belt DODGE RAM SRT-10 2006 Service Repair Manual

page page
A-PILLAR WEATHERSTRIP RETAINER
REMOVAL ................................... 301
INSTALLATION .............................. 301
DRIP RAIL WEATHERSTRIP
REMOVAL ................................... 302
INSTALLATION .............................. 302
DOOR OPENING SEAL
REMOVAL ................................... 303
INSTALLATION .............................. 306
DRIP RAIL WEATHERSTRIP RETAINER
REMOVAL ................................... 310
INSTALLATION .............................. 310
FRONT DOOR GLASS RUN WEATHERSTRIP
REMOVAL ................................... 311
INSTALLATION .............................. 312FRONT DOOR OUTER BELT MOLDING
REMOVAL ................................... 313
INSTALLATION .............................. 313
FRONT DOOR INNER BELT MOLDING
REMOVAL ................................... 314
INSTALLATION .............................. 314
REAR DOOR GLASS RUN WEATHERSTRIP
REMOVAL ................................... 316
INSTALLATION .............................. 316
REAR DOOR OUTER BELT MOLDING
REMOVAL ................................... 317
INSTALLATION .............................. 317
REAR DOOR INNER BELT MOLDING
REMOVAL ................................... 318
INSTALLATION .............................. 318

FRONT DOOR OUTER BELT MOLDING
REMOVAL
1. Remove the screw (4) and separate the belt mold-
ing (1) from the door (5) flange from the back to
the front.
INSTALLATION
1. Position the belt molding (1) onto the door (5)
flange and seat fully.
2. Install the screw (4).

FRONT DOOR INNER BELT MOLDING
REMOVAL
1. Remove the door trim panel (3) (Refer to 23 -
BODY/DOOR - FRONT/TRIM PANEL - REMOVAL)
2. Separate the belt molding (1) from the door (3)
mounting flange from the back to the front.
INSTALLATION
1. Position the belt molding (1) and seat onto the door
(3) mounting flange fully.

REAR DOOR OUTER BELT MOLDING
REMOVAL
1. Remove the screw (3) and separate the belt mold-
ing (1) from the door (2) flange from the back to
the front.
INSTALLATION
1. Position the belt molding (1) onto the door (2)
flange and seat fully.
2. Install the screw (3).

REAR DOOR INNER BELT MOLDING
REMOVAL
1. Remove the door trim panel (5) (Refer to 23 -
BODY/DOORS - REAR/TRIM PANEL - REMOVAL).
2. Separate the belt molding (2) from the rear door
mounting flange from the back to the front.
INSTALLATION
1. Position the belt molding (2) and seat onto the rear
door mounting flange fully.

DESCRIPTION FIGURE
RIGHT REAR FRONT SEAT MOUNTING CROSSMEMBER TO LEFT REAR FRONT
SEAT MOUNTING CROSSMEMBER TO REAR FLOOR PAN70
FRONT SEAT MOUNTING FRONT CROSSMEMBER AND STORAGE BIN TO FLOOR
SILL TO FRONT AND REAR FLOOR PAN71
FRONT SEAT MOUNTING FRONT CROSSMEMBER TO UNDERBODY SUPPORT TO
FRONT FLOOR PAN72
A-PILLAR REINFORCEMENT TO INNER BODY SIDE APERTURE TO OUTER BODY
SIDE APERTURE73
A-PILLAR REINFORCEMENT TO FRONT APERTURE EXTENSION TO INNER BODY
SIDE APERTURE TO OUTER BODY SIDE APERTURE74
INNER BODY SIDE APERTURE TO OUTER BODY SIDE APERTURE 75
SHOULDER BELT REINFORCEMENT TO INNER BODY SIDE APERTURE TO OUTER
BODY SIDE APERTURE76
FRONT PILLAR TAPPING PLATES TO INNER BODY SIDE APERTURE TO OUTER
BODY SIDE APERTURE77
INNER BODY SIDE APERTURE TO OUTER BODY SIDE APERTURE 78
C-PILLAR BAFFLE AND OUTER BODY SIDE APERTURE TO INNER BODY SIDE
APERTURE79
A-PILLER REINFORCEMENT TO INNER BODY SIDE APERTURE TO OUTER BODY
SIDE APERTURE80
FRONT EXTENSION PLATE TO INNER BODY SIDE APERTURE TO OUTER BODY
SIDE APERTURE TO A-PILLAR REINFORCEMENT81
OUTER BODY SIDE APERTURE TO INNER BODY SIDE APERTURE 82
B-PILLAR REINFORCEMENT TO INNER BODY SIDE APERTURE TO OUTER BODY
SIDE APERTURE83
UPPER B-PILLAR TAPPING PLATE AND LOWER B-PILLAR TAPPING PLATE TO
OUTER BODY SIDE APERTURE84
UPPER A-PILLAR TAPPING PLATE AND LOWER A-PILLAR TAPPING PLATE TO INNER
BODY SIDE APERTURE85
SEAT BELT MOUNTING PLATES AND REINFORCEMENTS TO INNER BODY SIDE
APERTURE86
OUTER BODY SIDE APERTURE TO INNER BODY SIDE APERTURE 87
C-PILLAR REINFORCEMENTS AND SHOULDER BELT MOUNTING REINFORCEMENT
TO INNER BODY SIDE APERTURE TO OUTER BODY SIDE APERTURE88
SEAT BELT RETRACTOR PLATE TO FLOOR SILL TO INNER BODY SIDE APERTURE
TO OUTER BODY SIDE APERTURE89
FLOOR SILL TO INNER BODY SIDE APERTURE TO OUTER BODY SIDE APERTURE 90
BACK REINFORCEMENT AND CAB BACK PANEL TO REAR FLOOR CROSSMEMBER
AND INNER BODY SIDE APERTURE TO OUTER BODY SIDE APERTURE91
CAB BACK REINFORCEMENT TO CAB BACK PANEL (CHILD TETHERS) 92
COWL SIDE PANEL TO INNER BODY SIDE APERTURE TO OUTER BODY SIDE
APERTURE93
OUTER ROOF PANEL TO OUTER BODY SIDE APERTURE 94
ROOF HEADER TO OUTER ROOF PANEL TO A-PILLAR REINFORCEMENT TO INNER
BODY SIDE APERTURE TO OUTER BODY SIDE APERTURE95
REAR ROOF HEADER TO OUTER ROOF PANEL TO INNER BODY SIDE APERTURE
TO OUTER BODY SIDE APERTURE96
OUTER BODY SIDE APERTURE TO CAB BACK PANEL TO FLOOR SILL, INNER BODY
SIDE APERTURE TO FLOOR SILL97

DESCRIPTION FIGURE
OUTER BODY SIDE APERTURE TO INNER BODY SIDE APERTURE TO FLOOR SILL 98
REAR FLOOR CROSSMEMBER AND CAB BACK REINFORCEMENT TO CAB BACK
PANEL TO INNER BODY SIDE APERTURE99
CAB BACK REINFORCEMENT TO CAB BACK PANEL 100
CENTER SHOULDER BELT REINFORCEMENT AND TAPPING PLATES TO CAB BACK
REINFORCEMENT101
A-PILLAR REINFORCEMENT TO COWL SIDE PANEL TO OUTER BODY SIDE
APERTURE/APERTURE EXTENSION TO COWL SIDE PANEL102
B-PILLAR REINFORCEMENT TO OUTER ROOF PANEL TO OUTER BODY SIDE
APERTURE103
FRONT ROOF HEADER TO OUTER ROOF PANEL/ROOF BOW TO INNER BODY SIDE
APERTURE/FRONT ROOF HEADER TO A-PILLAR REINFORCEMENT104
INNER BODY SIDE APERTURE TO REAR ROOF HEADER AND OUTER BODY SIDE
APERTURE TO OUTER ROOF PANEL105
FRONT CROSSMEMBER, WHEELHOUSE CROSSMEMBER AND BRACKET SUPPORT
CROSSMEMBER TO BOX FLOOR PAN106
LONG CROSSMEMBER AND FLOOR BOX CROSS SILL TO BOX FLOOR PAN 107
TAPPING PLATES AND SUPPORT BRACKETS TO REAR CROSS BOX SILL, FRONT
WHEELHOUSE, LONG AND BRACKET SUPPORT CROSSMEMBERS108
STAKE POCKET REINFORCEMENTS AND TIE DOWN REINFORCEMENTS TO INNER
BOX SIDE PANEL109
OUTER BOX SIDE REINFORCEMENT BRACES NUT PLATES TO OUTER BOX SIDE
PANEL MOUNTING11 0
OUTER WHEELHOUSE TO OUTER BOX SIDE PANEL 111
WELD NUT STRIKER CAGE NUT, OUTER BOX SIDE PANEL AND NUT PLATE TO BOX
SIDE TAILGATE REINFORCEMENT11 2
FRONT BOX PANEL TO FRONT INNER STAKE POCKET REINFORCEMENT TO FRONT
BOX SIDE PANEL11 3
FRONT CROSSMEMBER TO FRONT BOX SIDE PANEL AND BOX FLOOR PANEL TO
BOX FRONT PANEL11 4
BOX FLOOR PANEL AND INNER WHEELHOUSE PANEL TO INNER BOX SIDE PANEL 115
FRONT CROSSMEMBER AND END SUPPORT BRACKET TO LONG CROSSMEMBER
TO INNER BOX SIDE PANEL/STAKE POCKET REINFORCEMENT AND BOX FLOOR
SILL TO OUTER TAILGATE PILLAR TO INNER TAILGATE PILLAR11 6
STAKE POCKET REINFORCEMENT AND BOX FLOOR SILL CROSSMEMBER TO
INNER TAILGATE PILLAR11 7
INNER TAILGATE PILLAR PANEL TO INNER BOX SIDE PANEL TO TIE DOWN
MOUNTING REINFORCEMENT11 8
BOX FLOOR SILL CROSSMEMBER TO INNER BOX SIDE PANEL 119
INNER TAILGATE PILLAR TO TAILGATE BOX SIDE REINFORCEMENT TO OUTER
TAILGATE PILLAR120
BOX SIDE PANEL AND OUTER TAILGATE PILLAR TO OUTER BOX SIDE PANEL 121
FRONT BOX PANEL TO OUTER BOX SIDE PANEL 122
INNER BOX SIDE PANEL AND INNER TAILGATE PILLAR TO OUTER BOX SIDE PANEL 123
OUTER WHEELHOUSE PANEL TO INNER WHEELHOUSE PANEL 124
FRONT CROSSMEMBER, LONG CROSSMEMBER, AND WHEELHOUSE
CROSSMEMBER TO FLOOR PAN125
WHEELHOUSE CROSSMEMBER, LONG CROSSMEMBER AND REAR CROSS BOX
SILL TO BOX FLOOR PAN126

Fig. 75 INNER BODY SIDE APERTURE - STANDARD CAB
Fig. 76 SHOULDER BELT REINFORCEMENT - STANDARD CAB

Fig. 85 UPPER A-PILLAR TAPPING PLATE - QUAD CAB
Fig. 86 SEAT BELT MOUNTING PLATES - QUAD CAB

Fig. 89 SEAT BELT RETRACTOR PLATE - STANDARD CAB