light FORD ESCORT 1996 7.G Owners Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 1996, Model line: ESCORT, Model: FORD ESCORT 1996 7.GPages: 387, PDF Size: 3.92 MB
Page 3 of 387
*
[PI00560(ALL)05/95]
Table of ContentsIntroductory Information............................... 1
Safety Restraints.............................................. 9
Starting Your Escort.................................... 105
Warning Lights and Gauges..................... 117
Instrument Panel Controls........................ 135
Steering Column Controls........................ 159
Features.......................................................... 169
Electronic Sound Systems......................... 197
Driving Your Escort.................................... 223
Roadside Emergencies................................ 243
Customer Assistance................................... 259
Reporting Safety Defects...................... 266
Accessories.................................................... 271
Servicing Your Escort................................. 279
Quick Index.................................................. 353
Index................................................................ 371
Service Station Information...................... 388
File:01ctpie.ex
Update:Tue Sep 19 14:32:49 1995
Page 9 of 387
6
%*
[IN07100(ALL)04/95]
Cleaning the Outside of Your
Vehicle
%*
[IN07200(ALL)04/95]
Washing and Polishing Your Vehicle
*
[IN07300(ALL)04/95]
Wash the outside of your vehicle, including the
underside, with a mild detergent.
*
[IN07400(ALL)06/95]
DO NOT:
*
[IN07500(ALL)04/95]
q
Wash your vehicle with hot water
*
[IN07600(ALL)04/95]
q
Wash your vehicle while it sits in direct
sunlight
*
[IN07700(ALL)04/95]
q
Wash your vehicle while the body is hot
*
[IN07800(ALL)07/95]
Pollen, bird droppings and tree sap can damage
the paint, especially in hot weather. Wash your
vehicle as often as necessary to keep it clean.
*
[IN07900(ALL)07/95]
Take similar precautions if your vehicle is
exposed to chemical industrial fallout.
*
[IN08000(ALL)07/95]
Paint damage resulting from fallout is not
related to a defect in paint materials or
workmanship and therefore is not covered by
warranty. Ford, however, believes that continual
improvement in customer satisfaction is a high
priority. For this reason, Ford has authorized its
dealers to repair, at no charge to the owner, the
surfaces of new vehicles damaged by
environmental fallout within 12 months or 12,000
miles (20,000 km) of purchase, whichever comes
first. Customers may be required to bring their
vehicle in for inspection by a Ford
representative.
*
[IN08100(ALL)04/95]
Polish your vehicle to remove harmful deposits
and protect the finish.
File:02ctine.ex
Update:Tue Sep 19 14:42:23 1995
Page 11 of 387
9
Safety Restraints
%*
[SR00500(ALL)04/95]
Important Safety Belt Information
*
[SR00600(ALL)03/95]
The use of safety belts helps to restrain you and
your passengers in case of a collision. In most
states and in Canada the law requires their use.
*
[SR00700(ALL)08/95]
Safety belts provide best restraint when:
*
[SR00800(ALL)08/95]
q
the seatback is upright
*
[SR00900(ALL)08/95]
q
the occupant is sitting upright (not slouched)
*
[SR01000(ALL)08/95]
q
the lap belt is snug and low on the hips
*
[SR01100(ALL)08/95]
q
the shoulder belt is snug against the chest
*
[SR01200(ALL)08/95]
q
the knees are straight forward
[SR01300(ALL)06/95]
To help you remember to fasten your safety belt,
a warning light may come on and a chime may
sound. SeeSafety belt warning light/chimein the
Warning Lights and Gaugeschapter.
*
[SR01400(ALL)07/95]
See the following sections in this chapter for
directions on how to properly use these safety
belts. Also seeSafety Restraints for Childrenin this
chapter for special instructions about using
safety belts for children.
%*
[SR02000(ALL)05/95]
RWARNING
Make sure that you and your passengers
wear safety belts. Always drive and ride
with your seatback upright and the lap
belt snug and low across the hips.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995
Page 17 of 387
15 [SR04300(ALL)02/94]
If the driver does not fasten the lap belt before
the ignition key is turned to ON, the chime will
sound for four (4) to eight (8) seconds. The
safety belt warning indicator lamp in the
instrument cluster will also illuminate for one to
two minutes. In the unlikely event the shoulder
belt should stall before it reaches the B-pillar, the
indicator light will flash continuously until the
shoulder belt is in its locked position at the
B-pillar. If the indicator lamp remains
illuminated for more than one minute, check to
be sure that both shoulder belts are latched to
the emergency release buckle. If the indicator
lamp remains illuminated with both front seat
shoulder belts latched to the emergency release
buckles, refer to the section titledWhat To Do If
Your Shoulder Belt Does Not Engage Properly
before driving the vehicle.
[SR04400(ALL)04/93]
Use the shoulder belt on the outside shoulder
only. Never wear the shoulder belt under the
arm. Never swing it around your neck over the
inside shoulder. Never use a single belt for more
than one person. Failure to follow these
precautions could increase the risk and/or
severity of injury in a collision.
[SR04500(ALL)02/95]
When the ignition is in any position and the
door is opened, the shoulder belt will move
forward to the A-pillar. This will allow ample
room for the driver or passenger to exit from
the vehicle. DO NOT use the belt as an assist
handle when entering or exiting the vehicle. The
door should not be opened while the vehicle is
in motion.
[SR04550(ALL)09/95]
NOTE: Be sure to read and understand
Important Safety Belt Informationat
the beginning of this chapter.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995
Page 28 of 387
26 [SR07700(ALL)04/90]Shoulder Belt Emergency Release Buttons
[SR07800(ALL)02/94]
If the shoulder belt locks up in a collision, it
may stay locked. To unlock the belt, press the
emergency release button on the shoulder belt
buckle. This allows the tongue to unlatch from
the buckle. If the shoulder belt is unlatched and
partially retracted, a warning light in the
instrument panel lights up and remains on; the
warning chime sounds for about five (5) seconds.
[SR07900(ALL)02/95]
To insert the tongue back into the shoulder belt
buckle, push it in until you hear a click.
[SR07950(ALL)03/93]
If the belt does not lie flat against you, or the
belt has a twist in it at the retractor, unlatch the
belt at the buckle, remove twist, and relatch the
belt into the buckle.
[SR08000(ALL)10/89]
half page art:0000807-A
The emergency release button for the shoulder belt
[SR08100(ALL)04/93]
After a collision, refer toSafety Belt Maintenance
in this section.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995
Page 55 of 387
53
*
[SR13009(ALL)07/95]
RWARNING
Do not place objects or mount equipment
on or near the air bag cover on the
steering wheel or in front seat areas that
may come in contact with a deploying air
bag. Failure to follow this instruction may
increase the risk of personal injury in the
event of a collision.
%*
[SR13010(ALL)01/95]
How the Air Bag Supplemental Restraint
System Operates
*
[SR13020(ALL)09/95]
The Air Bag Supplemental Restraint System
consists of the Driver and Passenger air bags,
impact sensors, a system diagnostic module, a
readiness light and tone, and the electrical
wiring which connects the components. The
diagnostic module monitors its own internal
circuits and the supplemental air bag electrical
system readiness, including crash sensors, the
system wiring, the air bag readiness light, air
bag backup power, and the supplemental air bag
ignitors.
*
[SR13030(ALL)08/95]
The driver air bag is in the center of the steering
wheel. The front passenger seat air bag is
located in the center section of the instrument
panel ledge above the glove compartment. Both
air bags are designed to stay out of sight until
they are activated.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995
Page 58 of 387
56 [SR13045(ALL)09/95]
half page art:0011064-AInflated passenger side air bag
*
[SR13047(ALL)07/95]
RWARNING
If the air bag is inflated, THE AIR BAG
WILL NOT FUNCTION AGAIN AND
MUST BE REPLACED IMMEDIATELY. If
the air bag is not replaced, the unrepaired
area will increase the risk of injury in a
collision.
*
[SR13048(ALL)07/95]
To ensure that the air bag system will operate as
intended in a crash, the system is equipped with
a diagnostic module, which controls a readiness
lamp and a warning tone. The diagnostic
module monitors its own circuits, the air bag
electrical system, the air bag readiness light, the
air bag power, and the air bag inflators.
*
[SR13049(ALL)06/95]
The air bag system uses a readiness light on the
instrument cluster or a tone to indicate the
condition of the system. When you turn the
ignition to the ON position, this light will
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995
Page 59 of 387
57
illuminate for approximately six (6) seconds and
then turn off. This indicates that the system is
operating normally.NOTE:Maintenance of the
air bag system is not required.
%*
[SR13050(ALL)06/95]
A problem with the system is indicated by one
or more of the following:
*
[SR13055(ALL)06/95]
q
the readiness light will either flash or stay lit,
*
[SR13060(ALL)06/95]
q
or it will not light immediately after ignition
is turned on,
*
[SR13065(ALL)06/95]
q
or a group of five beeps will be heard. The
tone pattern will repeat periodically until the
problem and light are repaired.
*
[SR13090(ALL)08/95]
If any of these things happen, have the air bag
system serviced at your Ford or Lincoln-Mercury
dealer immediately. Unless serviced, the air bag
Supplemental Restraint System may not function
properly in the event of a collision.
*
[SR13120(ALL)07/95]
RWARNING
Do not attempt to service, repair, or
modify the Air Bag Supplemental
Restraint System or its fuses. See your
Ford or Lincoln-Mercury dealer.
%*
[SR13260(ALL)05/95]
Disposal of air bags or air bag equipped
vehicles
*
[SR13270(ALL)06/95]
For disposal of air bags or air bag equipped
vehicles, see your local Ford or Lincoln-Mercury
dealer. Air bagsMUSTbe disposed of by
qualified personnel.
[SR13273(ALL)08/95]
Service and information labels
[SR13275(ALL)08/95]
Service and information labels are attached to
the sun visor, on the headliner above the
driver's sun visor (Canadian vehicles), and near
the radiator support in the engine compartment.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995
Page 107 of 387
106 [ST03615(ALL)08/95]The automatic transaxle console-mounted
gearshift will lock only when you turn the key
to LOCK. When the gearshift is in any gear
position but P (Park), the ignition key cannot be
turned to LOCK or be removed from the
steering column.
[ST03620(ALL)02/95]
If you have a manual transaxle, you must push
the key in while turning to the LOCK position
in order to remove the key.
*
[ST03625(ALL)01/95]
LOCK is the only position that allows you to
remove the key. The LOCK feature helps to
protect your vehicle from theft.
[ST03635(ALL)09/95]
OFF (if equipped) allows you to shut off the
engine and all accessories without locking the
steering wheel.
*
[ST03650(ALL)07/95]
ACC (accessory) allows some of your vehicle's
electrical accessories such as the radio and the
windshield wipers to operate while the engine is
not running.
[ST03850(ALL)02/95]
ON allows you to test your vehicle's warning
lights (except the brake system warning light) to
make sure they work before you start the
engine. (The brake system warning light will
remain lit if the parking brake is set or if there
is a problem with the brake system.) The key
returns to the ON position once the engine is
started and remains in this position while the
engine runs.
[ST03900(ALL)02/95]
START cranks the engine. Release the key once
the engine starts so that you do not damage the
starter. The key should return to ON when you
release it. The START position also allows you
to test the brake system warning light.
File:04ctste.ex
Update:Tue Sep 19 14:42:54 1995
Page 110 of 387
109
*
[ST08400(ALL)01/95]
Before you start your vehicle, do the following:
*
[ST08500(ALL)08/95]
1. Make sure all occupants in the vehicle
buckle their safety belts. SeeSafety Restraints
in the Index for more details.
*
[ST08600(ALL)03/95]
2. Make sure the headlamps and other
accessories are turned off when starting.
*
[ST08700(ALL)02/92]
3.If you have an automatic transaxle, make
sure that the gearshift is in P (Park) and the
parking brake is set before you turn the key.
[ST08750(ALL)03/95]
If you have an automatic transaxle, your
vehicle has a special shift-lock safety feature.
It prevents you from moving the gearshift
lever out of the P (Park) position unless the
ignition is in the ON position and your foot
is on the brake. To move the gearshift lever,
you must also depress the thumb button.
*
[ST08800(ALL)07/93]
If you have a manual transaxle, make sure
that the parking brake is fully set, push the
clutch pedal to the floor, and put the
gearshift into Neutral before you turn the
key.(Remember, the starter will operate
only if the clutch pedal is pushed all the
way to the floor.)
[ST09000(ALL)06/95]
4. Before you start your vehicle, you should
check the warning lights on the instrument
panel to make sure that they work. Refer to
theWarning Lights and Gaugeschapter.
%*
[ST09400(ALL)02/95]
Starting Your Engine
*
[ST09500(ALL)06/95]
To start your engine:
*
[ST09600(ALL)05/95]
1. Follow the steps underPreparing to Start
Your Vehicleat the beginning of this section.
*
[ST09650(ALL)03/95]
2. Turn the ignition key to the ON position.
*
[ST09720(ALL)06/95]
3. DO NOT depress the accelerator pedal when
starting your engine. DO NOT use the
accelerator while the vehicle is parked.
File:04ctste.ex
Update:Tue Sep 19 14:42:54 1995