belt FORD AEROSTAR 1996 1.G Owner's Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 1996, Model line: AEROSTAR, Model: FORD AEROSTAR 1996 1.GPages: 353, PDF Size: 2.87 MB
Page 36 of 353
34
*
[SR15025(ALL)05/95]
RWARNING
Never leave a child unattended in your
vehicle.
%*
[SR15900(ALL)01/95]
Safety Seats for Children
*
[SR16000(ALL)05/95]
Use a safety seat that is recommended for the
size and weight of the child. Always follow the
safety seat manufacturer's instructions when
installing and using the safety seat.
[SR16005(ALL)08/95]
Most child safety seats can be used in this
vehicle only in vehicle seating positions with
lap/shoulder belts. Any booster-type seat that
places the vehicle's lap belt or shoulder belt
around a shield above and ahead of the child's
hips should not be used in this vehicle. This
type of safety seat could cause injury by tipping
over the front edge of the vehicle seat during a
collision.
*
[SR16010(ALL)08/95]
RWARNING
The following instructions MUST BE
FOLLOWED to reduce risk of injury from
a safety seat tipping too far forward in a
severe crash.
[SR16012(ALL)08/95]
Install forward-facing child safety seats only in
vehicle seating positions equipped with
lap/shoulder belts. Forward-facing convertible
safety seats can be used in the center of the
three-passenger second row bench seat only if a
top tether strap is used. Ford recommends
placing forward-facing safety seats in the second
row and using safety seats with top tether straps
for added protection.
[SR16015(ALL)08/95]
For more information on top tether straps see
Attaching Safety Seats With Tether Strapsin this
chapter.
File:03cpsra.ex
Update:Tue Aug 29 17:35:04 1995
Page 37 of 353
35
*
[SR16025(ALL)08/95]
When installing a child safety seat, be sure to
use the correct safety belt buckle for that seating
position, and make sure the tongue is securely
fastened in the buckle. For a shoulder/lap belt
combination with a sliding tongue, make sure
the retractor is in the automatic locking mode.
*
[SR16090(ALL)07/95]
All child restraint systems are designed to be
secured in vehicle seats by lap belts or by the
lap portion of a lap-shoulder belt.
*
[SR16100(ALL)06/95]
RWARNING
If you do not properly secure the safety
seat, the child occupying the seat may be
injured during a collision or sudden stop.
An unsecured safety seat could also injure
other passengers.
*
[SR16125(ALL)08/95]
RWARNING
Carefully follow all of the manufacturer's
instructions included with the safety seat
you put in your vehicle. If you do not
install and use the safety seat properly,
the child may be injured in a sudden stop
or collision.
File:03cpsra.ex
Update:Tue Aug 29 17:35:04 1995
Page 38 of 353
36
*
[SR16150(ALL)07/95]
RWARNING
Always keep the buckle release button
pointing upward and away from the child
seat, with the tongue between the child
seat and the release button as shown in
the following illustration.
[SR16280(ALL)05/95]
half page art:0032369-A
Safety belt buckle placement for child seats
File:03cpsra.ex
Update:Tue Aug 29 17:35:04 1995
Page 39 of 353
37
[SR25601(ALL)08/95]
Installing Child Safety Seats in
the Front Seat and Rear Outboard
Seating Positions
[SR25650(ALL)08/95]
Your vehicle is equipped with a dual locking
mode retractor on the shoulder belt portion of
the combination lap/shoulder safety belt for the
right front seat passenger and rear outboard
passengers.
[SR25701(ALL)03/95]
If you choose to install a child safety seat or
infant carrier in these seating positions:
[SR25750(ALL)08/95]
1. Position the child seat on the seat of the
vehicle. In the front seat, adjust the vehicle
seat as far rearward as possible.
[SR25801(ALL)08/95]
2. Pull down on the shoulder belt, then grasp
the shoulder belt and lap belt together. See
Figure 1.
[SR25900(ALL)08/95]
half page art:0095072-AFile:03cpsra.ex
Update:Tue Aug 29 17:35:04 1995
Page 40 of 353
38
*
[SR26000(ALL)08/95]
3. While holding the shoulder and lap belt
portions together, route the tongue through
the child seat according to the child seat
manufacturer's instructions. See Figure 2.
Be sure the belt webbing is not twisted, and
insert the tongue into the buckle. See
Figure 3.
[SR26100(ALL)08/95]
half page art:0095073-A
Routing the lap/shoulder belt
File:03cpsra.ex
Update:Tue Aug 29 17:35:04 1995
Page 41 of 353
39 [SR26201(ALL)08/95]
half page art:0011240-B
Buckling the belt
File:03cpsra.ex
Update:Tue Aug 29 17:35:04 1995
Page 42 of 353
40
*
[SR26301(ALL)08/95]
4. Grasp the shoulder portion of the belt and
pull downward until all of the belt is
extracted and a click is heard. At this time,
the retractor is in the automatic locking
mode (child seat restraint mode). See
Figure 4.
[SR26401(ALL)08/95]
half page art:0011241-A
Setting the retractor to automatic locking mode
File:03cpsra.ex
Update:Tue Aug 29 17:35:04 1995
Page 43 of 353
41 [SR26500(ALL)08/95]
5. Allow the belt to retract. Pull up on the
shoulder webbing. A clicking sound will be
heard as the belt retracts. This indicates the
retractor is in the automatic locking mode.
Push down on the child seat while you pull
up on the belt to remove any slack in the
belt. See Figures 5 and 6.
[SR26601(ALL)08/95]
half page art:0011242-AFile:03cpsra.ex
Update:Tue Aug 29 17:35:04 1995
Page 45 of 353
43 [SR26801(ALL)08/95]
6. Before placing the child in the child seat,
forcibly tilt the seat from side to side, and
tug it forward to make sure that the seat is
securely held in place. See Figure 7.
[SR26900(ALL)08/95]
half page art:0011244-A
Checking that the seat is secure
[SR27000(ALL)08/95]
7. Double check that the retractor is in the
automatic locking mode. Try to pull more
belt out of the retractor. If you cannot, the
belt is in the automatic locking mode. See
Figure 8.
File:03cpsra.ex
Update:Tue Aug 29 17:35:04 1995
Page 46 of 353
44 [SR27100(ALL)08/95]
half page art:0011245-BChecking the retractor
*
[SR27201(ALL)05/95]
8. Check to make sure that the child seat is
properly secured prior to each use. If the
retractor is not locked, repeat steps 4
through 7.
*
[SR27205(ALL)05/95]
NOTE: To remove the retractor from automatic
lock mode, allow seat belt to retract
fully to its stowed position and the
retractor will automatically switch back
to the vehicle sensitive locking mode
for normal adult usage.
*
[SR27210(ALL)08/95]
RWARNING
Carefully follow all of the manufacturer's
instructions included with the safety seat
you put in your vehicle. If you do not
install and use the safety seat properly,
the child may be injured in a sudden stop
or collision.
File:03cpsra.ex
Update:Tue Aug 29 17:35:04 1995