ECO mode FORD EXPEDITION 2005 2.G Quick Reference Guide

(if equipped)
For information on other types of radios,
please refer to your Owner’s Guide.
Scan Function– In radio mode, press
to hear a sampling of all listenable
stations. In CD mode, press to hear abrief sampling of all selections on the
current CD.
CD/AUX – Press to select CD/AUX modes.
No CD will display if there is not a CD
present in the audio system. If a disc is
loaded, there will be a number (16)
inside the circle on the display.
Loading CD– Press LOAD to open the
CD door, then load a CD into the player.
Press LOAD and then a preset number to
select a slot. Press and hold LOAD toactivate autoload.
Volume/Power Control – Push the
control to turn the audio system on or
off. Turn the control to raise or lowervolume. The speedsensitive volume
feature automatically adjusts radio
volume in accordance with vehicle speed
to compensate for road and wind noise.
To engage, press and hold the volume
control for five seconds (with the radio
on), then simultaneously press SEL tochoose the compensation level.
AM/FM Select – In radio mode, press
AM/FM to select AM or FM frequency
bands. In CD mode, press AM/FM to stop
play and begin radio play.
Satellite – Your Audiophile radio comes
equipped with satelliteready capability.
The kit to enable satellite reception is
available through your Ford dealer.
Detailed satellite instructions are included
with the dealerinstalled kit.
Disc/Tune CAT– In radio mode, press to
move to the next frequency up or down
the band. In CD mode, press to select a
disc in the CD player. CAT is only availablewhen equipped with satellite radio. The
kit to enable satellite reception is available
through your Ford dealer. Detailed
satellite instructions are included with the
dealerinstalled kit.
Digital Signal Processing– Press DSP and
then SEL to choose the desired signal
mode (DSP OFF, NEWS, JAZZ CLUB, HALL,
CHURCH, STADIUM).
Seek Function– In radio mode, press to
move to the next listenable station up or
down the band. In CD mode, press to
select the next/previous track on the
current disc.
Setting the Clock– Press MENU until
SELECT HOUR or SELECT MINUTE is
displayed. Press SEL to set the time. PressMENU again to disengage the clock mode.
Setting Memory Preset Stations– Select
AM, FM1, or FM2 band, then select a
station. Next, press and hold a numbered
control until the sound returns.
A
B
D
E
C
F
G
J
K
I
H
A
J
K
I
G
C
D
E
F
HB
CAUTION: DO NOT USE CD WITH ADHESIVE LABEL*
* CDs with adhesive labels and irregularly shaped CDs may get stuck in the CD player. Homemade
CDs should be identified with permanent felt tip marker rather than adhesive labels.

Folding the Outboard
Seats to a Load Floor Position
To fold the seats to a load floor position, lift
the lever (lever 1) located on the outboard
side of the seat to release the seat back.
Ensure that the seat back is locked in the
down position by applying pressure to it. To
lower the seat further to the fullylowered
position for maximum cargo capacity, locate
the pull strap at the front of the seat, then
pull forward to release the seat into a kneeldown load floor position. A moderate
force may be required to move the seat
forward and down.
Exiting the Third Row Seat
Pull up on the lever (lever 2) located at the
back of the second row seat. First, the seat
back will fold forward to the cushion, then
the seat will flip forward.
To return the seat to the upright position,
push the seat down and back until it is
latched to the floor. Then, lift the seat back
to the upright position.
Before folding the second row seats, ensure that the head restraints are fully lowered
and that all items have been removed from in front of and on the seats.
Entering the Third Row Seat
Pull up on the lever (lever 1) located on the side
of either outboard second row seat until the
seat back folds forward to the cushion. Pull up
on the lever (lever 2) located on the back of the
seat. The seat will then flip forward. lever 1
pull strap
lever 2

Audiophile SatelliteReady
InDash Six CD Radio (if equipped)
Please see reverse side for more details.
Rear Window Defroster
Press to activate rear window defrost. The
rear defrost indicator will illuminate. When
in operation, the rear window defroster
also defrosts the side view mirrors. The rear
window defroster will automatically turn
off after approximately 10 minutes of
operation. Press the control again to
reengage if needed.
Control Trac FourWheel Drive Control (if equipped)
2H (2WD HIGH) delivers power to
the rear wheels only, and is the
optimum position for
smoothness and fuel economy.
A4WD (4X4 AUTO) automatically
delivers power to all four wheels,
as required, for increased traction. 4H (4X4
HIGH) provides mechanically locked fourwheeldrive power to all four wheels. 4L (4X4 LOW)
provides mechanically locked fourwheel drive
when extra power at reduced speeds is required.
To shift from 2H to A4WD or 4H, move the
control at any forward speed up to 55 mph
(88 km/h). To shift from A4WD to 4H, move the
control at a stop or while driving at any speed. To
shift to or from 4L, bring the vehicle to a stop and
keep the brake pedal depressed. Next, place thegearshift in N (Neutral), and then move the
control to 4L.
When shifting from one fourwheel drive position
to the next, a mechanical noise may be heard. This
is normal and no service should be required.
Gearshift/Overdrive Control
Overdrive is the normal drive
position for the best fuel
economy. Only deactivate
(O/D OFF) overdrive when:
drivingwith a heavy load,
towing a trailer up ordown steep hills, or when
additional engine braking is desired. To
8
9
deactivate, press the switch located on the end
of the gearshift lever.
Note:The transmission shift strategy will
slightly delay transmission upshifts in cold
weather to decrease the time required to
warm up the engine and produce heat in
the passenger compartment.
Steering Wheel Controls (if equipped)
For audio control operation, press the
control with the musical note to select
which media to play. Depending on the
mode, press MEM to select a preset station,the next selection on a tape, or the nexttrack on a disc. Use VOL to adjust volume.
For climate control operation, press TMP up
or down to adjust temperature. Press the
control with the fan icon up or down toadjust fan speed.
Speed Control
To operate, the speed control
must be ON and the vehicle
speed must be greater than
30 mph (48 km/h). To set a
speed, press SET +. To set a
higher speed, press SET +
again. To set a lower
speed, press CST .
Pressing RES will return to
a previously set speed. To
turn the speed control off,
press the OFF button, or depress the brakepedal to disengage.
Power Adjustable Foot Pedals
Press and hold the rocker control
to adjust the accelerator and
brake pedal toward you or away
from you. Adjust the pedals
only when the vehicle is stopped
and the gearshift lever is in the
P (Park) position.
Hood Release
Pull the hood release handle toward you.
Next, release the auxiliary latch located
under the front center of the hood. Lift thehood until the lift cylinders hold it open.
10
13
14
15
11
12