clock FORD CONTOUR 1997 2.G User Guide

210
[MC24400(ALL)12/95]3.
Replace the fuel cap completely when you are finished. Turn
it clockwise until it is tight. It will click when it is fully
tightened.
*
[MC24500(ALL)01/96]4.
Push the fuel door closed.
*
[MC24600(ALL)01/96]
If you lose the fuel cap, replace it with an authorized Motorcraft
or equivalent part.
%*
[MC24700(ALL)01/96
]
RWARNING
If you do not use the proper fuel cap, the pressure in the
fuel tank can damage the fuel system or cause it to work
improperly in a collision.
*
[MC24800(ALL)01/96]
NOTE: If you replace your fuel cap with an aftermarket fuel
filler cap, the customer warranty may be void for any
damage to the fuel tank and/or fuel system.
%*
[MC24900(ALL)01/96
]
Choosing the Right Fuel
*
[MC25000(ALL)03/96]
Use only UNLEADED FUEL. Using leaded fuel is prohibited by
federal law and could damage your vehicle. The damage may
not be covered by your warranty.
*
[MC25100(ALL)05/96]
Your vehicle was not designed to use fuel containing
manganese-based additives such as MMT. Additionally, vehicles
certified to California emission standards (indicated on the
underhood Vehicle Emissions Control Information label) are
designed to operate on California reformulated gasolines. If
California reformulated gasoline is not available when you
refuel, your vehicle can be operated on non-California fuels.
However, even though your engine will perform adequately on
other gasolines, the performance of the emission control devices
and systems may be adversely affected. Repair of damage
caused by using a fuel that your vehicle was not designed for
may not be covered by your warranty.
File:11cdmco.ex
Update:Thu Sep 12 11:08:18 1996

Maintenance and Care
221
*
[MC36100(ALL)03/96]
Removing the headlamp bulb
*
[MC36200(ALL)01/96]1.
Make sure that the headlamp knob is in the OFF position.
*
[MC36300(ALL)01/96]2.
Lift the hood and find the bulb in the headlamp socket.
[MC36400(ALL)12/95]3.
Remove the bulb assembly by turning it clockwise and
pulling it out of the headlamp socket.
[MC36500(ALL)12/95]4.
Remove the L-shaped bulb by pressing the retaining clip at
the base of the electrical connector and sliding the bulb out.
*
[MC36600(ALL)03/96]
Installing the headlamp bulb
[MC36700(ALL)12/95]1.
Without touching the glass on the bulb, insert the new bulb.
You may want to protect the bulb by holding it with a piece
of cloth or paper towel. Make sure the retaining clip at the
base of the electrical connector locks.
[MC36800(ALL)12/95]2.
Insert the bulb assembly in the headlamp socket. Turn it
counterclockwise to lock it in place.
[MC36900(ALL)12/95]3.
Turn the headlamps on and make sure that they work
properly. If the headlamp was correctly aligned before you
changed the bulb, you should not need to align it again.
File:11cdmco.ex
Update:Thu Sep 12 11:08:18 1996

222
%*
[MC37000(ALL)01/96
]
High-Mount Brakelamp Bulbs
[MC37100(ALL)12/95]
From the back seat, remove the back of the brakelamp
assembly. Depress the two retaining tabs on the ends of the
assembly and pull off the back.
[MC37200(ALL)12/95]
Turn the burned-out bulb counterclockwise and pull it out. Push
in the replacement bulb and turn it clockwise to lock it in the
socket. Replace the back of the brakelamp assembly, making
sure that the retaining tabs snap into place.
[MC37300(ALL)12/95]
17-1/2 pica
art:0000624-B
The high-mount brakelamp assembly
File:11cdmco.ex
Update:Thu Sep 12 11:08:18 1996

274
Child safety seats (continued)
in rear outboard seat................ 102
in rear seat..................... 102
tether anchorage hardware.............. 114
Chime
headlamps on.................... 16
key in ignition.................... 58
safety belt...................... 12
Circuit breakers, checking and replacing......... 160
Cleaning your vehicle................. 224
CD player and discs.................. 33
chrome and aluminum parts............. 225
engine compartment................. 227
exterior...................... 224
exterior lamps................... 226
fabric....................... 226
headlamps..................... 226
instrument panel................. 7,225
interior....................... 226
mirrors........................ 75
plastic parts.................... 225
polishing...................... 224
rear windows..................... 52
rustproofing.................... 225
safety belts..................... 225
tail lamps..................... 226
upholstery and interior trim............. 226
washing...................... 224
waxing....................... 224
wheels....................... 227
Climate control system.................. 47
Clock.......................... 55
Clutch........................ 136
fluid reservoir................... 188
operation while driving............... 136
shifting the gears.................. 136
specifications.................... 231
File:cdixo.ex
Update:Thu Sep 12 11:12:35 1996