radio FIAT BARCHETTA 2001 1.G Radio Tape Player And External CD Manual

1Cyan GialloMagenta Nero603.47.453
FM/M/L RDS FUNCTION RADIO, TAPE
PLAYER AND EXTERNAL CD PLAYER
PAGE
INTRODUCTION . . . . . . . . . . . . . . . . . . . 2
USEFUL ADVICE . . . . . . . . . . . . . . . . . . . . 4
DESCRIPTION OF CONTROLS . . . . . . . . 7
OPERATION . . . . . . . . . . . . . . . . . . . . . . . 10
TROUBLE SHOOTING . . . . . . . . . . . . . . . 26
TECHNICAL INFORMATION . . . . . . . . . 28
CONTENTS
1

2Cyan GialloMagenta Nero603.47.453
– Automatic Stereo/Mono selection.
• TAPE SECTION
– Autoreverse
– Tape fast forward and rewind
– Automatic recognition and equalisation of Cr/Me
tapes with consequent optimisation of sound.
– Pause function.
– Last/next track search function.
– Repeat function (repeats last track).
– Blank Skip function.
– Scan tracks on tape (forward) function.
INTRODUCTION
The Fiat barchetta is fitted with a fixed sound sys-
tem presenting the following features:
• RADIO SECTION
– PLLtuning (FM/MW/LWfrequency bands)
– RDS (Radio Data System) withTA(Traffic An-
nouncement) - PTY NEWS(Programme Type
News) - EON(Enhanced Other Network) - REG
(Regional Programme) functions.
– RDSalternative frequency tuning.
– Automatic/manual station tuning.
– Manual storage of 24 stations: 18 in FMband (6
in FM1, 6 in FM2and 6 in FM3) and 6 in MWband.
– Automatic storage (AUTOSTOREfunction) of
6 stations.
– DXfunction (Distant: increased sensitivity in
searching for radio stations).
2

8Cyan GialloMagenta Nero603.47.453
8
DESCRIPTION
OF CONTROLS
1.Audio mode button (A-M)
Loudness button (LOUD)
2.On/Off button (POWER)
Radio, Tape, CD button (FUNC)
3.Volume, treble, fader adjustment button
(up/down) (O/N)
4.Next disc button (DISC UP)[I]
5.Eject tape button (EJECT)(˚) [J]
6.Scan tape/CD (SCAN)[J], [I]
7.Alternative frequency button, RDS REG
function (AF)
8.Repeat tape/CD track button (RPT) [J],
[I]9.Traffic announcement function button, pre-
set volume for TA, ALARM andPTY-
NEWS(TA)[K]
10.Automatic station storage button (AS)[K]
PTY NEWSfunction button
11.Random CDtrack function button (RDM)
[I]
12.Pre-set station button [K]
13.Skip blank tape function button (BLS)[J]
14.Mute sound system (MUTE) [J
], [I]
Play/pause tape/CD (˙/ II) [J], [I]
15.Dolby NR B function button (BNR) [J]
16.Last disc button (DISC DN) [I]

9Cyan GialloMagenta Nero603.47.453
9
KEY
[K]: In radio mode
[J]: In tape player mode
[I]: In CD mode
NOTE:
Various functions and settings can be made by press-
ing the up/down [3] and left/right [18] buttons. This
operation is called the “Alpha-Touch Controller”
function. 17.Band selection button, manual tuning
(BAND) [K]
Change tape side button (PROG) [J]
CD Changer magazine button (MAG) [I]
18.Bass, balance, manual/automatic tuning, dis-
tant/locale search, tape fast forward/reverse,
next/last tape/CD track, CD fast forward/re-
verse buttons (left/right) (Gand H) [J],
[K], [I]

10Cyan GialloMagenta Nero603.47.453
10
OPERATION
MAIN OPERATIONS
IMPORTANTTurn the volume down before
turning the sound system off. Sound quality will be
perfect and the sound system will not be damaged
when you turn it back on.
Turning the sound system on and adjusting the vol-
ume
1.Press the (POWER) button [2] to turn the
sound system on. Press the (POWER) button for at
least one second to turn the sound system off.
2. Press the function button (FUNC)[2] to select
Radio, Tape and CD functions cyclically as follows:
Radio➞Tape ➞CD ➞Radio
The message “NO CASS”will appear if there is
no tape in the player.The message “NO DISC”will appear if there is
no CD in the magazine or if the CD player is not
connected.
3.Press the up/down buttons [3] to adjust the vol-
ume.
N: to turn volume up
O: to turn volume down
Audio adjustments
1. Press the audio mode (A-M) [1] to select the
mode required. The mode changes each time the
(A-M) button is pressed as follows:
BASS / TREB(bass / treble) ➞BAL / FAD(bal-
ance / fader) ➞previous mode.
2. Adjust bass and treble with the left/right and the
up / down buttons [18], [3].

G: Decrease bass
H: Increase bass

11Cyan GialloMagenta Nero603.47.453
11
Mute
This function will automatically turn the volume
down to zero.
Press the MUTE[14]. The sound will disappear
and the message “MUTE” will appear on the dis-
play. Press the MUTEbutton again to turn the func-
tion off.
This function is operating in “cassette” or “com-
pact disc” modes only.
RADIO FUNCTIONS
Listening to the radio
1. Press the function button (FUNC) [2] to select
radio mode.
Press the BANDbutton [17] to select the recep-
tion band FM (FM1, FM2, FM3) ot AM (MW /
LW). The band will change each time the button is
pressed as follows:
N: Increase treble
O: Decrease treble
3.Adjust balance and fader with the left/right and
up / down buttons [18], [3].

G: Increase left speaker sound
H: Increase right speaker sound

N: Increase front speaker sound
O: Increase rear speaker sound
Loudness
Keep the loudness button (LOUD)[1] pressed
for longer than 2 seconds to activate/deactivate this
function. The message“LD”will appear on the dis-
play when the function is on.

14Cyan GialloMagenta Nero603.47.453
OPERATION
14
RDS FUNCTIONS
RDS (Radio Data System)
The radio must be tuned toFMto access the RDS
functions.
The RDS system gives you automatic tuning to the
optimal frequency of the RDS-enabled stations being
listened to (AFfunction). You can therefore contin-
ue to listen to the station without having to alter the
frequency when you change the area. Obviously the
station you are listening to must be picked up in the
area you are travelling through.
If the signal is very weak and/or if the reception is
bad, the sound system will mute for a few seconds
while seeking an alternative frequency for the sta-
tion. If this occurs frequently, we recommend turn-
ing the AFfunction off.If an RDSstation can non longer be picked up in
your current position and the AFfunction is on, the
message AFon the display will flash. As soon as cor-
rect reception is restored, “AF”will stop flashing.
The RDS will also display the name of the station
you are listening to (PSfunction).
Alternative frequency search (AF function)
Press the AFbutton [7] to activate/deactivate the
function. When the function is on, the message AF
will appear (or flash) on the display.
If reception worsens, the message “AF”will start
flashing and the device will attempt to tune to an al-
ternative frequency. If the switch-over is not possi-
ble, the message “SEARCH”will appear on the
display and the sound system will tune to the current
station before starting the search.

15Cyan GialloMagenta Nero603.47.453
15
1.Press one of the pre-set buttons [12] to recall a
regional station.
2. If the station reception is not optimal, press the
same pre-set button [12] and the radio will tune to
a regional station.
TA (Traffic Announcement) function
With this function, you can:
– Automatically search only the FM-RDS stations
enabled to broadcast traffic announcements. The
message “TP”will appear on the display when you
are tuned to one of these stations.
– Receive traffic announcements while you are lis-
tening to a tape or CD. REG function (regional programmes)
The REGfunction can only be used when the AF
function is on.
The REGfunction (regional programmes) tunes to
local (regional) stations only. Press the AF button [7]
for longer than 2 seconds to turn the function on/off.
The message “REG”will appear on the display
when the function is on.
If you are listening to a regional station and the
function is off, the regional station of the new area
will be picked up as you change area.
The REGfunction is not active when receiving a
national station.
Manual tuning to regional stations
This function is available only when regional sta-
tions are received, with AFfunction on and RDS
function off. Follow this procedure:

16Cyan GialloMagenta Nero603.47.453
OPERATION
16
To start the function, press theTAbutton [9]. If
the initial station is not enabled to provide traffic an-
nouncements (the message “TP”will not appear on
the display), the radio will automatically tune to the
closest station broadcasting traffic announcements
and the message “TA” will appear on the display.
Note: If no RDS TA stations can be received, the
system will continue the search indeterminately. To
stop the search, press the TAbutton [9] again.
If, on the other hand, a station has been found, the
system will turn to TAstand-by until the traffic an-
nouncement starts. In this case, the message TRA
INFOfollowed by PS(Programme Service name)
will appear on the display.
The playback of a CD or tape will be interrupted
to allow to listen to traffic announcements broadcast
by an RDS TA station.Press the TAbutton [9] during traffic announce-
ment broadcasting to stop listening to the an-
nouncement and the system will return to TA
stand-by mode.
To memorise stations with the TPfunction on,
follow the storage procedure described in the para-
graph “Manual station storage”.
Alternatively to manual storage, press the AS but-
ton [10] for 2 seconds or more to automatically
store the stations with the TP function on (see “Au-
tomatic storage”).
To turn the function off, press the TAbutton [9]
again.
EON (Enhanced Other Network) function
Circuits grouping stations enabled to broadcast
traffic announcements (NEWS) are available in
some countries.

18Cyan GialloMagenta Nero603.47.453
OPERATION
18
Pre-setting TA, emergency (ALARM) and
PTY-NEWS functions volume
You can adjust the volume for TA, ALARMand
PTY-NEWSfunctions as required.
During TA, ALARMand PTY-NEWS broad-
casts, the sound system volume will automatically
adapt to the pre-set volume level.
The factory setting is TA VOL 9.
Volume will not change if it is set to a higher level
duringTA, ALARM and PTY-NEWSbroadcasts.
If it is set to a level, it will change to the volume set
with the following procedure:
1. Press theTA button [9] for more than 2 sec-
onds. If the volume is not adjusted within the follow-
ing 7 seconds, the display will automatically return to
radio mode.
2.To adjust the volume, use the up/down buttons
[3].3. Press the TAbutton [9] to end the procedure.
TAPE PLAYER OPERATION
Insert a tape in the desk facing rightwards. Play-
back will start automatically.
Correct equalisation of the player will be per-
formed according to the type of tape used (e.g.
chromium or metal tapes).
At the end of the tape, the other side of the tape
will be played automatically.
To change tape side before the end, press the
PROG button [17].