clock reset FORD ESCORT 1996 7.G Owners Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 1996, Model line: ESCORT, Model: FORD ESCORT 1996 7.GPages: 387, PDF Size: 3.92 MB
Page 216 of 387
216
*
[AS23900(ALL)08/95]
NOTE: If the vehicle's battery is disconnected,
the clock and station memory preset
buttons will need to be reset.
*
[AS24000(ALL)08/95]
Adjusting the tone balance and speaker
output of your radio
*
[AS24100(ALL)08/95]
q
Increasing or decreasing bass response
[AS24250(ALL)06/95]
Push the ªAUDIOº button repeatedly until
the display reads ªBASS.º Push the ª+º side
of the ªVOLUMEº button to increase bass
(more ªlowsº), and push the ª-º side to
decrease bass (less ªlowsº).
*
[AS24300(ALL)08/95]
q
Increasing or decreasing treble response
[AS24450(ALL)06/95]
Push the ªAUDIOº button repeatedly until
the display reads ªTREB.º Push the ª+º side
of the ªVOLUMEº button to increase treble
(more ªhighsº), and push the ª-º side to
decrease treble (less ªhighsº).
*
[AS24500(ALL)08/95]
Speaker features and operation
*
[AS24600(ALL)08/95]
q
Adjusting speaker balance
[AS24750(ALL)06/95]
Balance control allows you to adjust the
sound distribution between the right and left
speakers. Push the ªAUDIOº button
repeatedly until the display reads ªBAL.º
Push the ª+º side of the ªVOLUMEº button
to shift the sound to the right speakers, and
push the ª-º side to shift the sound to the
left speakers.
*
[AS24800(ALL)08/95]
q
Adjusting speaker fader
[AS24950(ALL)06/95]
Fade control allows you to adjust the sound
distribution between the front and rear
speakers. Push the ªAUDIOº button
repeatedly until the display reads ªFADE.º
Push the ª+º side of the ªVOLUMEº button
to shift the sound to the front speakers, and
push the ª-º side to shift the sound to the
rear speakers.
File:09ctase.ex
Update:Tue Sep 19 14:51:59 1995
Page 218 of 387
218
*
[AS27100(ALL)08/95]
How to eject the tape
*
[AS27250(ALL)08/95]
To stop the tape and eject the cassette, press the
ªEJECTº button. The radio will resume playing.
*
[AS27300(ALL)08/95]
Using the DolbyHB noise reduction feature
*
[AS27400(ALL)08/95]
NOTE: Noise reduction system manufactured
under license from Dolby Labs
Licensing Corporation. ªDolbyº and
double-D symbol are trademarks of
Dolby Laboratories Licensing
Corporation.
*
[AS27500(ALL)08/95]
Push thek/memory preset #3 button to
activate. Push again to deactivate.
%*
[AS27510(ALL)08/95]
Clock Operation
*
[AS27520(ALL)08/95]
How to view the clock mode
*
[AS27530(ALL)08/95]
Press the ªCLOCKº button to alternate the
frequency and time in the display. In the clock
mode, pressing any radio function will
automatically display the radio frequency for
approximately ten seconds before changing back
to the clock mode.
*
[AS27540(ALL)08/95]
How to set the clock
*
[AS27550(ALL)08/95]
1. Turn the radio on.
*
[AS27560(ALL)08/95]
2. Press and hold in the ªCLOCKº button,
press the ªSEEKº button left (
b) to advance
the hours and right (
a) to advance the
minutes.
*
[AS27570(ALL)08/95]
NOTE: The clock displays 12-hour time with
no AM/PM indications.
File:09ctase.ex
Update:Tue Sep 19 14:51:59 1995
Page 256 of 387
256 [RE13200(ALL)06/93]
quarter page art:0070177-AAnti-theft lug nut and key
*
[RE13300(ALL)03/95]
Removing the anti-theft lug nut
*
[RE13500(ALL)03/95]
Insert the key over the locking lug nut. Make
sure that you hold the key square to the lug nut.
If you hold the key on an angle, you may
damage the key and the lug nut.
*
[RE13600(ALL)03/95]
Place the lug nut wrench over the lug nut key
and apply pressure on the key with the wrench.
Turn the wrench in a counterclockwise direction
to remove the lug nut.
*
[RE13650(ALL)09/95]
Reinstalling the anti-theft lug nut
*
[RE13700(ALL)03/95]
Insert the key over the locking lug nut. Place the
lug nut wrench over the lug nut key and, while
applying pressure on the key, install the lug nut.
*
[RE15100(ALL)12/91]
If the Engine Cranks but Does
Not Start or Starting After a
Collision
*
[RE15150(ALL)07/95]
The Fuel Pump Shut-off Switch
*
[RE15200(ALL)07/95]
If the engine cranks but does not start or if you
have had a collision, the fuel pump shut-off
switch may have been triggered. The shut-off
switch is a device that stops the fuel pump
when your vehicle has been involved in a
substantial jolt.
*
[RE15250(ALL)07/95]
For information on how to check and reset the
fuel pump shut-off switch, seeFuel pump shut-off
switchin the Index.
File:12ctree.ex
Update:Tue Sep 19 14:55:16 1995
Page 312 of 387
313
%*
[SV29210(ALL)03/95]
Battery
[SV29220(ALL)03/95]
If the original equipment maintenance-free
battery is replaced, it may be replaced by a
low-maintenance battery. SeeMotorcraft Partsat
the end of this chapter for the proper
replacement battery.
*
[SV29230(ALL)03/95]
The low-maintenance battery has removable vent
caps for checking the electrolyte level and
adding water. The electrolyte level should be
checked at least every 24 months or 24,000 miles
(40,000 km) in temperatures up to90ÊF (32ÊC)
and more often in temperatures above90ÊF
(32ÊC). Keep the electrolyte level in each cell up
to the level indicator. Do not overfill.
*
[SV29240(ALL)03/95]
If the level gets low, refill the battery with
distilled water. If necessary, you can add tap
water to the battery, provided the water is not
hard or does not have a high mineral or alkali
content. If the battery needs water quite often,
have the charging system checked for a possible
malfunction.
[SV29245(ALL)03/95]
If you disconnect the battery, the engine must
ªrelearnº its idle conditions before your vehicle
will drive properly. To find out how the engine
does this, seeStarting your vehicle's fuel-injected
enginein the Index.
[SV29250(ALL)02/94]
If the battery has been disconnected, you will
have to reset the clock and the preset stations on
your radio once the battery is reconnected.
File:15ctsve.ex
Update:Tue Sep 19 14:37:50 1995