change time FIAT DOBLO 2009 2.G Radio CD MP3 Manual
[x] Cancel search | Manufacturer: FIAT, Model Year: 2009, Model line: DOBLO, Model: FIAT DOBLO 2009 2.GPages: 34, PDF Size: 0.46 MB
Page 14 of 34
13
INTRODUCTION
FUNCTIONS
AND
ADJUSTMENTS
RADIO
(TUNER)
CD PLAYER
CD MP3
PLAYER QUICK
GUIDE
❒LOUDNESS (LOUDNESS function
on/off);
❒AUDIO DELAY (Acoustic optimisation
for front passengers selection activa-
tion);
❒EQUALIZER (activation and selection
of factory equaliztion settings);
❒USER EQUALIZER (customised equal-
ization setting).
TONE ADJUSTMENT
(bass/treble)
Proceed as follows:
❒use button ▲or▼to set the “Bass”
or “Treble” in the AUDIO menu;
❒press the button ¯or ˙to increase/
decrease the bass or treble settings.
By pressing the buttons briefly there is
a gradual change in steps. By pressing
them down longer, the levels will change
quickly.BALANCING ADJUSTMENT
Proceed as follows:
❒use button ▲or ▼to set the “Balance”
in the AUDIO menu;
❒press button ¯to increase the sound
from the right speakers or the button
˙to increase the sound from the left
speakers.
By pressing the buttons briefly there is
a gradual change in steps. By pressing
them down longer, the levels will change
quickly.
Select the “¯0 ˙” value to set the right
and left audio outputs at the same value. AUDIO ADJUSTMENTS
The functions in the audio menu are dif-
ferent depending on the status activated:
AM/FM/CE/Media Player (only with
Blue&Me™).
Press the AUDIO button briefly to change
the Audio functions. After the AUDIO
button is first pressed, the display will
show the bass level value for the source
activated at that time (e.g. in FM mode the
display will show “FM Bass +2”).
To scroll through the Menu functions use
button ▲or ▼. To change the setting of
the selected function, use the buttons
¯or ˙.
The current status of the function selected
will be shown on the display.
The functions managed by the Menu are:
❒BASS (bass adjustment);
❒TREBLE (treble adjustment);
❒BALANCE (right/left balance adjust-
ment);
❒FADER (front/rear balance adjustment);
604_39_199 Radio Doblo GB 1ed 17-09-2009 11:51 Pagina 13
Page 16 of 34
15
INTRODUCTION
FUNCTIONS
AND
ADJUSTMENTS
RADIO
(TUNER)
CD PLAYER
CD MP3
PLAYER QUICK
GUIDE
*USER EQ SETTINGS function
(equalizer settings only if the USER
setting has been selected)
To set a customized equalizer adjustment,
set either the ▲or ▼
button to User and
press the MENU button.
A graph with 7 bars will appear on the
display, where each bar represents a fre-
quency. Select the bar to adjust using
buttons ¯or ˙; the bar selected will
start to flash and can be adjusted using
buttons ▲or ▼.
Press the AUDIO button again to mem-
orize the setting. The display will show
the source activated at the time followed
by the word User. If the mode is, for ex-
ample, FM, then the display will show
“FM EQ User”.MENU
MENU button functions
Press the MENU button briefly to activate
the Menu function. The display will show
the first menu item that can be adjusted
(AF) (AF Switching On on the display).
To scroll through the Menu functions use
button ▲or ▼
. To change the setting of
the selected function, use the buttons
¯or ˙.
The current status of the function selected
will be shown on the display.
The functions managed by the Menu are:
❒AF SWITCHING (ON/OFF);
❒TRAFFIC INFORMATION (ON/OFF);
❒REGIONAL MODE regional programs
(ON/OFF);❒MP3 DISPLAY (CD MP3 display setting);
❒SPEED VOLUME (automatic volume
control based on speed);
❒EXTERNAL AUDIO (telephone volume
adjustment);
❒RADIO OFF (off mode);
❒SYSTEM RESET.
Press the MENU button again to exit the
Menu function.
IMPORTANT The AF SWITCHING,
TRAFFIC INFORMATION and REGION-
AL MODE adjustments are only possible
on FM.
604_39_199 Radio Doblo GB 1ed 17-09-2009 11:51 Pagina 15
Page 18 of 34
17
INTRODUCTION
FUNCTIONS
AND
ADJUSTMENTS
RADIO
(TUNER)
CD PLAYER
CD MP3
PLAYER QUICK
GUIDE
IMPORTANT In some countries there are
radio stations that do not broadcast traf-
fic information even with the TP function
activated (“TP” in the display).
If the radio is working on the AM band,
when the TA function is activated it will
switch to the last station tuned into on the
FM1 band.
The volume at which the traffic update
is transmitted depends on the reception
volume:
❒listening volume below 5: traffic news
volume 5 (fixed value);
❒listening volume above 5: traffic news
volume equal to listening volume +1.
If the volume is changed during a traffic up-
date, the level will not be shown on the
display; the new level will only be main-
tained during the update.
The display will show the words TRAFFIC
INFORMATION whilst a traffic update is
being received.
The TA function can be interrupted by
pressing any button on the car radio.REGIONAL MODE function
(reception of regional broadcasts)
Some national broadcasters will transmit
regional programs at certain times of the
day (that vary from region to region). This
function makes it possible to tune into lo-
cal (regional) broadcasters automatically
(see EON function paragraph).
If you want the radio to automatically tune
into the regional stations being broadcast
on the network selected, the function
must be activated.
To turn the function on/off, use the but-
tons ¯or ˙.
The current status of the function will ap-
pear on the display:
❒“Regional On”: function activated;
❒“Regional Off”: function deactivated.
If the function is deactivated and you have
tuned into a regional station working in
a given area and you enter a different area,
then the regional station received in the
new area will be broadcast.
WARNING If the AF and REG functions
are on at the same time, once a border be-
tween two regions is crossed, the radio may
not switch correctly to a valid alternative
frequency.MP3 DISPLAY FUNCTION
(Compact Disc MP3 data display)
This function makes it possible to select
the information shown by the display
when listening to a CD containing MP3
tracks.
The function can only be selected if a CD
MP3 is inserted: in this case “MP3 Display”
will appear on the display.
To change the function, use the ¯or ˙
buttons.
The following settings are available:
❒Title (track title, the ID3-TAG
if available);
❒Author (track author, the ID3-TAG
if available);
❒Album (track album, the ID3-TAG
if available);
❒Folder name (folder name);
❒File name (MP3 file name).
604_39_199 Radio Doblo GB 1ed 17-09-2009 11:51 Pagina 17
Page 21 of 34
INTRODUCTION
FUNCTIONS
AND
ADJUSTMENTS
RADIO
(TUNER)
CD PLAYER
CD MP3
PLAYER
20
QUICK
GUIDE
ANTI-THEFT PROTECTION
The radio is equipped with an anti-theft
protection system based on the exchange
of information between the radio and the
electronic control unit (Body Computer)
on the vehicle.
This system guarantees maximum securi-
ty and avoids the secret code having to be
entered every time after the radio power
supply is disconnected.
If the outcome of the check is positive, the
radio will start to work, whilst if the codes
compared are not the same or if the elec-
tronic control unit (Body Computer) is re-
placed, the equipment will notify the user of
the need to enter the password following
the procedure in the paragraph below.Entering the password
When the radio is switched on, if the pass-
word is requested, the display will show
“Radio code” for about 2 seconds followed
by four dashes “- - - -”.
The password is made up of four numbers
from 1 to 6, each corresponding to one
of the dashes.
To enter the first number, press the button
corresponding to the preset stations (from
1 to 6). Enter the other code numbers in
the same way.
If the four digits are not entered within
20 seconds, the display will show “Enter
code - - - -”. This event is not considered
an incorrect entering of the code.
After entering the fourth digit (within
20 seconds), the car radio will start to work.
If an incorrect code is entered, the radio
will emit a sound and the display will show
“Radio blocked/wait” to notify the user
of the need to enter the correct code.
Each time the user enters an incorrect
code, the waiting time will gradually in-
crease (1 min, 2 min, 4 min, 8 min, 16 min,
30 min, 1h, 2h, 4h, 8h, 16h, 24h) up to
a maximum of 24 hours. The waiting time
will be shown on the display by “Radio
blocked/wait”. After the message disap-
pears, the code entering procedure may
be started again.Code card
This document certifies ownership of the
car radio. The Code Card contains the
model of the radio, the serial number and
the password.
IMPORTANT Keep the Code Card some-
where safe so that the authorities can be
supplied with the relevant information
if the radio is stolen.
604_39_199 Radio Doblo GB 1ed 17-09-2009 11:51 Pagina 20
Page 25 of 34
INTRODUCTION
FUNCTIONS
AND
ADJUSTMENTS
RADIO
(TUNER)
CD PLAYER
CD MP3
PLAYER
24
QUICK
GUIDE
EON FUNCTION
(Enhanced Other Network)
In some countries, there are circuits that
group multiple broadcasters that transmit
traffic information together. In this case, the
program of the station that is being listened
to will be temporarily interrupted to:
❒receive traffic information (only with
the TA function on);
❒listen to regional transmissions each
time they are transmitted by one of the
broadcasters in the same circuit. EMERGENCY ALARM
RECEPTION
The radio can receive emergency an-
nouncements in RDS mode in exce ptional
circumstances where dangerous situations
are threatened (earthquakes, floods, etc.)
if these are being transmitted by the
broadcaster tuned into.
This function is activated automatically and
cannot be turned off.
The word Alarm will be shown in the dis-
play during the transmission of an emer-
gency announcement. The volume of the
radio will change during this announce-
ment in the same way as during a traffic
bulletin.STEREOPHONIC
BROADCASTERS
If the incoming signal is weak, the repro-
duction is automatically switched from
Stereo to Mono.
604_39_199 Radio Doblo GB 1ed 17-09-2009 11:51 Pagina 24