FORD CROWN VICTORIA 1998 2.G Owner's Guide

FORD CROWN VICTORIA 1998 2.G Owner's Guide CROWN VICTORIA 1998 2.G FORD FORD https://www.carmanualsonline.info/img/11/4774/w960_4774-0.png FORD CROWN VICTORIA 1998 2.G Owner's Guide
Trending: trunk release, instrument cluster, mileage, air condition, steering, child lock, flat tire

Page 31 of 160

FORD CROWN VICTORIA 1998 2.G Owners Guide economical and will cool the inside of the vehicle faster. Airflow is
from the instrument panel registers. This mode can also be used to
prevent undesirable odors from entering the vehicle.
²NORM A/C

Page 32 of 160

FORD CROWN VICTORIA 1998 2.G Owners Guide Displaying outside temperature
Press OUTSIDE TEMP to display
the outside air temperature. It will
be displayed until OUTSIDE TEMP
is pressed again.
If the selected temperature is changed while the out

Page 33 of 160

FORD CROWN VICTORIA 1998 2.G Owners Guide ²Remove any snow, ice or leaves
from the air intake area (at the
bottom of the windshield).
²If your vehicle has been parked with the windows closed during hot
weather, the air conditioner will do a

Page 34 of 160

FORD CROWN VICTORIA 1998 2.G Owners Guide TURN SIGNAL CONTROL
²Push down to activate the left
turn signal.
²Push up to activate the right turn
signal.
The flash rate of the turn signal will speed up considerably if the
Lighting Control Modu

Page 35 of 160

FORD CROWN VICTORIA 1998 2.G Owners Guide POSITIONS OF THE IGNITION
1. ACCESSORY, allows the electrical
accessories such as the radio to
operate while the engine is not
running.
2. LOCK, locks the steering wheel,
automatic transmission gearsh

Page 36 of 160

FORD CROWN VICTORIA 1998 2.G Owners Guide SPEED CONTROL (IF EQUIPPED)
To turn speed control on
²Press ON.
Vehicle speed cannot be controlled
until the vehicle is traveling at or
above 48 km/h (30 mph).
Do not use the speed control in heavy t

Page 37 of 160

FORD CROWN VICTORIA 1998 2.G Owners Guide To set a speed
²Press SET ACC/SET ACCEL. For
speed control to operate, the
speed control must be ON and
the vehicle speed must be greater
than 48 km/h (30 mph).
If you drive up or down a steep hill,

Page 38 of 160

FORD CROWN VICTORIA 1998 2.G Owners Guide You can accelerate with the accelerator pedal at any time during speed
control usage. Releasing the accelerator pedal will return your vehicle to
the previously programmed set speed.
To set a lower se

Page 39 of 160

FORD CROWN VICTORIA 1998 2.G Owners Guide Pressing OFF will erase the
previously programmed set speed.
To return to a previously set speed
²Press RES/RSM/RESUME. For
RES/RSM/RESUME to operate,
the vehicle speed must be faster
than 48 km/h (3

Page 40 of 160

FORD CROWN VICTORIA 1998 2.G Owners Guide When programming your HomeLinktUniversal Transmitter, you
will be operating the garage door or gate. Be sure that people
and objects are out to the way to prevent potential harm or damage.
Do not use
Trending: battery location, radio controls, service, torque, window, seats, mirror