steering FIAT DOBLO 2009 2.G Blue And Me Manual
[x] Cancel search | Manufacturer: FIAT, Model Year: 2009, Model line: DOBLO, Model: FIAT DOBLO 2009 2.GPages: 82, PDF Size: 1.33 MB
Page 15 of 82
14
SOUND SYSTEM CONTROLS
The
N/O/¯/˙buttons on the front of
the sound system activate the following
in Media Player mode:
NOSelect previous/next folder/artist/
genre/album depending on the se-
lection mode enabled
¯˙Play previous/next track
VOICE COMMANDS
You do not need to alter your normal dri-
ving position for your voice commands to
be recognised by the system. In fact, the
microphone is correctly positioned and di-
rected for this purpose.
The words that are recognised by the sys-
tem are identified as voice commands.
The hands-free system recognises and re-
sponds to a preset list of voice commands.
The list of voice commands available de-
pends on the point you are at in the hands-
free system menu. The list of voice com-
mands available is accessible at any time by
pressing
‘and saying “Help”, or by say-
ing “Help” after a message from the sys-
tem. Blue&Me™also recognises per-
sonalised voice commands, such as, for ex-
ample, the names in your contacts.To use the voice commands, the voice
recognition system does not need time to
learn your voice.
To give the system a voice command,
press
‘and wait for the audible signal in-
dicating that the voice recognition system
is activated; you can now give the com-
mand in your normal voice – not too
quickly, but without hesitation. When the
system recognises the command, it will re-
spond or perform an action.
The voice commands are divided into lev-
el 1, level 2 and level 3.
When a valid* level 1 voice command is
given, the system is ready to recognise lev-
el 2 voice commands; when a valid level
2 voice command is given, the system is
ready to recognise level 3 voice com-
mands.
* Validmeans that the voice command is part of the Blue&Me™vocabulary and therefore recognisable at a given level.
USING Blue&Me™
STEERING WHEEL CONTROLS
The steering wheel controls (see fig. 1)
are for the hands-free functions, activat-
ing voice recognition, the Media Player
functions or selecting an option from the
Blue&Me™menu.
Some commands have different functions
in relation to the status of the system at
a given moment.
The function selected in response to the
pressing of a button depends, in some cas-
es, on how long the button is held down for.
For more information, see the DISPLAY
AND STEERING WHEEL CONTROLS
section.
N.B.
Instructions on using the system through
manual controls are shown in the text by
the symbol
?.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 14
Page 18 of 82
17
DISPLAY
The various options in the Main Menu of
Blue&Me™are displayed on the multi-
function instrument panel display and the
sound system (see fig. 1).
Different types of information are dis-
played:
❒Status of the mobile phone connected
via Bluetooth®technology:
❒;indicates that Blue&Me™is connect-
ed to a mobile phone with Bluetooth®.
❒NO BLUETOOTH– indicates that
the connection with the mobile phone
is broken (versions with multifunction
display)
❒Name of your mobile phone network
provider (if not available, “- - - - -” is
displayed).
❒Information relating to the receipt of an
SMS message, the phone number or the
name (if stored in the phonebook) of the
sender of the message.
❒Information relating to the audio track
that is being played via the Media Player.
❒Information relating to the active
Blue&Me™function or the selected
menu option.
❒The sound system display will show in-
formation relating to the audio track be-
ing played via the Media Player.AUDIO
Blue&Me™audio (hands-free, Media Play-
er, vocal announcements, audible signals)
is played over your vehicle's sound system.
For this reason, any sound system audio is
suspended for as long as is necessary.
The audio volume can always be adjusted
by using the sound system controls or the
steering wheel controls.
The sound system display shows specific
messages to notify you that the sound sys-
tem is being used by Blue&Me™.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 17
Page 19 of 82
18
Launching the Main Menu
To activate the Blue&Me™Main Menu,
press
ß/MENUthen interact with the sys-
tem by using the steering wheel controls.
Navigating through menu options
To navigate through menu items, press
NorO.
In the display of contact names, if the num-
ber of characters exceeds the maximum
allowed, the name is truncated.
To select the option shown on the display,
press SRC/OKor
ß/MENU.
To exit the item shown on the display or
a sub-menu, press
&/ESC. Blue&Me™ FUNCTIONS MENU
The Main Menu of Blue&Me™displays
the options in a list that appears on the in-
strument panel multifunction display. The
Blue&Me™system settings can be
changed or the functions activated by using
the available options.
The Main Menu includes the following op-
tions:
❒CALL LOG – a list of recent calls, made
or received, can be viewed through this
sub-menu. This list is either downloaded
from your mobile phone's memory, up-
dated during hands-free use or obtained
from both operations.
❒CONTACTS– this sub-menu allows
you to view the numbers in your phone-
book and select one to make a call. If
your phonebook contains a lot of names,
they will be grouped in alphabetical sub-
menus. The amount of phone numbers
contained in a sub-menu depends on the
number of names in your phonebook.
❒SMS MESSAGE READER
(only with compatible
mobile phones)
This sub-menu allows you to read the last
text message received, call the sender of
the message or delete it.
You can store up to 20 text messages
in a dedicated inbox and listen to them
later, call the sender or delete them.
You can also set the notification meth-
ods for received SMS messages.
❒MEDIA PLAYER– this sub-menu al-
lows you to select the digital audio
tracks in your library by folder, artist,
genre, album or playlist. You can always
select and play tracks using this sub-
menu.
IPod player– see dedicated paragraph.
❒SETTINGS– this sub-menu allows you
to manage the names in your phone-
book, register a new device or access
the identification code for the hands-free
system.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 18
Page 20 of 82
19
Blue&Me™allows you to make and re-
ceive calls using your mobile phone
equipped with Bluetooth
®technology,
using voice recognition or steering wheel
controls.
You can use voice commands to phone
your contacts by saying their name and/or
surname, or you can phone numbers that
are not stored, by saying the number out
loud, or you can call the sender of a re-
ceived text message.
With the steering wheel controls, you can
phone the names in your phonebook or
bring up your call log by selecting the name
you want in the sub-menu CALL LOG
or CONTACTS.
Furthermore, you can respond to in-
coming calls, redial an engaged number,
receive a call alert, read an SMS message
or delete it.
If you have any difficulties using the tele-
phone functions through the vehicle's
hands-free system, see the TROU-
BLESHOOTING – HANDS-FREE section.
N.B.
❒Before you can make and receive tele-
phone calls with the hands-free system,
you need to register your mobile phone
on the system.
For more information, see the SET-
TINGS – REGISTERING YOUR MOBILE
PHONE section.
❒To activate the vehicle's hands-free sys-
tem, the igntion key must be turned to
MAR.
❒If you turn the ignition key to STOP
during a phone conversation, you can
continue the conversation for another
15 minutes via the hands-free system.MAKING A CALL
A call can be made in one of the follow-
ing ways:
❒Call a name in the phonebook
❒Call a number using voice commands
❒Call a number using the mobile phone
keypad
❒Call a number from your call log
❒Call the sender of a received SMS mes-
sage
For more information, refer to the SMS
MESSAGE READER FUNCTIONS –
MANAGING SMS messages chapter.
HANDS-FREE FUNCTIONS
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 19
Page 25 of 82
24
Transferring a call from
the hands-free system
to your mobile
To transfer a phone conversation from the
hands-free system to your mobile phone,
press SRC/OK.
You can talk on your mobile and continue to
use the steering wheel controls. In particu-
lar, if you have more than one active con-
versation, you can press
ß/MENUto switch
from one phone call to the other;
press
ß/MENUfor more than one second
to end the conversation.Putting a call on hold
To put an ongoing phone call on hold and
disable the microphone so that the other
person cannot hear you, press
&/ESC. TELECONFERENCING
(only for phones with Bluetooth
®
that support this function)
The conference call function allows you to
make a phone call to a third person dur-
ing an active call. You can speak to both
people at the same time.
To activate a teleconference, make the
new call while you already have a call un-
der way by following the procedure de-
scribed in the MAKING A CALL section.
When the Teleconferencing function is
active, the display will read “CONFER-
ENCE”.
Once the conference is activated, hold-
ing down the
ß/MENU button will end
both calls.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 24
Page 30 of 82
29
MANAGING
THE MULTIMEDIA
LIBRARY
The Media Player allows you to select the
digital audio from your USB device, using
voice recognition, steering wheel controls
or sound system controls.
You can scroll through the audio files by
folder, artist, genre, album or playlist. You
can use voice recognition to choose one
of these categories. Once you have se-
lected the category that you want, use the
manual controls to select a file.
To facilitate exploration of your multime-
dia library, enter the multimedia informa-
tion (title, author, album, genre) relating to
each track.
N.B.
Not all formats allow multimedia infor-
mation to be entered. Among the formats
recognised by Blue&Me™, .mp3, .wma
and.aacinclude multimedia information,
whilst .wavdoes not. It may also be the
case that multimedia information has not
been entered in an audio file that allows
it. In these cases, you can only scroll
through audio files by folder.
For more information, refer to the
SUGGESTIONS FOR USING MEDIA
PLAYER section.Selecting a folder
If your USB device has folders containing
tracks, these will appear in the FOLD-
ERSmenu.
?
To manually select tracks from the
folders, proceed as follows:
Activate the Main Menu, select the
MEDIA PLAYERoption and then
press SRC/OK or
ß/MENU.
Select the FOLDERSoption and
then press SRC/OKor
ß/MENU.
Scroll through the available folders.
To listen to the entire contents of the
folders, select thePLAY ALLop-
tion, then press SRC/OKor
ß/MENU. To display all the tracks
in the selected folder, press SRC/OK
or
ß/MENU.
Scroll through the tracks contained
in the folder you have selected.
To play a track, select the title and
press SRC/OKor
ß/MENU.
}
Or, with voice interaction:
Press
‘and say “Folders”.
Scroll through the available folders.
To listen to all the tracks in the fold-
ers, select the PLAY ALLoption,
then press SRC/OKor
ß/MENU.
To display all the tracks in the se-
lected folder, press SRC/OKor
ß/MENU.
Scroll through the tracks contained
in the folder you have selected.
To play a track, select the title and
press SRC/OKor
ß/MENU.
For more information on how to
customise the FOLDERSmenu, re-
fer to the SUGGESTIONS FOR US-
ING THE MEDIA PLAYER section.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 29
Page 34 of 82
33
Stop
To stop playing a track: say “Stop”.
Next track
?
To manually move to the next track:
Whilst listening to a track, press
N(steering wheel controls) or ˙(sound system controls).
}Or, with voice interaction:
When listening to a digital track,
press
‘and say “Next”.
Previous track
?
To manually go back to the
previous track:
Whilst listening to a track press
O(steering wheel controls) or ¯(sound system controls).
}
Or, with voice interaction:
When listening to a digital track,
press
‘and say “Previous”.
N.B.
If the command “Previous track” is given
(either vocally or manually) after the first
three seconds of the track, the same track
will be heard again. If the command is giv-
en during the first three seconds of the
track, the previous track will be heard.Change audio source
To change the active audio source (radio,
CD, CD changer, Media Player), press
SRC/OKor the appropriate buttons on
the front of the sound system (see rele-
vant manual).
N.B.
For further information on the voice com-
mands that can be used with the player,
see the LIST OF AVAILABLE VOICE
COMMANDS section.
To manage audio files from iPod or
iPhone devices, refer to the TECHNOL-
OGY COMPATIBLE WITH Blue&Me™
section.MEDIA PLAYER SETTINGS
Automatic play
With the Automatic playfunction, you
can set Blue&Me™so that the digital au-
dio on your USB device begins to play as
soon as you turn the ignition key to MAR.
Once you select this function, your music
will start playing automatically the first time
that you use the player.
If you want to turn Automatic playoff,
do so before inserting the device into the
vehicle's USB port and creating or updat-
ing the multimedia library.
?
To manually change the Auto-
matic playsetting:
Access the Main Menu, select
ME-
DIA PLAYER, SETTINGS, AU-
TO PLAYand then press SRC/OK
or
ß/MENU.
To turn on Automatic play,
choose ONand press SRC/OKor
ß/MENU. To switch off Auto -
matic play, choose OFFand press
SRC/OKor
ß/MENU.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 33
Page 37 of 82
36
The SETTINGSmenu gives you the fol-
lowing choices:
❒Register a mobile phone
❒Manage user data
❒Advanced options.
To operate within the Settingsmenu
when the car is stationary, you can use
either the steering wheel controls or voi-
ce commands. When the car is moving,
you can use only voice commands. In-
structions for both methods follow.
IF YOU HAVE SOME DIFFICULTIES
USING THE BLUE&ME™ settings func-
tions, see the TROUBLESHOOTING
section.REGISTERING A MOBILE PHONE
In order to use your mobile phone with
the vehicle's hands-free function, it must
be registered.
During the registration process, the
hands-free system searches for a phone
with Bluetooth
®technology in its re-
ception range. If it finds one, it establish-
es a connection with it by using a Person-
al Identification Number (PIN). After you
have registered your mobile phone on the
system, you can use it with the hands-free
system.
IMPORTANT The PIN code used for reg-
istering a mobile phone is produced ran-
domly by the system each time a new
phone is registered, therefore you do not
need to remember it. If you lose it, you
can still use the hands-free system.
You only need to register your phone
once; after that, Blue&Me™will auto-
matically connect to it every time you get
in the vehicle and turn the ignition key to
MAR.You can register your mobile phone by
choosing REGISTRATIONin the SET-
TINGSmenu.
?
To perform the registration manu-
ally, proceed as follows:
Activate the Main Menu by pressing
ß/MENUand select SETTINGS
by pressing SRC/OKor
ß/MENU.
Select REGISTRATIONand then
press SRC/OKor
ß/MENU. The
system begins the registration
process.
The system displays the PIN code
necessary for registering the mobile
phone on the instrument panel and
repeats it out loud. It is important
to know that this PIN is only used
for registering the mobile phone; it
is not your SIM card PIN.
For the next two stages, consult your
mobile phone manual on how to reg-
ister and connect with Bluetooth
®
devices.
SETTINGS
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 36
Page 46 of 82
45
USB STORAGE DEVICES
The Media Player is compatible with most
USB 1.0, 1.1 or 2.0 mass storage devices.
MANAGING AUDIO FILES FROM
iPod DEVICES
To optimise the connection of your iPod
with Blue&Me™, you should carry out a
few simple operations on your iPod:
❒configure the iPod for use as an external
disc, referring to the iPod user manual;
❒if the configuration has been made on
an Apple computer, configure it in
Windows;
❒save the music tracks as audio files
compatible with Blue&Me™.
These operations do not compro-
mise the sound quality or usability of
iPod tracks.What I can do
❒Listen to tracks in digital quality
❒Select tracks (by artist, album, genre,
etc.) through voice control or by us-
ing the steering wheel controls
❒Display information about the track be-
ing played (song title, singer, etc.) on the
instrument panel.
❒Recharge the iPod through the USB
port.
What I cannot do
❒Play audio tracks from iPod devices not
configurable as external disks or
iPhones (without Blue&Me™Media
Player adapter, see Note below).
N.B.
A Blue&Me™ Media Player adapter is
available from Lineaccessori Fiat, allow-
ing you to play music tracks from iPod or
iPhone models that cannot be configured
as an external disk.N.B.
USB devices with a password function are
not recommended. If your USB device has
such a function, always check that it has
been deactivated.
The Media Player has only one multime-
dia library. When a new USB device is in-
serted, Blue&Me™creates a new library
to replace the existing one.
COMPATIBLE USB STORAGE DEVICES
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 45
Page 72 of 82
71
Problem Probable cause Possible solution
With an iPod or USB memory stick,
the system continues playing the same
track and you need to press
the “forward” button to move
onto the next track
The battery of the iPod connected
to Blue&Me™is flat
The menu contains a specific item,
such as “Continuous play” or
“Repeat track”, that must be disabled.
To deactivate:
❒press the controls activation button
on the steering wheel
❒when prompted by the system, say
clearly “DEACTIVATE REPEAT
TRACK”
❒wait for voice confirmation from
the system, which will say
“REPEAT TRACK DEACTIVATED”
Remember that your iPod must have
some charge, or wait a few minutes
until the system recharges it The repeat single track function
may have been activated inadvertently
The vehicle, with the ignition key
turned to MAR, recharges the iPod
device unless the battery is
completely flat
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:56 Pagina 71