instrument cluster FORD EXPLORER 1996 2.G User Guide

264
[DR22965(ALL)05/95]
Should a malfunction in the 4WABS system occur, the ABS light
on the instrument cluster will come on and stay on indicating
that the anti-lock system has been shut down and the vehicle
needs to be serviced. Normal braking is not affected unless the
brake warning light is also illuminated.
*
[DR22970(ALL)09/95]
NOTE: It is important to note that when the ABS Warning
Light is illuminated the ABS system is disabled. The
vehicle must be serviced immediately to restore the
benefits of the Anti-lock system.
*
[DR22975(ALL)09/95]
NOTE: Mobile phones or radio transmitters not installed by
Ford Motor Company may interfere with the Anti-lock
System. Should the Anti-lock system activate
unexpectedly or the Anti-lock Warning Light
illuminate after installation of such a unit, have the
installation of the unit checked.
%*
[DR23000(ALL)12/89]
If Brakes Do Not Grip Well or Pedal is ªLowº
*
[DR23250(ALL)11/89]
If during normal operation the brake pedal seems ªlowº, it may
indicate the need for a brake system inspection and/or service.
You should have your brakes checked as soon as possible.
*
[DR23300(X)07/95]
Occasional brake squeal during light to moderate stops does not
affect the function of the brake system and is normal. However,
if the squeal becomes louder or more frequent, have your
brakes inspected by your dealer or a qualified service technician.
*
[DR23400(ALL)11/89]
RWARNING
Modifications to the suspension spring rates and/or
vehicle ride height may adversely affect vehicle stopping
ability.
File:10undrx.ex
Update:Thu Feb 29 09:12:36 1996

316
[RE31200(ALL)10/94]
To return the vehicle to a towable condition, youmust:
[RE31300(ALL)10/94]
n
Place the transfer case in 2WD by rotating the 4WD switch
to 2WD.
[RE31400(ALL)10/94]
NOTE: Both the 4WD and 4WD Low indicator lights in the
instrument cluster will be off when the transfer case
is in 2WD.
[RE31500(ALL)10/94]
n
After 2WD is selected, the front hubs must be ªunlockedº by
moving the vehicle in reverse direction for a minimum of ten
feet.
[RE31600(ALL)10/94]
n
Confirm the front hubs are unlocked by inspecting the front
drive shaft to verify it does not turn when the vehicle is
towed.
[RE31700(ALL)10/94]
In addition to the above guidelines, it is recommended that you
follow the instructions provided by the manufacturer of the
towing apparatus.
File:12unrex.ex
Update:Thu Feb 29 09:14:34 1996

Servicing Your Explorer
379
[SV37500(ALL)04/94]
7-1/2 pica art:0020382-C
Brake master cylinder
%*
[SV37600(ALL)03/95]
Power Steering Fluid
*
[SV37700(ALL)01/95]
Check the level of the power steering fluid at least twice a
year (i.e., every Spring and Fall).
%*
[SV37800(ALL)03/95]
Checking and Adding Power Steering Fluid
*
[SV37900(ALL)02/95]1.
Start the engine and let it run until the power steering fluid
reaches normal operating temperature. The power steering
fluid will be at the right temperature when the engine
coolant temperature gauge in the instrument cluster is near
the center of the NORMAL operating temperature range.
*
[SV38000(ALL)01/95]2.
While the engine idles, turn the steering wheel back and
forth several times. Make sure that the cap assembly is
installed at this time.
*
[SV38100(ALL)05/95]3.
Turn the engine off.
%*
[SV38200(ALL)03/94]4.
Check the fluid level on the dipstick (which is highlighted in
yellow in your vehicle). The fluid level should be between
the arrows in the FULL HOT range, which is marked on the
side of the dipstick, opposite the side marked FULL COLD.
Do not add fluid if the level is within the FULL HOT range.
File:15unsvx.ex
Update:Thu Feb 29 09:20:34 1996

417
[QI06100( X)07/95]
full page art:0090105-B
Instrument cluster
File:16unqix.ex
Update:Thu Feb 29 10:11:57 1996

432
High beams
indicator light.................... 91
operation....................127, 136
High-mount brakelamp, description........... 134
High-mount brakelamp:location............. 134
Hitch......................... 289
Hood
latch location.................... 335
lubrication specifications............... 406
release lever.................... 335
working under the hood............... 334
Horn......................... 140
Hoses, checking.................... 355
I
Identification Number, Vehicle (VIN).......... 318
Idle
relearning.................298, 334, 372
speed........................ 72
Ignition
chime........................ 68
positions of the ignition................ 67
removing the key................... 68
Indicator lights and chimes (see Lights).......... 79
Infant seats (see Safety seats)............. 32,52
Instrument cluster.................... 79
mechanical...................... 81
Instrument panel
lighting up panel and interior............ 132
location of components............... 109
registers...................... 110
Integrated child seat (see Built-in child seat)........ 34
Interval wipers.................... 136
File:unixx.ex
Update:Thu Feb 29 09:21:09 1996