open bonnet FIAT DOBLO 2009 2.G Owners Manual
[x] Cancel search | Manufacturer: FIAT, Model Year: 2009, Model line: DOBLO, Model: FIAT DOBLO 2009 2.GPages: 274, PDF Size: 6.6 MB
Page 92 of 274
91
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0V0047mfig. 93
BONNET
Opening figs. 93-94-95
Proceed as follows:
❒pull lever A-fig. 93 in the direction indicated by the ar-
row;
❒release catch B-fig. 94, lift the bonnet and, at the same
time, release the support rod C-fig. 95 from its lock-
ing device D-fig. 95, then insert the end of the rod in-
to housing E-fig. 95 of the bonnet (bigger hole) and push
into the safety position (smaller hole), as shown in the
diagram.
If the supporting rod is not positioned cor-
rectly, the bonnet may fall violently. On-
ly perform these operations when the vehicle is
stationary.
WARNING
Page 93 of 274
F0V0048mfig. 9492
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
Before opening the bonnet, check that
windscreen wiper arm is not lifted from the
windscreen.
WARNING
When the engine is warm, work carefully
inside the engine compartment to avoid
getting burnt. Keep your hands away from the fan:
it may turn on even with key removed from the
switch. Wait for the engine to cool down.
WARNING
Pay attention to scarves, ties and other
loose-fitting garments. If they accidental-
ly come into contact with moving parts, they may
get caught up and dragged with serious risks for
those wearing them.
WARNING
Page 94 of 274
93
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
Closing fig. 95
Proceed as follows:
❒Hold the bonnet up with one hand and, with the oth-
er, remove rod C from housing E and fit it back into its
catch D;
❒Lower the bonnet to approximately 20 centimetres
from the engine compartment and let it drop. Make
sure that the bonnet is completely closed and not on-
ly fastened by the safety catch by trying to open it. If
it is not perfectly closed, do not try to press the bon-
net down but open it and repeat the procedure.
For safety reasons, the bonnet must al-
ways be perfectly closed while travelling.
Make sure that the bonnet is perfectly closed and
that the lock is engaged. If you discover whilst dri-
ving that the lock is not fully engaged, stop im-
mediately and close the bonnet in the correct
manner.
WARNING
F0V0049mfig. 95
Page 109 of 274
108
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0V0042mfig. 106F0V0043mfig. 107
EMERGENCY STARTING fig. 107
When jump starting, never connect the negative lead (-)
of the auxiliary battery to the negative pole C of the ve-
hicle battery, but rather to either the false pole B or to
an engine/gearbox earth point.
WARNINGS
VEHICLE INACTIVITY fig. 106
If the vehicle is inactive, special care must be taken to dis-
connect the battery electrical power supply. This proce-
dure is carried out by disconnecting the rapid release neg-
ative terminal A from the negative false pole B because
there is a battery status monitoring sensor D at the neg-
ative battery pole C which should never be disconnected
except if the actual battery is replaced.
When replacing the battery, always go to
the Fiat Service Network. Replace the bat-
tery using a new one of the same type and spec-
ifications.
WARNINGBefore opening the bonnet, make sure
that the vehicle is switched off and the key
is in the OFF position. Follow the instructions on
the dedicated plate on the front crossmember. It
is advisable to extract the key when there are oth-
er people in the vehicle.
WARNING
Page 221 of 274
220
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0V0118mfig. 190F0V0117mfig. 192
F0V0116mfig. 191
ENGINE MARKING
This is printed onto the cylinder block and shows the type
and production serial number. BODYWORK PAINT IDENTIFICATION
PLATE fig. 190
This plate is fitted inside the bonnet and contains the fol-
lowing information:
A Paint manufacturer.
B Colour name.
C Fiat colour code.
D Re-spray and touch-up colour code.
CHASSIS MARKING fig. 191-192
These are located respectively:
– on the passenger compartment floor panel, near the right
front seat; open flap A-fig. 191 to access
– on the lower part of the windscreen B-fig. 192
The marking includes:
❒vehicle model;
❒chassis number.
Page 262 of 274
261
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
Automatic climate
control .................................. 51
Battery
– jump starting .................. 155
– maintenance ................... 208
– replacement .................... 207
– tips for extending life .... 208
Body marking ...................... 220
Body paintwork
identification plate............. 220
Bodywork codes ................ 221
Bodywork versions ............. 221
Bodywork
– bodywork version
codes ................................ 221
– cleaning, care and
maintenance ................... 214Bonnet
– opening/closing ..... 91-92-93
Boot courtesy light ............... 67
Boot ......................................... 85
– expanding the boot ......... 89
– parcel shelf (removal) ...... 88
– removing the parcel
shelf .................................... 88
– securing your load ............ 90
Boot
– emergency opening from
the inside.........................85-86
– expanding the boot .......... 89
– opening with remote
control................................... 6
– securing your load ............ 91
Brake Assist system............... 98
Brake fluid
– specifications................... 248 ABS system ............................ 96
ABS .......................................... 96
Additional brake light
– bulb replacement ........... 176
Adjusting the mirrors .... 40-41
Adjusting the seats ............... 30
Adjusting the vehicle’s
interior lighting .................... 20
Air filter ................................ 206
Air recirculation ........ 46-49-56
Air vents ................................. 43
Airbag deactivation ............ 130
Antifreeze
– checking levels and
topping up ....................... 202
– specifications .................. 248
Ashtray .................................... 75
ASR (system) ....................... 100
INDEX
Page 265 of 274
264
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
– remote locking/
unlocking ............................. 6
DPF (particulate filter)........ 114
Electrical/electronic
devices ................................ 110
Emergency starting ............. 155
– bump starting ................. 156
– jump starting .................. 155
End of vehicle life ............... 255
Engine codes ........................ 221
Engine compartment
– checking fluid levels ...... 199
– opening/closing
the bonnet.......................... 91
– washing ............................ 216
Engine coolant
temperature gauge ............. 13
– type of coolant ............... 248
Engine coolant
– checking levels
and topping up ............... 202– specifications................... 248
– temperature gauge
and warning light ............. 13
Engine immobiliser
(Fiat CODE) ........................... 5
Engine marking .................... 220
Engine oil consumption ...... 201
Engine oil
– checking levels
and topping up................ 201
– consumption .................... 201
– specifications................... 247
Engine
– engine immobiliser
(Fiat CODE) ....................... 5
– identification code ......... 221
– marking ............................. 220
– technical
specifications .................. 223
Environment
– features for reducing
emissions ................113-114Environmental protection
...................................113-114
– particulate filter
(DPF) ................................ 114
EOBD (system) ................... 102
ESP (system) .......................... 98
Extending the boot ............... 89
External lights
(switching on) ................ 59-60
Fiat CODE system ................. 4
Fiat CODE ................................ 5
Fix&Go (quick tyre
repair kit) ........................... 163
Flashing (main beams)........... 60
Fluids and lubricants
(specifications) ..........247-248
Fog lights
– bulb replacement ........... 174
– switching on....................... 70
Follow Me Home
(headlight device)................ 60