garage door opener FORD EXPEDITION 2011 3.G Owners Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 2011, Model line: EXPEDITION, Model: FORD EXPEDITION 2011 3.GPages: 395, PDF Size: 2.72 MB
Page 101 of 395
UNIVERSAL GARAGE DOOR OPENER (IF EQUIPPED)
Your vehicle may be equipped with a universal garage door opener which
can be used to replace the common hand-held transmitter.
Car2UHome Automation System (if equipped)
The Car2UHome Automation
System is a universal transmitter
located in the driver’s visor that
includes two primary features – a
garage door opener and a platform
for remote activation of devices
within the home. The Car2U
system’s garage door opener
function replaces the common
hand-held garage door opener with a three-button transmitter that is
integrated into the interior of your vehicle. After being programmed for
garage doors, the Car2Usystem transmitter can be programmed to
operate security devices and home lighting systems.
WARNING:Make sure that people and objects are clear of the
garage door or security device you are programming. Do not
program the Car2Usystem with the vehicle in the garage.
Do not use the Car2Usystem with any garage door opener that lacks
safety stop and reverse features as required by U.S. Federal Safety
Standards (this includes any garage door opener manufactured before
April 1, 1982).
Be sure to keep the original remote control transmitter for use in other
vehicles as well as for future Car2Usystem programming. It is also
recommended that upon the sale or lease termination of the vehicle, the
programmed Car2Usystem buttons should be erased for security
reasons. Refer toErasing the Car2UHome Automation System
buttonslater in this section.
Read the instructions completely before attempting to program the
Car2Usystem. Because of the steps involved, it may be helpful to have
another person assist you in programming the transmitter.
Additional Car2Usystem information can be found on-line at
www.learcar2U.com or by calling the toll-free Car2Usystem help line at
1-866-572-2728.
Driver Controls
101
2011 Expedition(exd)
Owners Guide, 1st Printing
USA(fus)
Page 102 of 395
Types of garage door openers (rolling code and fixed code)
The Car2UHome Automation System may be programmed to operate
rolling code and fixed code garage door openers.
•Rolling code garage door openers were produced after 1996 and are
code protected. Rolling code means the coded signal is changed every
time your remote control garage door opener is used.
•Fixed code garage door openers were produced prior to 1996. Fixed
code uses the same coded signal every time. It is manually
programmed by setting DIP switches for a unique personal code.
If you do not know if your garage
door opener is a rolling code or
fixed code device, open your garage
door opener’s remote control battery
cover. If a panel of DIP switches is
present your garage door opener is
a fixed code device. If not, your
garage door opener is a rolling code
device.
Rolling code programming
Note:Programming the rolling code garage door opener involves
time-sensitive actions. Read the entire procedure prior to beginning so
you will know which actions are time-sensitive. If you do not follow the
time-sensitive actions, the device will time out and you will have to
repeat the procedure.
Note:Do not program the Car2Usystem with the vehicle in the garage.
Make sure that your key is on and engine off while programming the
transmitter.
12
34
5
6789
1
01
1
1
2
C
TS
206-1
2 T
124
O
N
Driver Controls
102
2011 Expedition(exd)
Owners Guide, 1st Printing
USA(fus)
Page 103 of 395
1. Firmly press the two outer
Car2Usystem buttons for
1–2 seconds, then release.
2. Go to the garage to locate the
garage door opener motor and its
“learn” button. You may need a
ladder to reach the unit and you may
need to remove the unit’s cover or
light lens to locate the “learn” button.
Press the “learn” button, after which
you will have 10–30 seconds to
return to your vehicle and complete
the following steps. If you cannot
locate the “learn” button, refer to the
Owner’s Guide of your garage door opener or call the toll-free Car2U
system help line at 1-866-57Car2U (1-866-572-2728).
3. Return to your vehicle. Press and
hold the Car2Usystem button you
would like to use to control the
garage door. You may need to hold
the button from 5–20 seconds,
during which time the selected
button indicator light will blink
slowly. Immediately (within
1 second) release the button once the garage door moves. When the
button is released, the indicator light will begin to blink rapidly until
programming is complete.
4. Press and release the button again. The garage door should move,
confirming that programming is successful. If your garage door does not
operate, repeat the previous steps in this section.
After successful programming, you will be able to operate your Car2U
system by pressing the button you programmed to activate the opener.
The indicator light above the selected button will turn on to confirm that
the Car2Usystem is responding to the button command.
Driver Controls
103
2011 Expedition(exd)
Owners Guide, 1st Printing
USA(fus)
Page 104 of 395
To program another rolling code device such as an additional garage door
opener, a security device or home lighting, repeat Steps 1 through 4
substituting a different function button in Step 3 than what you used for
the garage door opener. For example, you could assign the left-most
button to the garage door, the center button to a security device, and
the right-most button to another garage door opener.
Note:The Car2Usystem allows for three devices to be programmed. If
you need to change or replace any of the three devices after it has been
initially programmed, it is necessary to erase the current settings using
theErasing the Car2UHome Automation System buttonsprocedure
and then programming all of the devices being used.
Fixed code programming
Note:Do not program the Car2Usystem with the vehicle in the garage.
Make sure that your key is on and engine off while programming the
transmitter.
1. To program units with fixed code DIP switches, you will need the
garage door hand-held transmitter, paper and a pen or pencil.
2. Open the battery cover and record the switch settings from left to
right for all 8 to 12 switches. Use the figure below:
When a switch is in the up, on, or + position, circle “L.”
When a switch is in the middle, neutral, or 0 position, circle “M.”
When a switch is in the down, off, or – position, circle “R.”
Switch position1234567 8 9101112
Up,onor+ LLLLLLLLLLLL
Middle, neutral or 0MMMMMMMMMMMM
Down, off or –RRRRRRRRRRRR
L=left; M=middle; R=right
Driver Controls
104
2011 Expedition(exd)
Owners Guide, 1st Printing
USA(fus)
Page 105 of 395
3. To input these positions into the
Car2Usystem, simultaneously
press all three Car2Usystem
buttons for a few seconds and then
release to put the device into
programming mode. The indicator
lights will blink slowly. Within
2.5 minutes enter your
corresponding DIP switch settings
from left to right into your Car2Usystem by pressing and releasing the
buttons corresponding to the settings you circled.
4. After inputting switch settings, simultaneously press and release all
three Car2Usystem buttons. The indicator lights will turn on.
5. Press and hold the Car2U
system button you would like to use
to control the garage door.
Immediately (within 1 second)
release the button once the garage
door moves. During this time the
selected button indicator light will
blink slowly. Do not release the
button until you see the garage door move. Most garage doors open
quickly. You may need to hold the button from 5–55 seconds before
observing movement of the garage door.
6. The indicator light will (begin to) blink rapidly until programming is
complete. If your garage door opener does not operate following these
steps, repeat Steps 2 through 6. Otherwise, call the toll-free Car2Uhelp
line at 1-866-57Car2U (1-866-572-2728).
After successful programming, you will be able to operate your Car2U
system by pressing the button you programmed to activate the opener.
The indicator light above the selected button will turn on to confirm that
the Car2Usystem is responding to the button command.
Erasing the Car2UHome Automation System buttons
Note:The system allows for three devices to be programmed. If you
need to change or replace any of the three devices after it has been
initially programmed, it will be necessary to erase the current settings
using the procedure below and then reprogramming all of the devices
being used.
Driver Controls
105
2011 Expedition(exd)
Owners Guide, 1st Printing
USA(fus)
Page 391 of 395
filter, specifications ........325, 353
recommendations ...................325
refill capacities ........................354
specifications ..........................354
Event data recording ....................7
Exhaust fumes ..........................241
F
Fail safe cooling ........................332
Fleet MyKey programming ......115
Flexible Fuel Vehicle (FFV) ....334
Floor mats .........................106–107
Fluid capacities .........................354
Fog lamps ....................................71
Four-Wheel Drive vehicles .......264
control trac .............................265
description ..............................265
driving off road .......................267
indicator light .........................265
preparing to drive your
vehicle .....................................253
Fuel ............................................334
calculating fuel
economy ......................23, 31, 341
cap ...........................................337
capacity ...................................354
choosing the right fuel ...........338
detergent in fuel .....................340
filler funnel .............................340
filling your vehicle with
fuel ...........................334, 337, 341
filter, specifications ........334, 353
fuel pump shut-off switch .....277
improving fuel economy ........341
octane rating ...........338, 358–359
quality ......................................339
running out of fuel .........296, 340safety information relating to
automotive fuels .....................334
Fuel - flex fuel vehicle
(FFV) .................................334, 338
Fuses ..................................278–279
G
Garage door opener ..................101
Gas cap (see Fuel cap) ............337
Gas mileage (see Fuel
economy) ...................................341
Gauges .........................................18
H
Hazard flashers .........................276
Headlamps ...................................71
aiming ........................................73
autolamp system .......................71
bulb specifications ....................77
daytime running lights .............72
flash to pass ..............................72
high beam .................................72
replacing bulbs .........................78
turning on and off ....................71
Heating
heating and air conditioning
system .................................60–61
Hood ..........................................319
I
Ignition .......................237, 358–359
Illuminated visor mirror .............84
Infant seats
(see Safety seats) .....................187
Index
391
2011 Expedition(exd)
Owners Guide, 1st Printing
USA(fus)
Page 394 of 395
What Maintenance Schedule
Should You Follow? ................370
Seats ..........................................138
child safety seats ....................187
cleaning ...................................316
climate control ........................147
heated ......................................155
memory seat ...................127, 145
SecuriCode keyless entry
system ........................................130
SecuriLock passive anti-theft
system ................................132–133
Servicing your vehicle ..............318
Setting the clock
AM/FM single CD .....................41
Snowplowing .................................6
SOS Post Crash Alert ...............182
Spark plugs, specifications ......353,
358–359
Special notice
utility-type vehicles ....................6
Specification chart, lubricants .354
Speed control ..............................96
Stability system .........................246
Starting a flex fuel vehicle .......240
Starting your vehicle ........237–240
jump starting ..........................296
Steering wheel
controls ......................................98
tilting .........................................84
SYNC..........................................59
T
Third-row power fold seat .......158
Tilt steering wheel ......................84Tire Pressure Monitoring
System (TPMS)
Driving .....................................270
Tires, Wheels and Loading ....219
Warning Displays ..........12, 26, 35
Tires ...........................204–206, 286
alignment ................................213
care ..........................................209
changing ..........................286, 290
checking the pressure ............209
inflating ...................................207
label .........................................218
replacing ..................................211
rotating ....................................213
safety practices .......................212
sidewall information ...............214
snow tires and chains ............223
spare tire .................................286
terminology .............................206
tire grades ...............................205
treadwear ........................205, 209
Towing .......................................231
recreational towing .................236
trailer towing ..........................231
wrecker ....................................300
Transmission .............................256
brake-shift interlock
(BSI) ................................254–255
fluid, checking and adding
(automatic) .............................348
fluid, refill capacities ..............354
lubricant specifications ..........354
Turn signal ..................................74
U
Universal garage door
opener ........................................101
USB port ......................................48
Index
394
2011 Expedition(exd)
Owners Guide, 1st Printing
USA(fus)