heater FORD ASPIRE 1997 1.G Owners Manual

33
%*
[CF00900(ALL)03/96]
The Climate Control Systems
*
[CF01000(ALL)01/96]
Heating Only System (Without Air
Conditioning)
[CF01100(ALL)01/96]
Function selector
[CF01200(ALL)04/96]
The heater controls in your vehicle use levers to
control air direction and temperature. Fan speed
is controlled by a separate knob in the control
panel. The function selector lever lets you
control the direction of airflow.
[CF01500(ALL)01/96]
half page art:0032166-B
Heating only system control panel
[CF01600(ALL)01/96]
The symbols above the function selector lever
tell you where the air is being directed when the
lever is set to that position on the heater control
panel.
File:05iccff.ex
Update:Tue Mar 4 08:52:57 1997

37
*
[CF05800(ALL)04/96]
Tips for Controlling the Temperature in
Your Vehicle
*
[CF05900(ALL)01/96]
q
To vary the temperature inside your vehicle,
move the temperature selector toward the red
area for warmer air and toward the blue area
for cooler air.
*
[CF06000(ALL)01/96]
q
If you drive with the fan off and the
windows closed, the windows may fog up.
To prevent fogging:
[CF06100(ALL)01/96]
1. Set the function selector lever to theV
(defrost) position.
*
[CF06200(ALL)01/96]
2. Set the desired temperature.
*
[CF06300(ALL)04/96]
3. Set the
H(fan speed) to the desired
position.
[CF06350(ALL)04/96]
4. Always use theN(fresh air) position on
the air door control lever.
*
[CF06400(ALL)01/96]
q
Do not put objects under the front seats that
will interfere with the flow of air to the back
seats.
*
[CF06500(ALL)01/96]
q
Remove any snow, ice, or leaves from the
area below the windshield on the outside of
your vehicle. They could block the air intake.
*
[CF06600(ALL)01/96]
Air Conditioning System (If equipped)
[CF06700(ALL)01/96]
Air distribution is controlled the same way as in
the heater system described above.
[CF06800(ALL)01/96]
The air conditioner switch is located on the
climate control panel. To turn on the air
conditioner, push the A/C button. An indicator
light will come on. To turn off the air
conditioner, push the button again. The fan must
also be on for the A/C to operate.
File:05iccff.ex
Update:Tue Mar 4 08:52:57 1997

97
*
[TO08500(ALL)01/96]
WARNING
Do not park, idle, or drive your vehicle in
dry grass or other dry ground cover. The
emission system heats up the engine
compartment and exhaust system, which
can start a fire.
%*
[TO08600(ALL)01/96]
Using the Engine Block Heater
(If equipped)
*
[TO08610(ALL)01/96]
Engine block heaters are strongly recommended
if you live in a region where temperatures reach
-10ÊF (-23ÊC) orbelow. An engine block heater
warms the engine coolant, which improves
starting, warms up the engine faster, and allows
the heater-defrost system to respond quickly.
*
[TO08620(ALL)01/96]
To turn the heater on, simply plug it into a
grounded 110-volt outlet. Ford recommends that
you use a 110-volt circuit that is protected by a
ground fault circuit interrupter.
*
[TO08650(ALL)01/96]
WARNING
To prevent electrical shock, do not use
your heater with ungrounded electrical
systems or two-pronged (cheater) adapters.
*
[TO08670(ALL)01/96]
For best results, plug the heater in at least three
hours before you start your vehicle. Using the
heater for longer than three hours will not
damage the engine, so you can plug it in at
night to start your vehicle the following
morning.
*
[TO08700(ALL)04/96]
Shift-lock System (If equipped)
*
[TO08800(ALL)04/96]
For your safety, the automatic transaxle has a
shift-lock system, which prevents shifting the
transaxle out of the P (Park) position without
depressing the brake pedal when the ignition
key is in the ON position.
File:08ictof.ex
Update:Tue Mar 4 08:54:32 1997

103
*
[TO12100(ALL)01/96]
Have the exhaust and body ventilation systems
checked whenever:
*
[TO12200(ALL)01/96]
q
your vehicle is raised for service
*
[TO12300(ALL)01/96]
q
the sound of the exhaust system changes
*
[TO12400(ALL)01/96]
q
your vehicle has been damaged in a collision
*
[TO12500(ALL)01/96]
Improve your ventilation by keeping all air inlet
vents clear of snow, leaves, and other debris.
[TO12600(ALL)01/96]
If you must allow your engine to idle for long
periods of time, be sure you are in an open area
and open the windows at least one inch
(25 mm). Also, adjust the heating or air
conditioning to bring in outside air.
[TO12700(ALL)01/96]
If you are using the heater, set the fan speed on
1, 2, or 3 with the function lever on the position
of your choice and the air door control lever in
the fresh (outside air) position.
[TO12900(ALL)04/96]
If you are using the air conditioner, set the fan
speed on 1, 2, or 3 with the function lever in the
position of your choice. Set the air door control
lever in theN(outside air) position.
File:08ictof.ex
Update:Tue Mar 4 08:54:32 1997

140
*
[ER12310(ALL)02/96]
2. Do not disconnect the battery of the disabled
vehicle. You could damage the vehicle's
electrical system.
*
[ER12315(ALL)02/96]
3. Park the booster vehicle close to the hood of
the disabled vehicle.Make sure the vehicles
do not touch each other.Set the parking
brake on both vehicles and stay clear of the
engine cooling fan and other moving parts.
*
[ER12320(ALL)02/96]
4. Check all battery terminals and remove any
excessive corrosion before you attach the
jumper cables.
*
[ER12325(ALL)03/96]
5. Turn on the heater fan in both vehicles.
Press the DEFROST button. Turn off all
other switches and gauges.
%*
[ER12330(ALL)02/96]
Connecting the jumper cables
*
[ER12335(ALL)02/96]
1. Connect one end of the first jumper cable to
the positive (+) terminal of the discharged
battery. (You can connect either jumper cable
to the positive (+) terminal, as long as you
use the same cable for both positive
terminals.) Most jumper cables have a red
cable and a black cable. The red cable is
generally used for the positive terminals and
the black for the negative ones.
*
[ER12340(ALL)02/96]
2. Connect the other end of the first cable to
the positive (+) terminal of the booster
battery.
*
[ER12345(ALL)02/96]
3. Connect one end of the second cable to the
negative (S) terminal of the booster battery
Ð NOT to the discharged battery.
File:10icerf.ex
Update:Tue Mar 4 08:55:59 1997

159 %
*
[MC21200(ALL)05/96]
Engine Coolant Drain and Flush
*
[MC21300(ALL)05/96]
The proper procedures to completely drain and
flush the engine cooling system can be found in
the Service Manual for your vehicle or you can
see your dealer. See the order form located
before this chapter. Follow these recommended
procedures to ensure that your vehicle has the
specified engine level and 50/50 mixture of
cooling system fluid and water.
%*
[MC22100(ALL)01/96]
Checking Hoses
*
[MC22200(ALL)04/96]
Check all engine and heater system hoses and
hose connections for deterioration, leaks, and
loose hose clamps as specified in themaintenance
schedule. Repair or replace with Motorcraft hoses
or equivalent as necessary.
%
*
[MC23000(ALL)01/96]
Power Steering Fluid
*
[MC23100(ALL)01/96]
Check the level of the power steering fluid at
least twice a year (i.e., every Spring and Fall).
%*
[MC23200(ALL)01/96]
Checking and Adding Power Steering
Fluid
*
[MC23300(ALL)04/96]
1. Start the engine and let it run until the
power steering fluid reaches normal
operating temperature. The power steering
fluid will be at the right temperature when
the engine coolant temperature gauge in the
instrument cluster is near the center of the
normal operating temperature range.
*
[MC23400(ALL)01/96]
2. While the engine idles, turn the steering
wheel back and forth several times. Make
sure that the cap assembly is installed at this
time.
*
[MC23500(ALL)01/96]
3. Turn the engine off.
File:11icmcf.ex
Update:Tue Mar 4 08:57:16 1997

248 Index
Engine (continued)
fuel injected engine, starting.....93±94
fuel pump shut-off switch....... 100
preparing to start............ 93
starting................. 94
starting after a collision........ 100
storing your vehicle........195, 197
Engine block heater............ 97
Engine coolant............. 155
checking and adding......... 155
checking hoses............ 159
disposal...........146, 152, 162
drain and flush............ 159
preparing for storage......... 197
proper solution........146, 152, 162
recovery reservoir........... 155
temperature gauge........... 17
Engine coolant temperature gauge..... 17
description............... 17
mechanical............... 17
Engine coolant temperature
guage:electronic............. 17
Engine fan............... 146
Engine:idle speed control.......... 96
Engine knocking............. 177
Engine oil............... 149
changing oil and oil filter.....150, 152
checking and adding......... 150
check oil warning light......... 11
dipstick............... 150
disposal...........146, 152, 162
engine oil pressure warning light..... 11
filter, specifications.......... 199
low oil warning light.......... 11
specifications............. 149
synthetic oil............. 149
ªbreak-inº oils............. 5
viscosity............... 149
Exhaust fumes............. 102
Extended Service Plan, Ford........ 4
File:icixf.ex
Update:Tue Mar 4 08:59:36 1997