remove seats FORD ASPIRE 1997 1.G Owners Manual

37
*
[CF05800(ALL)04/96]
Tips for Controlling the Temperature in
Your Vehicle
*
[CF05900(ALL)01/96]
q
To vary the temperature inside your vehicle,
move the temperature selector toward the red
area for warmer air and toward the blue area
for cooler air.
*
[CF06000(ALL)01/96]
q
If you drive with the fan off and the
windows closed, the windows may fog up.
To prevent fogging:
[CF06100(ALL)01/96]
1. Set the function selector lever to theV
(defrost) position.
*
[CF06200(ALL)01/96]
2. Set the desired temperature.
*
[CF06300(ALL)04/96]
3. Set the
H(fan speed) to the desired
position.
[CF06350(ALL)04/96]
4. Always use theN(fresh air) position on
the air door control lever.
*
[CF06400(ALL)01/96]
q
Do not put objects under the front seats that
will interfere with the flow of air to the back
seats.
*
[CF06500(ALL)01/96]
q
Remove any snow, ice, or leaves from the
area below the windshield on the outside of
your vehicle. They could block the air intake.
*
[CF06600(ALL)01/96]
Air Conditioning System (If equipped)
[CF06700(ALL)01/96]
Air distribution is controlled the same way as in
the heater system described above.
[CF06800(ALL)01/96]
The air conditioner switch is located on the
climate control panel. To turn on the air
conditioner, push the A/C button. An indicator
light will come on. To turn off the air
conditioner, push the button again. The fan must
also be on for the A/C to operate.
File:05iccff.ex
Update:Tue Mar 4 08:52:57 1997

62 [SS00435(ALL)01/96]
half page art:0030104-CFolding up the rear seat cushion
*
[SS00445(ALL)05/96]
WARNING
Cargo should always be secured to
prevent it from shifting and causing
damage to the vehicle or harm to the
passengers.
*
[SS00450(ALL)01/96]
WARNING
Do not remove the floor carpet in your
vehicle. Emission controls cause high
exhaust temperatures under the floor.
[SS00455(ALL)01/96]
NOTE: When returning the folding seats to the
upright position, remember to return
rear shoulder belts to their proper
position. Routing the safety belt
webbing through the rear safety belt
guides will help keep belts from being
trapped behind or under the seats.
File:06icssf.ex
Update:Tue Mar 4 08:54:10 1997

194
*
[MC72000(ALL)01/96]
Cleaning the Engine
*
[MC72100(ALL)01/96]
A clean engine is more efficient because the
engine is able to cool properly. A build up of
grease and dirt acts as an insulator, keeping the
engine warmer than normal.
*
[MC72200(ALL)01/96]
q
Extreme care must be used if a power washer
is used to clean the engine. The high pressure
fluid could penetrate sealed parts and
assemblies causing damage or malfunctions.
*
[MC72300(ALL)04/96]
q
In order to avoid possible cracking of the
engine block or fuel injection pump, do not
spray a hot engine or injection pump with
cold water.
*
[MC72400(ALL)04/96]
q
The alternator, distributor and air intake must
be covered. Covering these components will
help prevent water damage.
*
[MC72500(ALL)01/96]
Never wash or rinse the engine while it is
running. Water getting into the engine may
cause internal damage.
%*
[MC73000(ALL)03/96]
Cleaning the Seats
*
[MC73100(ALL)01/96]
Vinyl
*
[MC73200(ALL)01/96]
Wipe the surface with a damp, soft cloth, then
dry and buff with a dry, soft cloth.
%*
[MC73300(ALL)05/96]
Fabric
*
[MC73400(ALL)05/96]
Remove dust and loose dirt with a whisk broom
or a vacuum cleaner. Remove fresh spots
immediately. Follow the directions that come
with the cleaner.
*
[MC73500(ALL)05/96]
NOTE: Before using any cleaner, test it on a
small, hidden area of fabric. If the
fabric's color or texture is adversely
affected by a particular cleaner, do not
use it.
File:11icmcf.ex
Update:Tue Mar 4 08:57:16 1997