TN
S101
13
CONTROLLER
ANTI-LOCK
BRAKE
L50
20
WT/TN
L50
22
WT/TN
NO
CONNECTION
A/T M/T
(A/T)
(8W-11-8)(8W-11-2) (8W-10-4)
(8W-11-8)
(8W-21-2)(8W-10-9)(8W-10-4)
(8W-10-4)
(8W-15-3) (8W-21-2)
(8W-35-4)
(8W-15-3)
8W - 30 - 12 8W-30 FUEL/IGNITION SYSTEMPL-RHD
978W-1PLR03011
Page 85 of 256

Downloaded from www.Manualslib.com manuals search engine 8W-35 ANTI-LOCK BRAKES
INDEX
page
SCHEMATICS AND DIAGRAMS........................................................... 1
DESCRIPTION AND OPERATION.......................................................... 6
Component Page
ABS Hydraulic Modulator..............8W-35-4
ABS Pump Motor....................8W-35-3
ABS Pump Motor Relay.............8W-35-2, 3
ABS Relay Box....................8W-35-2, 3
ABS System Relay...................8W-35-2
ABS Warning Lamp..................8W-35-2
Controller Anti-Lock Brake.......8W-35-2, 3, 4, 5
Data Link Connector..................8W-35-3
Fuse 10 (FB)........................8W-35-2
Fuse 10 (PDC).......................8W-35-3
Fuse 25 (PDC).......................8W-35-4
Fuse Block.........................8W-35-2
G101..........................8W-35-2, 3, 4
G102..............................8W-35-4Component Page
Instrument Cluster...................8W-35-2
Left Front Wheel Speed Sensor..........8W-35-5
Left Rear Wheel Speed Sensor..........8W-35-5
Power Distribution Center...........8W-35-3, 4
Pump Motor Driver...................8W-35-3
Right Front Wheel Speed Sensor........8W-35-5
Right Rear Wheel Speed Sensor.........8W-35-5
S101..............................8W-35-4
S103..............................8W-35-3
S104..............................8W-35-4
S108..........................8W-35-2, 3, 4
S109..............................8W-35-2
S210..............................8W-35-3
Stop Lamp Switch....................8W-35-4
8W - 35 - 2 8W - 35 ANTI-LOCK BRAKESPL
Page 88 of 256

Downloaded from www.Manualslib.com manuals search engine LEFT
FRONT
DECAY
SOLENOID
CONTROL CONTROLSOLENOIDDECAYREARLEFT RIGHT
REAR
DECAY
SOLENOID
CONTROL CONTROL SOLENOIDDECAY FRONTRIGHT
LEFT
FRONT
DECAY
SOLENOID
CONTROL CONTROLSOLENOIDDECAYREARLEFT RIGHT
FRONT
DECAY
SOLENOID
CONTROL CONTROLSOLENOIDDECAYREAR RIGHT
65OUTPUTSWITCHLAMPSTOP
S108
5 GROUND
15A
FUSE
25
POWER
DISTRIBUTION
CENTER
25
26
F32
18
PK/DB
5 6
STOP
LAMP
SWITCH
L50
20
WT/TN
S101
L50
20
WT/TN
Z1
18
BKZ1
18
BK
Z1
14
BK
G101
Z12
18
BK/TN
Z12
18
BK/OR
13
B142
20
BR/YL
B146
20
BR/LBB143
20
DG/YLB148
20
DB/LB
42464348
G102 S104 MODULATOR HYDRAULIC
ABSBRAKE ANTI-LOCK
CONTROLLER
BATT A0
4 2 3 1
(8W-15-2)(8W-10-9)(8W-10-4)
(8W-30-12)
(8W-30-12)
(8W-15-2) (8W-15-3)(8W-15-3) (8W-10-4)
8W - 35 - 4 8W-35 ANTI-LOCK BRAKESPL-RHD
978W-1PLR03503
Page 91 of 256

Downloaded from www.Manualslib.com manuals search engine WHEEL SPEED SENSORS
There are four wheel speed sensors, one at each
wheel. The sensors use a tone wheel to determine
wheel speed. Input to the Controller Anti Lock Brake
(CAB) is done on the following circuits. All of these
circuits are a twisted pair.
B8 and B9 for the left front wheel (cavity 8 and
cavity 9).
B6 and B7 for the right front wheel (cavity 6 and
cavity 7).
B3 and B4 for the left rear wheel (cavity 3 and cav-
ity 4).
B1 and B2 for the right rear wheel (cavity 1 and
cavity 2).
BRAKE SWITCH INPUT
Circuit L50 is an input to the Controller Anti Lock
Brake (CAB). The L50 connects to cavity 13 of the
CAB connector. Circuit L50 is spliced in with the
stop lamps and is used to provide the CAB with
information on when the brakes are being applied.
DATA LINK CONNECTOR
Circuit D21 is used for diagnostics of a fault with
the ABS system. It is spliced in with the Powertrain
Control Module (PCM) circuits and used as an output
from the Controller Anti Lock Brake (CAB). Circuit
D21 connects to cavity 51 of the CAB connector.
HELPFUL INFORMATION
²Check the 15 amp fuse located in cavity 10 of
the fuse block.
²Check the 40 amp fuse located in the PDC.
²Check for a good ground at the left headlamp
ground.
²Check the case ground on the CAB
²Refer to the appropriate section of the service
manual, or the Diagnostic Test Procedures Manual.
PL8W - 35 ANTI-LOCK BRAKES 8W - 35 - 7
DESCRIPTION AND OPERATION (Continued)
Page 145 of 256

Downloaded from www.Manualslib.com manuals search engine 8W-51 REAR LIGHTING
INDEX
page
SCHEMATICS AND DIAGRAMS........................................................... 1
DESCRIPTION AND OPERATION.......................................................... 9
Component Page
A/C Heater Control Switch.............8W-51-8
Back-Up Lamp Switch................8W-51-2
Fog Lamp Relay (In Pdc)...............8W-51-6
Front Fog Lamp Switch...............8W-51-6
Fuse 2 (FB).......................8W-51-4, 8
Fuse 3 (PDC)........................8W-51-8
Fuse 5 (FB).........................8W-51-2
Fuse 9 (FB).........................8W-51-8
Fuse 16 (PDC).......................8W-51-6
Fuse 25 (PDC).......................8W-51-4
Fuse Block......................8W-51-2, 4, 8
G101..............................8W-51-6
G103..............................8W-51-6
G204..............................8W-51-6
G301..........................8W-51-3, 5, 7
G302..........................8W-51-3, 5, 7
Headlamp Switch..................8W-51-4, 8
Left Back-Up Lamp...................8W-51-3
Left Fog Lamp......................8W-51-6
Left Headlamp......................8W-51-6
Left License Lamp...................8W-51-5
Left Rear Fog Lamp..................8W-51-7
Left Tail/Stop Lamp..................8W-51-5
Park/Neutral Position Switch...........8W-51-2
Power Distribution Center.........8W-51-4, 6, 8
Powertrain Control Module.............8W-51-2Component Page
Rear Fog Lamp Switch............8W-51-6, 7, 8
Right Back-Up Lamp.................8W-51-3
Right Fog Lamp.....................8W-51-6
Right License Lamp..................8W-51-5
Right Rear Fog Lamp.................8W-51-7
Right Tail/Stop Lamp.................8W-51-5
S101..............................8W-51-4
S106..............................8W-51-2
S107..............................8W-51-6
S115 ..............................8W-51-6
S117 ..............................8W-51-6
S127..............................8W-51-6
S201..............................8W-51-6
S210..............................8W-51-8
S211 ..............................8W-51-2
S213..............................8W-51-8
S221..............................8W-51-8
S301..............................8W-51-3
S306..............................8W-51-5
S307..........................8W-51-3, 5, 7
S308..........................8W-51-3, 5, 7
S315..............................8W-51-3
S315............................8W-51-5, 7
S316..............................8W-51-5
S317..............................8W-51-7
Stop Lamp Switch....................8W-51-4
8W - 51 - 2 8W - 51 REAR LIGHTINGPL
Page 148 of 256

Downloaded from www.Manualslib.com manuals search engine 25FUSE15A
25
BATT A0
CENTER
DISTRIBUTION
POWER
5 6
F32
18
PK/DB
STOP
LAMP
SWITCH
L50
20
WT/TN
S101
L50
22
WT/TNL50
20
WT/TN
2C105
L50
20
WT/TN
B
(8W-51-5)TO
S316
BATT A3
22
15A
FUSE
2
FUSE
BLOCK
1
HEADLAMP
SWITCH
1 OFF
2 PARK
3 HEAD
9
4
F33
20
PK/RD
A
(8W-51-5)TO
S306
L7
20
BK/YL
L7
20
BK/YL
2C230
M/T A/T73
(8W-10-9)(8W-10-4)
(8W-30-12)
(8W-30-12)(8W-11-4)(8W-11-2) (8W-10-4) (8W-10-6)
(8W-50-2)
8W - 51 - 4 8W-51 REAR LIGHTINGPL-RHD
978W-1PLR05103
3
2 1
Page 149 of 256

Downloaded from www.Manualslib.com manuals search engine S306
A (8W-51-4)FROM
C230
L7
20
BK/YL
1 2
2
1L7
20
BK/YL
L7
20
BK/YL
G301
Z1
18
BK
Z1
16
BK
S307
L7
18
BK/YL
L7
18
BK/YLL50
18
WT/TN
L50
18
WT/TN
5C34121L50
20
WT/TN
B (8W-51-4)FROM
C205
NO
CONNECTIONL50
20
WT/TN
S316
L50
18
WT/TN
L50
18
WT/TN
5C3402
L7
18
BK/YL
L7
18
BK/YL
S308
BK18Z1 BK18Z1
G302
Z1
18
BK
Z1
18
BK
S315
3C340
Z1
20
BKZ1
20
BK
21
312
3
LAMP STOP
TAIL/
RIGHT LEFT
TAIL/
STOP
LAMPLEFT
LICENSE
LAMP LAMPLICENSE
RIGHT
Z1
18
BK
2NO
CONNECTION
(8W-15-9) (8W-15-9)
(8W-15-8) (8W-15-8)
PL-RHD8W-51 REAR LIGHTING 8W - 51 - 5
PLR05104978W-1
Page 153 of 256

Downloaded from www.Manualslib.com manuals search engine 8W-51 REAR LIGHTING
INDEX
page page
DESCRIPTION AND OPERATION
BACK-UP LAMPS....................... 10
FOG LAMPS (REAR)...................... 9STOP LAMPS.......................... 10
TAIL LAMPS AND LICENSE LAMPS.......... 9
DESCRIPTION AND OPERATION
TAIL LAMPS AND LICENSE LAMPS
Circuit A3 in the Power Distribution Center (PDC)
connects to a bus bar in the fuse block. One of the
four circuits powered by the bus bar is circuit F33. A
40 amp fuse in the PDC protects the A3 circuit. A 15
amp fuse, in cavity number 2 of the fuse block, pro-
tects the F33 circuit.
The headlamp switch has 3 positions, ON, PARK
(tail lamps) and OFF, plus a dimmer switch. When
the headlamp switch is in the PARK or ON position,
it connects circuit F33 to circuit L7. From the head-
lamp switch, circuit L7 branches to power the front
parking lamps, rear tail lamps, side marker lamps,
and rear license plate lamp.
GROUND CIRCUIT
Circuit Z1 provides ground for the tail lamps, park-
ing lamps, headlamps, side marker lamps, lamps and
rear license plate lamps although different grounding
points are used. Circuit Z1 also provides the ground
path for the headlamps, stop lamps and turn signals.
HELPFUL INFORMATION
²Check for a blown 40 amp fuse in the PDC.
²Check for a blown fuse in cavity 2 of the fuse
block
²For the left rear parking lamp, turn signal, side
marker lamp, and the rear license plate the Z1 cir-
cuit grounding point is in the left rear wheel well.
²For the right rear parking lamp, turn signal and
side marker lamp, the Z1 circuit grounding point is
in the right rear wheel well.
²Circuit L7 also feeds the radio, if equipped.
²When the headlamp switch is in the PARK or
ON position, the dimmer circuit, F33, connects to cir-
cuit E1. Circuit E1 powers the ash receiver lamp,
transmission range indicator lamp, instrument panel
cluster illumination lamps, HVAC control lamp,
heated rear window lamp, and radio lamp. A 4 amp
fuse, in cavity 12 of the fuse block, protects circuit
E1.
FOG LAMPS (REAR)
The rear fog lamps will operate only when the
headlamp switch is in the ON position.
Circuit A3 from the Power Distribution Center sup-
plies (PDC) voltage to a bus bar in the fuse block.
Circuit F61 is one of four circuits that the bus bar
feeds and is protected by a 20 amp fuse in cavity 4.
Circuit F61 connects to the rear fog lamp switch and
the front fog lamp relay.
The fog lamp switch contains a relay that supplies
voltage to the fog lamps. Circuit L2 from the multi-
function switch supplies voltage to the coil side of the
relay (only when the headlamps operate on LOW
beam). Circuit F61 supplies voltage to the contact
side of the relay. During LOW beam headlamp oper-
ation when the fog lamp switch contacts CLOSE, cir-
cuit F61 connects to circuit L38.
Circuit L38 feeds right and left fog lamp. Circuit
L38 also feeds the green L.E.D. in the switch that
illuminates during fog lamps operation.
When the headlamp switch is in the PARK or ON
position, circuit E1 from the headlamp switch sup-
plies voltage for circuit E2. Circuit E2 contains a 4
amp fuse in cavity 12 of the fuse block, and powers
the bulb in the fog lamp switch.
GROUND CIRCUIT
Although circuit Z1 provides the ground path for
the fog lamps, the circuit has different grounding
points for each lamp.
Circuit Z3 supplies the ground path for the fog
lamp switch. The grounding point for the headlamp
switch is the instrument panel left center support.
HELPFUL INFORMATION
²Circuit Z1 also supplies ground for side marker
lamps, turn signals, parking lamps and headlamps.
²Circuit A3 from the PDC supplies voltage to the
headlamp switch for circuit L2.
²Circuit F33 from the fuse block supplies voltage
to the headlamp switch for circuit E1. Circuit A3
from the PDC supplies voltage to a bus bar in the
fuse block that feeds the F33 circuit. Fuse 2, in the
fuse block, protects the F33 circuit.
PL8W - 51 REAR LIGHTING 8W - 51 - 9
Page 154 of 256

Downloaded from www.Manualslib.com manuals search engine STOP LAMPS
Circuit F32 in the Power Distribution Center
(PDC) feeds the stop lamps. Circuit F32 connects to
the stop lamp switch. A 15 amp fuse in the PDC pro-
tects circuit F32.
When the operator presses the brake pedal, the
stop lamp switch CLOSES and connects circuit F32
to circuit L50. Circuit L50 connects to the stop
lamps. Circuit L50 also splices to power the CHMSL
lamp.
GROUND CIRCUIT
Circuit Z1 provides ground for the stop lamps,
CHMSL lamp, and the stop lamp switch. The Z1 cir-
cuit has more than one grounding point. It also sup-
plies ground path for the tail lamps, parking lamps,
headlamps, side marker lamps, rear license plate
lamp, back-up lamps and turn signals.
HELPFUL INFORMATION
²Check for blown fuses in circuit F32 (in PDC).
²Check for continuity across the stop lamp switch
when it is CLOSED.
²For rear lighting on the left side of the vehicle,
the Z1 circuit grounding point is in the left rear
wheel well.
²For rear lighting on the right side of the vehicle,
the Z1 circuit grounding point is in the right rear
wheel well.
²For the stop lamp switch, the Z1 circuit ground-
ing point is in the left front inner fender shield.
BACK-UP LAMPS
In the RUN position, the ignition switch connects
circuit A2 from the Power Distribution Center (PDC)to circuit A22. Circuit A22 feeds a bus bar in the fuse
block. A 40 amp fuse in the PDC protects the A2 and
A22 circuits.
Circuit F20 is one of four circuits that connects to
the fuse block bus bar fed by circuit A22. Circuit F20
supplies power to the back-up lamp switch. On 3±spd
automatic transaxle vehicles, the back-up lamp
switch is part of an assembly that includes the park/
neutral position switch.
When the operator puts the transmission in
REVERSE, the back-up lamp switch connects circuit
F20 to circuit L1. Circuit L1 feeds the back-up lamps.
A 10 amp fuse, in cavity 8 of the fuse block, protects
F20 and L1 circuits.
GROUND CIRCUIT
Circuit Z1 provides ground for the back-up lamps.
The Z1 circuit has more than one grounding point. It
also supplies ground path for the tail lamps, parking
lamps, headlamps, side marker lamps, rear license
plate lamp, stop lamps and turn signals.
HELPFUL INFORMATION
²Check for blown fuses in circuits A2 and F20.
²Check for continuity across the stop lamp switch
when it is CLOSED.
²For rear lighting on the left side of the vehicle,
the Z1 circuit grounding point is in the left rear
wheel well.
²For rear lighting on the right side of the vehicle,
the Z1 circuit grounding point is in the right rear
wheel well.
²Circuit F20 feeds the heated rear window switch
and A/C clutch cycling switch.
8W - 51 - 10 8W - 51 REAR LIGHTINGPL
DESCRIPTION AND OPERATION (Continued)