seat memory FORD EDGE 2012 1.G Owners Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 2012, Model line: EDGE, Model: FORD EDGE 2012 1.GPages: 396, PDF Size: 3.25 MB
Page 88 of 396
Memory mirrors (if equipped)
The power side view mirror positions are saved when doing a memory
set and can be recalled along with the vehicle personality features when
a memory position is selected through the remote entry transmitter,
keyless entry keypad or memory switch on the driver’s door. Refer to
Front seatsin theSeating and Safety Restraintschapter.
Heated outside mirrors
(if equipped)
Both mirrors are heated
automatically to remove ice, mist
and fog when the rear window
defrost is activated.
Do not remove ice from the
mirrors with a scraper or
attempt to readjust the mirror
glass if it is frozen in place.
These actions could cause damage to the glass and mirrors.
Do not clean the housing or glass of any mirror with harsh
abrasives, fuel or other petroleum-based cleaning products.
Fold-away mirrors
Fold the side mirrors in carefully
when driving through a narrow
space, like an automatic car wash.
Signal indicator mirrors (if equipped)
When the turn signal is activated, the outer portion of the appropriate
mirror housing will blink. This provides an additional warning to other
drivers that your vehicle is about to turn.
Blind spot mirrors (if equipped)
Your vehicle may be equipped with blind spot mirrors or a blind spot
information system. Refer toBlind spot mirrorsorBlind spot
information system (BLIS) with cross traffic alert (CTA)in the
Drivingchapter.
Driver Controls
88
2012 Edge(edg)
Owners Guide, 1st Printing
USA(fus)
Page 128 of 396
Memory feature (seat and mirrors) (if equipped)
The integrated keyhead transmitter (IKT) or intelligent access key (IA
key) allows you to recall the memory seat and power mirrors feature.
Press
or activate intelligent access (if equipped) to recall memory
and automatically move the seat and power mirrors to the desired
memory position. The mirrors will move to the programmed position and
the seat will move to the easy entry position. The seat will move to the
final position when the ignition is switched out of off (if easy entry
feature is enabled).
Programming the memory feature to the transmitter
To activate this feature:
1. Move the driver seat and power mirrors to the desired positions using
the associated controls.
2. Press and hold button 1 for five
seconds. A tone will be heard after
about two seconds confirming
memory position has been set.
Continue to hold until a second tone
is heard after five seconds.
3. Within three seconds press
.
4. Wait 10 seconds, then press
.
5. Repeat this procedure for memory 2 and another transmitter if
desired.
Deprogramming the memory feature from the transmitter
To deactivate this feature:
1. Press and hold either the 1 or 2 button for five seconds. A tone will be
heard after 1
1 2seconds when the memory store is done, continue to
hold until a second tone is heard after five seconds.
2. Within three seconds press the
.
3. Repeat this procedure for each additional transmitter if desired.
Locks and Security
128
2012 Edge(edg)
Owners Guide, 1st Printing
USA(fus)
Page 134 of 396
SECURICODE™ KEYLESS ENTRY SYSTEM (IF EQUIPPED)
You can use the keyless entry
keypad to:
•lock or unlock the doors without
using a key.
•recall memory seat/power mirrors
positions (if equipped).
•enable/disable autolock and autounlock.
•program/erase user codes.
•arm/disarm the perimeter alarm system.
The keypad can be operated with the factory set 5-digit entry code; this
code is located on the owner’s wallet card in the glove box and is
available from your authorized dealer. You can also create up to five of
your own 5-digit personal entry codes.
When pressing the controls on the keypad, press the middle of the
controls to ensure a good activation.
Programming a personal entry code and keypad association to
memory feature
To create your own personal entry code:
1. Enter the factory set code.
2. Within five seconds press the 1•2 on the keypad.
3. Enter your personal 5-digit code. Each number must be entered
within five seconds of each other.
4. For memory recall feature, enter the sixth digit 1•2 to store driver 1
settings or 3•4 to store driver 2 settings.
Note:Pressing 5•6, 7•8, or 9•0 keypad numbers as a sixth digit
will not recall a driver memory setting.
Note:The factory-set code cannot be associated with a memory setting.
5. The doors will lock then unlock to confirm that your personal entry
code has been programmed to the module.
You may also program a personal entry code through the MyFord
Touch™ / MyLincoln Touch™ system (if equipped). Refer to theMyFord
Touch™ / MyLincoln Touch™supplement.
Locks and Security
134
2012 Edge(edg)
Owners Guide, 1st Printing
USA(fus)
Page 148 of 396
To operate the heated seats:
Press the heated seat symbol to
cycle through the various heat
settings and off. Warmer settings are
indicated by more indicator lights.
If the engine falls below 350 rpm while the heated seats are on, the
feature will turn itself off and will need to be reactivated.
Memory feature (if equipped)
This system allows automatic
positioning of the driver seat and
power mirrors to two programmable
positions.
The memory seat control is located
on the instrument panel.
•To program position 1, move the
memory features to the desired
positions using the associated controls. Press and hold button 1 for at
least two seconds. A chime will sound confirming that a memory
position has been set.
•To program position 2, repeat the previous procedure using button 2.
A memory seat position may be programmed at any time.
To program the memory feature to a remote entry transmitter, refer to
Remote entry systemin theLocks and Securitychapter.
A programmed memory position can be recalled:
•in any gearshift position if the ignition isnoton.
•only in P (Park) or N (Neutral) if the ignition is on.
The memory positions are also recalled when you press your remote
entry transmitter
(unlock) control (if the transmitter is programmed
to a memory position) or, when you enter a valid personal entry code
that is programmed to a memory position. The mirrors will move to the
programmed position and the seat will move to the easy entry position.
The seat will move to the final position when the key is in the ignition (if
easy entry feature is enabled).
21
Seating and Safety Restraints
148
2012 Edge(edg)
Owners Guide, 1st Printing
USA(fus)
Page 284 of 396
The fuses are coded as follows.
Fuse/Relay
LocationFuse Amp
RatingProtected Circuits
1 30A Driver front smart window
2 15A Not used (spare)
3 30A Not used (spare)
4 10A Demand lamps
5 20A Not used (spare)
6 5A RF module
7 7.5A Power mirror switch, Memory seat
switch, Driver seat module
8 10A Not used (spare)
9 10A Power liftgate
10 10A Run/accessory relay
11 10A Instrument panel cluster,
Heads-up display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
223341
42
43
44
45
34
35
36
37
23
24
25
26
27
283846
394729
32
40
31
30
48
49
Roadside Emergencies
284
2012 Edge(edg)
Owners Guide, 1st Printing
USA(fus)
Page 393 of 396
Instrument panel
cleaning ...................................316
cluster ........................................12
lighting up panel and
interior .......................................71
Intelligent Access Key ..............114
Intelligent Access with push
button start ...............................125
J
Jack ............................................291
positioning ...............................291
storage .....................................291
Jump-starting your vehicle ......298
K
Keyless entry system
autolock ...................................122
keypad .....................................134
locking and unlocking
doors ........................................135
programming entry code .......134
Keys ...................................114, 136
positions of the ignition .........234
L
Lamps
autolamp system .......................69
bulb replacement
specifications chart ..................75
daytime running light ...............70
headlamps .................................69
headlamps, flash to pass ..........70
instrument panel, dimming .....71
interior lamps ...........................74
replacing bulbs .........................76LATCH anchors .........................192
Liftgate ......106–107, 112–113, 127
Lights, warning and indicator ....12
anti-lock brakes (ABS) ..........242
Load limits .................................222
Locks
autolock ...................................122
childproof ................................124
doors ........................................121
Lubricant specifications ...........356
Lug nuts ....................................297
Lumbar support, seats .....145, 147
M
Message center .....................20, 25
warning messages ...............25, 35
Mirrors .........................................87
automatic dimming rearview
mirror ........................................87
fold away ...................................88
heated ........................................88
programmable memory ..........128
side view mirrors (power) .......87
signal .........................................88
Moon roof ..................................100
Motorcraftparts ..............318, 355
MyFord™ system ..................45, 56
MyKey ........................................115
O
Octane rating ............................340
Oil (see Engine oil) ..................324
Overdrive ...................................251
Index
393
2012 Edge(edg)
Owners Guide, 1st Printing
USA(fus)
Page 395 of 396
front seats .......................144, 147
memory seat ...................128, 148
Second-row power fold seat ....151
SecuriCode keyless entry
system ........................................134
SecuriLock passive anti-theft
system ........................................136
Servicing your vehicle ..............319
Setting the clock .........................46
SOS Post Crash Alert ...............183
Spare tire (see Changing
the Tire) ....................................294
Spark plugs,
specifications .....................355, 360
Specification chart,
lubricants ...................................356
Speed control ..............................89
Starting your vehicle ........234–236
jump starting ..........................298
push button start system .......237
Steering wheel
controls ......................................98
tilting .........................................82
T
Tilt steering wheel ......................82
Tire Pressure Monitoring
System (TPMS)
Tires, Wheels and Loading ....218
Tires ...........................203–205, 291
alignment ................................212
care ..........................................208
changing ..........................291, 294
checking the pressure ............208
inflating ...................................206
label .........................................217replacing ..................................209
rotating ....................................212
safety practices .......................211
sidewall information ...............213
snow tires and chains ............222
spare tire .........................292, 294
terminology .............................205
tire grades ...............................204
treadwear ........................204, 208
Towing .......................................229
recreational towing .................232
trailer towing ..........................229
wrecker ....................................302
Transmission .............................251
brake-shift interlock (BSI) ....250
fluid, checking and adding
(automatic) .....................349, 352
fluid, refill capacities ..............356
lubricant specifications ..........356
Turn signal ..................................73
U
Universal garage door
opener ........................................101
USB port ......................................55
V
Vehicle Identification Number
(VIN) ..........................................362
Vehicle loading ..........................222
Ventilating your vehicle ...........239
W
Warning lights (see Lights) .......12
Washer fluid ..............................323
Water, Driving through .............279
Index
395
2012 Edge(edg)
Owners Guide, 1st Printing
USA(fus)