bulb DODGE VIPER 2004 ZB / 2.G User Guide
[x] Cancel search | Manufacturer: DODGE, Model Year: 2004, Model line: VIPER, Model: DODGE VIPER 2004 ZB / 2.GPages: 236, PDF Size: 4.18 MB
Page 188 of 236

NOTE:On vehicles equipped with High Intensity Dis-
charge Headlights (HID), when the headlights are turned
on there is a blue hue to the lights. This diminishes and
becomes more white after approximately 10 seconds, as
the system charges.
High Intensity Discharge Headlights (HID)
The headlights are a type of high voltage discharge tube.
High voltage can remain in the circuit even with the
headlight switch off and the key removed.Because of
this, you should not attempt to service a headlight bulb
yourself. If a headlight bulb fails, take your vehicle to
an authorized dealer for service.
WARNING!
A transient high tension occurs at the bulb sockets of
High Intensity Discharge (HID) headlights when the
headlight switch is turned ON. It may cause serious
electrical shock or electrocution if not serviced prop-
erly. See your authorized dealer for service.
NOTE:If High Intensity Discharge (HID) lights are not
working, recycle the headlight switch 4 times to see if it
will restrike.
188 MAINTAINING YOUR VEHICLE
Page 189 of 236

Tail, Tail/Stop, and Marker Lamp Bulb
Replacement
1. Open the trunk. Remove two access panel fasteners.
Remove the access panel.
2. Twist sockets counter-clockwise to pull out bulbs.
Replace tail, tail/stop, or marker lamp bulb.3. Reinstall the appropriate bulb and socket assembly.
Replace the access panel. Close the trunk.
MAINTAINING YOUR VEHICLE 189
7
Page 190 of 236

Backup and Rear Turn Signal Lamp Bulb
Replacement
1. Open the trunk. Remove two access panel fasteners.
Remove the access panel.2. Remove three plastic nuts from the upper lamp assem-
bly.
190 MAINTAINING YOUR VEHICLE
Page 191 of 236

3. Twist sockets of the three bulbs shown counter-
clockwise. Disconnect bulb and socket assemblies from
the upper lamp assembly. Pull the upper lamp assembly
clear in order to access backup and rear turn signal lamp
bulbs.
MAINTAINING YOUR VEHICLE 191
7
Page 192 of 236

4. Replace the backup or rear turn signal lamp bulb.
Reinstall the appropriate bulb and socket assembly. Re-
install the three bulb and socket assemblies in the upper
lamp assembly. Reinstall the upper lamp assembly. Re-
place the access panel. Close the trunk.
192 MAINTAINING YOUR VEHICLE
Page 193 of 236

License Plate Light
Twist off sockets counter-clockwise and pull out bulbs.
Replace as required.
Headlight Aiming
The headlights on your new Viper were aimed at the
factory. The factory setting was made at a no load setting.
A great increase in weight will change the aiming and it
may be necessary to readjust the headlights if you
typically carry an excessive amount of weight in the
trunk or otherwise suspect misalignment.
MAINTAINING YOUR VEHICLE 193
7
Page 227 of 236

Body Damage.......................... 178
Body Mechanism Lubrication............162,163
Body Mechanisms....................... 164
B-Pillar Location........................ 112
Brake, Parking.......................... 102
Brake System........................104,171
Anti-Lock........................... 104
Fluid Check.......................... 173
Master Cylinder....................... 174
Warning Light......................... 79
Break-In Recommendations, New Vehicle.....46,107
Bulbs, Light............................ 186
Capacities, Antifreeze (Engine Coolant)........ 195
Capacities, Fluid......................195,196
Capacity, Cargo Weight................... 130
Caps, Filler
Power Steering........................ 161
Car Washes............................ 179Carbon Monoxide Warning................. 47
Cargo Compartment
Capacity............................ 130
Carpeting............................. 179
Catalytic Converter...................... 153
CD Player............................82,85
Chains, Tire............................ 125
Charging System Light..................... 78
Checks, Safety........................... 47
Child Restraint.......................... 33
Child Restraint Tether Anchors............... 36
Circuit Breakers......................... 180
Clean Air Gasoline....................... 127
Climate Control.......................... 90
Clock................................. 81
Compact Disc Maintenance................. 89
Compact Spare Tire...................... 120
Contract, Service........................ 218
Converter, Catalytic...................... 153
INDEX 227
10
Page 231 of 236

Light Bulbs............................ 186
Lights................................. 60
Airbag.............................41,79
Anti-Lock Warning...................... 75
Back-Up............................. 61
Brake Warning......................... 79
Daytime Running....................... 63
Dimmer Switch, Headlight................ 61
Exterior Check......................... 48
Fog .............................62,64,78
Hazard Warning Flasher...............75,132
Headlight Switch....................... 62
Headlights.........................62,188
High Beam Indicator.................... 77
Instrument Cluster...................... 62
Interior...........................61,186
Lights On Reminder..................... 63
Malfunction Indicator.................... 76
Map Reading.......................... 60Oil Pressure........................... 78
Passing.............................. 65
Reading.............................. 60
Seat Belt Reminder...................... 77
Turn Signal.......................61,64,75
Loading Vehicle
Capacities........................... 130
Tires ............................... 112
Locks
Door................................ 13
Low Tire Indicator....................... 124
Low Tire Pressure System.................. 124
Lower Anchors and Tether for CHildren (LATCH) . 35
Lubricants..........................162,163
Lubrication, Body....................... 162
Maintenance Schedule.................... 200
Light Duty Schedule9B9................. 203
Schedule9A9......................... 210
INDEX 231
10