jack points FORD F150 2013 12.G Owners Manual

Box Side Step (If Equipped)
The box side step allows easier access to the truck bed.
Note:Do not drive the vehicle with a box side step in the deployed
position.
Note:The box side step load carrying capability (one person plus cargo)
is 500 pounds (227 kilograms). Do not exceed this amount.
Note:Do not use the box side steps to lift the vehicle when jacking.
Utilize proper jacking points.
Note:The box side steps may operate slower in cooler temperatures.
Debris such as mud, dirt, snow, ice and salt may become trapped in the
box side step mechanism. This may cause the box side step to not
deploy automatically after pressing the button. If this occurs, make sure
that the button is pressed down and carefully manually pull out the box
side step. Wash off the debris with a high-pressure car wash wand and
re-stow the step.
To deploy the box side step, push
down on the button with your foot.
The step will automatically extend
out from the stowed position.
To stow the box side step, push the
box side step under the truck with
your foot until it is fully latched. Do
not push on the button while
stowing the box side step.
254Load Carrying
2013 F-150(f12)
Owners Guide gf, 1st Printing
USA(fus)

POWER DEPLOYABLE RUNNING BOARDS (IF EQUIPPED)
WARNING:In extreme climates, excessive ice buildup may
occur, causing the running boards not to deploy. Be sure that the
running boards have deployed, and have finished moving before
attempting to step on them. The running boards will resume normal
function once the blockage is cleared.
WARNING:Turn off the running boards before jacking or placing
any object under the vehicle. Never place your hand between the
extended running board and the vehicle. A moving running board may
cause injury.
Note:Do not use the running boards, front and rear hinge assemblies,
running board motors, or the running board under body mounts to lift
the vehicle when jacking. Always use proper jacking points.
Note:The running boards may operate slower in cooler temperatures.
Debris such as mud, dirt and salt may become trapped in the running
board mechanism, possibly leading to unwanted noise. If this occurs,
manually set the running boards to the deployed position and flush the
system (in particular the front and rear hinge arms) with a high-pressure
car wash wand.
The running boards automatically
move when the doors are opened to
assist entering and exiting the
vehicle.
Automatic Power Deploy
The running boards will extend down and out when the doors are
opened.
Load Carrying257
2013 F-150(f12)
Owners Guide gf, 1st Printing
USA(fus)