brake light FORD ASPIRE 1997 1.G Owners Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 1997, Model line: ASPIRE, Model: FORD ASPIRE 1997 1.GPages: 254, PDF Size: 1.85 MB
Page 12 of 254
9
*
[IS01950(ALL)01/96]
Indicator Lights and Chimes
%*
[IS01975(ALL)03/96]
Safety Belt Warning Light and Chime
[IS01990(ALL)01/96]
one inch art:0030171-B
Safety belt light
[IS02000(ALL)01/96]
This warning light and chime remind you to
fasten your safety belt under the following
conditions:
[IS02100(ALL)04/96]
q
If the safety belt is not buckled when the
ignition is turned to the ON position, the
chime will turn on for four (4) to eight (8)
seconds and the light will illuminate for at
least 60 seconds.
*
[IS02200(ALL)01/96]
q
If the safety belt is buckled while the light is
on and the chime is sounding, both the light
and chime will turn off.
*
[IS02300(ALL)03/96]
q
If the safety belt is buckled before the
ignition is turned to the ON position, neither
the light nor the chime will come on.
%*
[IS02400(ALL)01/96]
Brake System Warning Light
[IS02550(ALL)01/96]
one inch art:0032206-B
Brake system and parking brake light
File:03icisf.ex
Update:Tue Mar 4 08:51:24 1997
Page 13 of 254
10 [IS02600(ALL)04/96]This light illuminates for a few seconds when
you turn the ignition key to START or ON. It
normally goes off shortly after the engine starts
and after you release the parking brake.
However, it may stay on for up to 60 seconds. If
the light doesn't illuminate after the engine is
started, stays on for longer than 60 seconds, or
illuminates after you have fully released the
parking brake, have the hydraulic brake system
checked.
[IS02605(ALL)02/96]
To test the brake warning light, release the
parking brake and turn the ignition key to the
START position. The brake warning light should
illuminate until the key is released.
*
[IS02650(ALL)03/96]
This light will also illuminate if the parking
brake does not release fully. If it does stay on
afterthe parking brake is fully released, it
means there may be a brake problem. Pull off
the road and stop carefully. You may notice that
the pedal is harder to push, the pedal may go
closer to the floor, or it may take longer to stop
the vehicle. Try the brakes again after you have
stopped.
[IS02675(ALL)04/96]
Your vehicle has a divided brake system. If one
part isn't working, the other part can still work
and stop the vehicle. For good braking, you
need both systems working well.
*
[IS02700(ALL)03/96]
WARNING
The BRAKE light indicates that the brakes
may not be working properly. Have the
brakes checked immediately.
File:03icisf.ex
Update:Tue Mar 4 08:51:24 1997
Page 18 of 254
15 %
*
[IS05975(ALL)01/96]
Anti-lock Brake System Warning Light
(If equipped)
[IS06000(ALL)04/96]
When the ignition switch is turned to the ON
position, the anti-lock brake system warning
light illuminates. When the engine is started, the
Anti-lock Brake System (ABS) control unit
determines if all components of the system are
operating correctly. The warning light could
remain on up to 60 seconds.
[IS06025(ALL)01/96]
one inch art:0032123-B
Anti-lock brake system light
*
[IS06050(ALL)03/96]
WARNING
If the anti-lock brake system warning
light remains on or comes on while
driving, have the braking system checked
by a qualified service technician as soon
as possible.
*
[IS06060(ALL)03/96]
NOTE: If a fault occurs in the anti-lock
system, and the brake warning light is
not lit, the anti-lock system is disabled
but normal brake function remains
operational.
File:03icisf.ex
Update:Tue Mar 4 08:51:24 1997
Page 19 of 254
16
*
[IS06075(ALL)01/96]
NOTE: If your vehicle must be jump-started
because of a low battery, the Anti-Lock
Brake System warning light could
remain on. This is due to low battery
voltage and does not indicate a
malfunction in the system. Under these
circumstances, you should drive your
vehicle only after the battery has had
time to charge and the light has gone
out.
[IS06090(ALL)02/96]
After starting the engine, check all the warning
lights to make sure that they are off. If any one
of them is still lit, it indicates a situation that
needs your attention. When you release the
parking brake, the brake warning light should
go off.
%*
[IS06100(ALL)01/96]
Ignition Key Chime
*
[IS06105(ALL)01/96]
If the driver or passenger door is open while the
key is still in the ignition, a warning chime
sounds.
[IS06115(ALL)02/96]
Headlamps On Chime
[IS06120(ALL)01/96]
This chime will sound when a door is opened
while the headlamps or parking lamps are on.
*
[IS06200(ALL)04/96]
Gauges
%*
[IS06300(ALL)03/96]
Fuel Gauge
*
[IS06325(ALL)01/96]
The fuel gauge displays approximately how
much fuel you have in the fuel tank.
*
[IS06350(ALL)01/96]
The ignition must be turned off while putting
fuel in the tank in order to get a correct fuel
gauge reading after the ignition is turned on.
*
[IS06375(ALL)01/96]
The fuel gauge indicator may vary slightly while
the vehicle is in motion. This is the result of fuel
movement within the tank. You can get a more
accurate reading with the vehicle on smooth,
level ground.
File:03icisf.ex
Update:Tue Mar 4 08:51:24 1997
Page 48 of 254
45
*
[CF30620(ALL)01/96]
If your key is stuck in the LOCK position and
will not turn, move your steering wheel left or
right until the key turns freely.
[CF30630(ALL)01/96]
If your vehicle has a manual transaxle, you must
push the key toward the steering column to
rotate the switch to the LOCK position.
*
[CF30650(ALL)01/96]
ACC (accessory) allows some of your vehicle's
electrical accessories such as the radio and the
windshield wipers to operate while the engine is
not running.
*
[CF30660(ALL)01/96]
ON allows you to test your vehicle's warning
lights (except the brake system warning light) to
make sure they work before you start the
engine. The key returns to the ON position once
the engine is started and remains in this position
while the engine runs.
*
[CF30680(ALL)01/96]
START cranks the engine. Release the key once
the engine starts so that you do not damage the
starter. The key should return to ON when you
release it. The START position also allows you
to test the brake warning light.
%
*
[CF32000(ALL)01/96]
Hazard Flasher Switch
[CF32100(ALL)02/96]
The hazard flasher switch is located on the top
of the steering column. For more information,
refer toHazard Flasherin theRoadside Emergencies
chapter.
%
*
[CF34000(ALL)02/96]
The Turn Signal Lever
*
[CF35000(ALL)02/96]
You can use the turn signal lever on the left side
of the steering column to:
*
[CF35020(ALL)02/96]
q
operate the headlamps and parking lamps
*
[CF35030(ALL)02/96]
q
operate the turn signals and cornering lamps
*
[CF35050(ALL)03/96]
q
turn the high beams on/off
*
[CF35060(ALL)03/96]
q
flash the lamps
File:05iccff.ex
Update:Tue Mar 4 08:52:57 1997
Page 49 of 254
46
*
[CF36000(ALL)02/96]
Headlamps and Parking Lamps
*
[CF36100(ALL)02/96]
To turn the parking lamps or headlamps on,
twist the knob at the end of the turn signal
lever.
[CF36200(ALL)01/96]
FIRST STOP Ð Turning the knob to the first
stop will turn on the license plate lamps,
parking lamps, side marker lamps, tail lamps,
and instrument panel lamps.
[CF36300(ALL)01/96]
SECOND STOP Ð Turning the knob to the
second stop will turn on the headlamps, license
plate lamps, parking lamps, side marker lamps,
tail lamps, and instrument panel lamps.
[CF36400(ALL)01/96]
quarter page art:0032172-A
Headlamp and parking lamp control
%*
[CF36450(ALL)03/96]
Daytime Running Light System
*
[CF36500(ALL)03/96]
(Canadian vehicles only)
*
[CF36600(ALL)04/96]
In Canada, the lights illuminate during daytime
operation. The Daytime Running Light system
(DRL) automatically illuminates when the
ignition switch is turned to the ON position. The
daytime running lights are switched off under
the following conditions:
*
[CF36620(ALL)01/96]
q
when the headlamps are switched on
*
[CF36630(ALL)01/96]
q
when the parking brake is applied
*
[CF36640(ALL)01/96]
q
when the flash-to-pass system is used
File:05iccff.ex
Update:Tue Mar 4 08:52:57 1997
Page 96 of 254
94
*
[TO05500(ALL)01/96]
3.If you have an automatic transaxle, make
sure that the gearshift is in P (Park) and the
parking brake is set before you turn the key.
*
[TO05600(ALL)01/96]
If you have a manual transaxle, make sure
that the parking brake is fully set, push the
clutch pedal to the floor, and put the
gearshift into Neutral before you turn the
key.(Remember, the starter will operate
only if the clutch pedal is pushed all the
way to the floor.)
*
[TO05800(ALL)02/96]
Before you start your vehicle, you should test
the warning lights on the instrument panel to
make sure that they work. Refer to the
Instrumentationchapter.
%*
[TO06000(ALL)01/96]
Starting Your Engine
*
[TO06100(ALL)01/96]
To start your engine:
*
[TO06300(ALL)01/96]
1. Follow the steps underPreparing to Start
Your Vehicleat the beginning of this section.
*
[TO06320(ALL)01/96]
2. Keep your foot on the brake pedal and turn
the ignition key to the ON position.
*
[TO06330(ALL)01/96]
3. DO NOT depress the accelerator pedal when
starting your engine. DO NOT use the
accelerator while the vehicle is parked.
*
[TO06340(ALL)01/96]
4. Turn the key to the START position
(cranking) until the engine starts. Allow the
key to return to the ON position after the
engine has started.
*
[TO06400(ALL)01/96]
If you have difficulty in turning the key,
rotate the steering wheel slightly because it
may be binding.
File:08ictof.ex
Update:Tue Mar 4 08:54:32 1997
Page 109 of 254
107
system automatically releases and re-applies the
front wheel brakes independently and the rear
brakes as a set. You can feel the system working
when the brake pedal pulses.
[GF03200(ALL)04/96]
Despite this improvement in braking, you should
continue to be careful in all driving situations,
especially when driving on extremely slippery
road surfaces. Maximum braking on roads with
loose surfaces such as snow or gravel, uneven
pavement, or alternating patches of slippery and
dry surfaces, may reduce the directional control
of your vehicle, even with the Anti-lock Brake
System. When driving under normal conditions,
the braking action is the same as with standard
brakes.
[GF03300(ALL)01/96]
Problems in the Anti-lock Brake System will
cause the Anti-lock Brake Warning Light to
illuminate, which indicates the system has a
problem. Normal braking is not affected unless
the brake warning light is also on.
[GF03400(ALL)01/96]
Each time the ignition key is turned to the ON
position, the Anti-lock Brake System functions
through one test cycle.
*
[GF03500(ALL)01/96]
NOTE: If your vehicle must be jump-started
because of a low battery, the Anti-Lock
Brake System warning light could
remain on. This is due to low battery
voltage and does not indicate a
malfunction in the system. Under these
circumstances, you should drive your
vehicle only after the battery has had
time to charge and the light has gone
out.
[GF03600(ALL)01/96]
NOTE: You might hear a chattering sound
from the Anti-lock Brake System each
time the vehicle is started or during
driving. This is normal.
File:09icgff.ex
Update:Tue Mar 4 08:54:55 1997
Page 110 of 254
108 [GF03700(ALL)04/96]Ford Motor Company has not found any
detrimental effects of popular mobile radio
transmitting equipment installed on vehicles
equipped with the Anti-lock Brake System if
normal radio installation practices are rigidly
followed. However, if after installing mobile
radio transmitting equipment, the Anti-lock
Brake System light comes on at any time other
than immediately after turning the key to the
ON position or during a sudden stop, have your
mobile radio dealer inspect the radio installation.
Proper radio installation procedures to be
followed are published by the radio
manufacturer.
%*
[GF04000(ALL)05/96]
Parking Brake
*
[GF04100(ALL)03/96]
The parking brake should be used whenever
you park your vehicle.
*
[GF04200(ALL)03/96]
If the brakes don't operate while the vehicle is
in motion, you can make an emergency stop
with the parking brake, however, the stopping
distance will be much greater than normal.
*
[GF04300(ALL)01/96]
The parking brake lever is located between the
front seats. To set the parking brake, put your
foot on the brake pedal while pulling the
parking brake handle fully and firmly upward.
*
[GF04400(ALL)01/96]
To release the parking brake, put your foot on
the brake pedal, pull the handle upward and
push the button. Then lower the handle to the
released position while holding the button in.
File:09icgff.ex
Update:Tue Mar 4 08:54:55 1997
Page 111 of 254
109 [GF04500(ALL)01/96]
one third page art:0030316-A
Parking brake (handbrake)
*
[GF05000(ALL)01/96]
WARNING
To prevent personal injury, do not release
the parking brake while outside the
vehicle.
*
[GF05100(ALL)01/96]
WARNING
Always set the parking brake fully and
make sure that the gearshift is securely
latched in P (Park) (automatic transaxle) or
in 1 (First) (manual transaxle).
*
[GF05400(ALL)01/96]
Always check the Brake Warning Light each
time you start your engine. Driving with the
parking brake on will cause the brakes to wear
out quickly and will reduce the fuel economy.
*
[GF06000(ALL)09/96]
WARNING
If the parking brake is fully released, but
the Brake System light remains on, have
the brakes checked immediately. They
may not be working properly.
*
[GF06500(ALL)03/96]
The parking brake is not designed to stop a
moving vehicle, but you can use the parking
brake to stop your vehicle in an emergency if
File:09icgff.ex
Update:Tue Mar 4 08:54:55 1997