fog light bulb DODGE SPRINTER 2007 2.G Owners Manual
[x] Cancel search | Manufacturer: DODGE, Model Year: 2007, Model line: SPRINTER, Model: DODGE SPRINTER 2007 2.GPages: 393, PDF Size: 7.61 MB
Page 307 of 393
306 Practical hintsChanging bulbs
5
\3 Changing bulbsBulbs and lights are an important aspect of
vehicle safety. For this reason, make sure
that all bulbs are in working order at all
times.
\4Switch off the lights to avoid a short cir-
cuit.
\4Only touch new bulbs with a clean lint-
free cloth or something similar. Do not
work with wet or greasy fingers.
\4Only fit 12 V bulbs of the same type as
before and of the correct wattage.
\4Have the headlamp setting checked
regularly.\4If the newly installed bulb does not light
up either, visit an authorized Sprinter
Dealer.
\4Have the following LEDs and bulbs
changed at an authorized Sprinter
Dealer:
\4The additional turn signals in the
exterior mirrors
\4The third brake lamp (cargo and
passenger vans only)*
\4The bi-xenon headlamps*
\4The foglamps* Before changing bulbs
Warning
G
Bulbs and bulb holders can become very
hot. For this reason, allow the light to cool
down before changing the bulb.
Keep bulbs out of the reach of children.
Never use a bulb which has been dropped.
Such a bulb may explode and injure you.
H7 bulbs are pressurized and may explode
when changed. You should therefore wear
eye protection and gloves when you are
changing them.
Page 308 of 393
307 Practical hints
Changing bulbs
5
\1Switch off the lighting.
\1Open the hood (\2page 185).
Bi-xenon headlamps*
High-beam headlamps, low-beam head-
lamps
1Catches
2Housing cover
Front bulbs
Bulb
Model
1
Additional turn signal
PY 16 W
2
Turn signal
PY 21 W
3
Halogen headlamp:
low-beam headlamp
H7 55 W
Bi-xenon headlamp*:
low-beam headlamp /
high-beam headlamp
D1S-35 W
4
Halogen headlamp:
high-beam headlamp
H7 55 W
Cornering lamp*
(Canada only)
H7 55 W
5
Foglamp*
H11 55 W
6
Parking lamp/side
marker/standing
lamp (Canada only)
WY 5 W
Warning
G
Xenon bulbs carry a high voltage. You could
receive a serious or fatal electric shock if
you touch the electrical contacts on the xe-
non bulbs. Do not remove housing cover 2
(\2page 307) if the headlamps are xenon
headlamps.
Bulb
Model
Do not change xenon bulbs yourself.
Instead, always have them changed at an
authorized Sprinter Dealer which has the
necessary specialist knowledge and tools to
carry out the work required.
The manufacturer recommends that you use
an authorized Sprinter Dealer for this pur-
pose. In particular, work relevant to safety
or on safety-related systems must be car-
ried out at an authorized Sprinter Dealer.
Page 311 of 393
310 Practical hintsChanging bulbs
5
Changing the rear bulbs
(van / crewbus)
\1Switch off the lighting.
Rear lamp units
1Securing screws
\1Undo screws1 and remove the rear
lamp unit in the direction of the arrow.
\1Remove the connector.2Retaining lugs
3Brake lamp
4Side marker, Standing lamp (Canada
only), tail lamp
5Reverse lamp
6Turn signal lamp
7Rear foglamp (driver’s side)
\1Release retaining lugs2 and remove
the bulb holder from the rear lamp unit.
\1Press down on the bulb, turn it counter-
clockwise and remove it from the
holder.\1Press the new bulb into the bulb holder
and screw it in clockwise.
\1Plug the connectors into the bulb
holder.
\1Fit the rear lamp unit.
To do this, clip the bulb holder into the
three holes provided on the side and
tighten screws1.
Changing the rear bulbs (chassis)
Example illustration of chassis1Securing screws
2Lens
3Perimeter lamp, side marker
4Turn signal lamp
5Brake lamp
Page 312 of 393
311 Practical hints
Changing bulbs
5
6Tail lamp
7Rear foglamp (driver’s side)
8License plate lamp
9Reverse lamp
\1Switch off the lighting.
\1Undo screws1 and remove lens 2.
\1Press the bulb into the bulb holder and
screw it out in a counterclockwise di-
rection.
\1Press the new bulb into the bulb holder
and screw it in clockwise.
\1Replace lens2 and retighten
screws1.\1Switch off the lighting.
Identification lamps W 5 W (cab chas-
sis only)
\1Switch off the lighting.
\1Undo screws 1 and remove lamp hou-
sing.\1Turn the bulb holder 2and remove it
together with the bulb.
\1Pull the bulb out of the bulb holder 2.
\1Press the new bulb into the bulb holder
2.
\1Screw the bulb holder 2 containing
the bulb into the lamp housing.
\1Carefully reattach the lamp housing
and retighten screws 1.
Changing additional bulbs
1Securing screws
2Bulb holder
Page 385 of 393
384 IndexK
Key
battery check lamp
. . . . . . . . . . . . . 53
buttons
. . . . . . . . . . . . . . . . . . . . . . . 53
changing the batteries
. . . . . . . . . . 315
lost
. . . . . . . . . . . . . . . . . . . . . . . . . 260
malfunction
. . . . . . . . . . . . . . 259
–261
problems
. . . . . . . . . . . . . . . . . . . . 259
Key no.
. . . . . . . . . . . . . . . . . . . . . . . 373
Key positions
Kickdown . . . . . . . . . . . . . . . . . . . . . 123
Kilopascal . . . . . . . . . . . . . . . . . . . . 229
L
Language
display
(vehicles with steering wheel
buttons)
. . . . . . . . . . . . . . . . . . . . . 100
Lashing eyes . . . . . . . . . . . . . . . . . . 158
mounting
. . . . . . . . . . . . . . . . . . . . 161
permissible tensile load
. . . . . . . . . 371
Lashing eyes/rails
. . . . . . . . . . . . . 158
Lashing points
maximum load-bearing capacity
. . 371
Lashing points and aids
. . . . . . . . . 158
permissible tensile load . . . . . . . . . 371LATCH type child restraint system
. 39
License plate lamp
. . . . . . . . . . . . . 309
changing bulbs
. . . . . . . . . . . . . . . . 312
Light-alloy wheels . . . . . . . . . . . . . . 243
Lighting
changing bulbs
. . . . . . . . . . . . . . . . 306
exterior – see Exterior lighting
instrument
. . . . . . . . . . . . . . . . . . . . 85
interior, front . . . . . . . . . . . . . . . . . . 80
interior, rear . . . . . . . . . . . . . . . . . . . 82
Lights
automatic headlamp control
. . . . . . 78
front foglamp indicator lamp . . . . . . 77
headlamp flasher
. . . . . . . . . . . . . . . 77
low-beam headlamps
. . . . . . . . . . . . 77
reading lamp
. . . . . . . . . . . . . . . . . . 81
rear foglamp indicator lamp
. . . . . . . 77
Limit speed
flat tire
. . . . . . . . . . . . . . . . . . . . . . 333
Load distribution
. . . . . . . . . . . . . . . 158
Loading guidelines . . . . . . . . . . . . . 156
Locator lighting
setting (vehicles with steering wheel
buttons)
. . . . . . . . . . . . . . . . . . . . . 103
Locking button (key)
. . . . . . . . . . . . . 53
Locking knob
. . . . . . . . . . . . . . . . . . . 55
Low-beam headlamps
. . . . . . . . 77
, 307
automatic headlamp control
. . . . . . 78changing bulbs
. . . . . . . . . . . . . . . . 307
constant headlamp mode
(vehicles with steering wheel
buttons)
. . . . . . . . . . . . . . . . . . . . . 102
driving abroad
. . . . . . . . . . . . . . . . 180
M
Magnetic door retainer
. . . . . . . . . . . 61
Malfunction memory
(vehicles with steering wheel
buttons)
. . . . . . . . . . . . . . . . . . . . . . . 95
Maximum engine speed
. . . . . . . . . . 85
Maximum load rating, tires . . . . . . 229
Maximum loaded vehicle weight,
tires
. . . . . . . . . . . . . . . . . . . . . . . . . 229
Maximum roof load
. . . . . . . . . . . . . 372
Maximum speed
programmed
. . . . . . . . . . . . . . . . . . 180
Menu (vehicles with steering wheel
buttons)
audio
. . . . . . . . . . . . . . . . . . . . . . . . 94
malfunction memory
. . . . . . . . . . . . 95
operation
. . . . . . . . . . . . . . . . . . . . . 93
overview . . . . . . . . . . . . . . . . . . . . . . 91
settings . . . . . . . . . . . . . . . . . . . . . . 96
telephone . . . . . . . . . . . . . . . . . . . . 107
trip computer
. . . . . . . . . . . . . . . . . 106
LM K