cam FORD FIESTA 2007 Workshop Manual

2007 WQ Fiesta
(including XR4)
Repair Manual
Registered at the National Library,
Canberra, ACT Australia
ISBN 1 921 140 151 (Set)
ISBN 1 921 140 16X (Volume 1 )
ISBN 1 921 140 178 (Volume 2)
ISBN 1 921 140 186 (Volume 3)
O 2007 Ford Motor Company of Australia Ltd.
Registered Office: CAMPBELLFIELD, VICTORIA
A.B.N. 30 004 116 223
Reproduction in whole or in part is prohibited without
written approval.
PRINTED IN AUSTRALIA. May
2007
CONTENTS
procarmanuals.com

2006.0 Fiesta
Workshop Manual
Table of Contents
GROUP 1 General lnformation
Service lnformation
General lnformation
Identification Codes
Jacking and Lifting
Noise, Vibration and
Harshness
Suspension
Suspension System - General
lnformation
Front Suspension
Rear Suspension
Wheels and Tires
Driveline
Front Drive Halfshafts
Brake System
Brake System - General
Information
Drum Brake
Front Disc Brake
Rear Disc Brake
Parking Brake and Actuation
Hydraulic Brake Actuation
Power Brake Actuation
Anti-Lock Control
Anti-Lock Control
- Traction
Control
Anti-Lock Control
- Stability
Assist
Steering System
Steering System - General
lnformation
Power Steering Steering Linkage
Steering Column
Steering Column Switches
Engine
Engine System - General
lnformation
Engine
- 1.25L Duratec-1 6V
(Sigma)/l.4L Duratec-1 6V
(Sigma)/l.GL Duratec-I 6V
(Sigma)
Engine
- 2.OL Duratec-HE
(MI41
Engine Cooling - 1.3L Duratec-8V
(Rocam)/l.25L Duratec-1 6V
(Sigma)/l.4L Duratec-1 6V
(Sigma)/l .6L Duratec-1 6V
(Sigma)
Engine Cooling
- 2.OL Duratec-HE
(MI41
Fuel Charging and Controls - 1.25L
Duratec-1 6V (Sigma)/l.4L
Duratec-16V (Sigma)/l.GL
Duratec-1 6V (Sigma)
Fuel Charging and Controls
- 2.OL
Duratec-HE (M14)
Accessory Drive
Starting System
Engine lgnition
Engine Ignition
- 2.OL Duratec-HE
(M14)
Engine Emission Control - 1.3L
Duratec-8V (Rocam)/l.25L
Duratec-1 6V (Sigma)/l.4L
Duratec-1 6V (Sigma)/l .6L
Duratec-1
6V (Sigma)
Engine Emission Control
- 2.OL
Duratec-HE (M14)
05/2005 2006.0 Fiesta
procarmanuals.com

Intake Air Distribution and
- Filtering
303-1 2
Evaporative Emissions 303-1 3
Electronic Engine Controls 303-14
Automatic Transmission/Transaxle
Automatic TransmissionlTransaxle -
Vehicles With: 4-Speed Automatic
Transmission
(AW81-40) 307-01
TransmissionlTransaxle Cooling -
Vehicles With: 4-Speed Automatic
Transmission
(AW81-40) 307-02
Automatic
TransmissionlTransaxle
External Controls - Vehicles With:
4-Speed Automatic Transmission
(AW8 1 -40) 307-05
Manual Transmissionrrransaxle, Clutch and
Transfer Case
Manual TransmissionlTransaxle and
Clutch
- General Information 308-00
Clutch 308-0 1
Clutch Controls 308-02
Manual
Transmission/Transaxle 308-03
Manual TransmissionlTransaxle
External Controls 308-06
Exhaust System
Exhaust System 309-00
Fuel System
Fuel System - General
Information 31 0-00
Fuel Tank and Lines
31 0-01
Acceleration Control - I .3L Duratec-8V
(Rocam)ll.25L Duratec-I 6V
Instrumentation and Warning Systems
lnstrument Cluster and Panel
(
Illumination 41 3-00
Instrument Cluster
413-01
Horn 41 3-06
lnformation and Message
Center 41 3-08
Warning Devices
4 1 3-09
Parking Aid 41 3-1 3
Battery and Charging System
Charging System - General
Information 4 14-00
Battery, Mounting and Cables 414-01
Generator and Regulator 41 4-02
lnformation and Entertainment Systems
lnformation and Entertainment System
- General Information 41 5-00
Audio Unit 41 5-01
Antenna 41 5-02
Lighting
Exterior Lighting 41 7-01
Interior Lighting 4 1 7-02
Electrical Distribution
Module Communications ( 'j
Network 41 8-00
Module Configuration 41 8-01
Electronic Feature Group
Anti-Theft - Active 419-01A
Anti-Theft
- Passive 41 9-01 B
Cellular Phone 41 9-08
Multifunction Electronic
Modules 41 9-1 0
Climate Control System
Climate Control System - General
Information
Air Distribution and Filtering
Heating and Ventilation
Air Conditioning
Control Components
(Sigma)ll.4L Duratec-I 6V
lnterior Trim and
Ornamentation
Exterior Trim and
Ornamentation
Rear View Mirrors
Seating
Glass, Frames and
Mechanisms
(Sigma)/l .6L Duratec-1 6V
Instrument Panel and Console 501 -1 2
0512005 2006.0 Fiesta
GROUP 5 Body and Paint
(Sigma) 3 1 0-02A
Acceleration Control
- 2.OL Duratec-HE Body and Paint
(M14) 31 0-028 Body System - General
Information 501 -00
GROUP 4 Electrical Front End Body Panels 50 1 -02
Body Closures 50 1 -03
procarmanuals.com

GROUP
Powertrain
SECTION TITLE PAGE
Engine
Engine System . General Information ........................................................................\
.... 303-00
Enginel.25L Duratec-I 6V (Sigma)ll.4L Duratec-1 6V (Sigma)ll . 6L Duratec-I 6V
........................................................................\
.............................................. (Sigma) -303-0 I A
........................................................................\
............... Engine2.0L Duratec-HE (M14) .30 3-01 B
Engine
Cooling1.3L Duratec-8V (Rocam)ll.25L Duratec-I 6V (Sigma)ll.4L
Duratec-1 6V (Sigma)ll . 6L Duratec-1 6V (Sigma) ...................................................... .30 3-03A
Engine
Cooling2.0L Duratec-HE (M14) ........................................................................\
.. 303-038
Fuel Charging and Controlsl.25L Duratec-1 6V (Sigma)ll.4L Duratec-1 6V
........................................................................\
... (Sigma)ll . 6L Duratec-1 6V (Sigma) .30 3-0414
Fuel Charging
and Controls2.0L Duratec-HE (M14) ....................................................... 303-04B
........................................................................\
.................................... Accessory Drive .30 3-05
Starting System
........................................................................\
...................................... 303-06
Engine Ignition
........................................................................\
....................................... 303-07A
Engine Ignition2.01 Duratec-HE (M14) ........................................................................\
... 303-07B
Engine Emission
Controll.3L Duratec-8V (Rocam)ll.25L Duratec-1 6V (Sigma)ll.4L
Duratec-1 6V (Sigma)ll . 6L Duratec-1 6V (Sigma) ...................................................... .30 3-08A
Engine Emission
Control2.0L Duratec-HE (M14) ........................................................... 303-088
........................................................................\
........ Intake Air Distribution and Filtering 303-1 2
........................................................................\
.......................... Evaporative
Emissions .30 3-13
........................................................................\
.................... Electronic Engine Controls .304 3-1
Automatic Transmission/Transaxle
Automatic Transmission/TransaxleVehicles With: 4-Speed Automatic Transmission
........................................................................\
......................................... (AW8 1 .40) .301 7.0
Transmission/Transaxle CoolingVehicles With: 4-Speed Automatic Transmission
........................................................................\
.......................................... (AW81-40) 307-02
Automatic
TransmissionlTransaxle External ControlsVehicles With: 4-Speed
........................................................................\
.. Automatic Transmission (AW81-40) .30 7.05
Manual Transmission/Transaxle. Clutch and Transfer Case
Manual Transmission/Transaxle and Clutch . General Information ............................... 308-00
........................................................................\
.................................................... Clutch .301 8.0
........................................................................\
..................................... Clutch Controls .30 8.02
Manual
TransmissionlTransaxle ........................................................................\
............ 308-03
Manual
TransmissionlTransaxle External Controls ........................................................ 308-06
0512005 2006.0 Fiesta
procarmanuals.com

Exhaust System (I
Exhaust System ........................................................................\
..................................... 309-00
Fuel System
Fuel System
- General Information ........................................................................\
.... 310-00
Fuel Tank and Lines..
........................................................................\
............................ .310-01
Acceleration Controll.3L Duratec-8V (Rocam)ll.25L Duratec-1 6V (Sigma)ll.4L
Duratec-1 6V (Sigma)ll .6L Duratec-1 6V (Sigma) ....................................................... 310-02A
Acceleration
Control2.0L Duratec-HE (M14) .............................................................. 30-02B
0512005 2006.0 Fiesta
procarmanuals.com

100-00-3 General Information 100-00-3
DESCRIPTION AND OPERATION
About This Manual
-- . Introduction
This manual has been written in a format that is
designed to meet the needs of technicians
worldwide. The objective is to use common formats
and include similar content in each manual.
This manual provides general descriptions for accomplishing diagnosis and testing, service and
repair work with tested, effective techniques.
Following them will help assure reliability.
Special Tools
The special tool(s) table provided at the beginning
of each procedure shows all special tools required
to carry out a repair. Where possible, illustrations
are provided to assist in identifying the special tool
required.
Important Safety Instructions
Appropriate service methods and correct repair
--.! procedures are essential for the safe, reliable
operation of all motor vehicles as well as the
personal safety of the individual carrying out the
work.
This manual cannot possibly anticipate all such
variations and provide advice or cautions as to
each. Anyone who departs from the instructions
provided in this manual must first establish that he
compromises neither his personal safety nor the
vehicle integrity by his choice of methods, tools or
components.
Warnings, Cautions and Notes in This
Manual
A WARN1NG:Warnings are used to indicate
that failure to follow a procedure correctly
may result in personal injury.
A warning, caution or note is placed at the
beginning of a series of steps if it applies to multiple
steps. If the warning, caution or note only applies
to one step, it is placed at the beginning of the
specific step (after the step number).
How to Use This Manual
This manual covers diagnosis and testing, service
and repair procedures.
This manual is structured into groups and sections,
with specific system sections collected together
under their relevant group.
A group covers a specific portion of the vehicle.
The manual is divided into five groups, General
Information, Chassis, Powertrain, Electrical and
Body and Paint. The number of the group is the
first number of a section number.
Pages at the start of the manual list all sections
available. Each section has a contents list detailing
Specifications, Description and Operation,
Diagnosis and Testing, In Vehicle Repairs,
Disassembly and Assembly, Removal and
Installation.
If components need to be removed or
disassembled in sequence, the sequence will be
identified numerically in a graphic and the
corresponding text will be numbered accordingly.
All left and right-hand references to the vehicle are
taken from a position sitting in the driver seat
looking forward.
All left and right-hand references to the engine are
taken from a position at the flywheel looking
towards the front camshaft pulley.
Where appropriate, instructions will be given for
the use of the diagnostic tool.
Overview Procedures
Overview procedures contain an exploded view
A CAUTI0N:Cautions are used to indicate illustration(s). The numbered sequence within the
that failure to follow a procedure correctly illustration(s) indicate the order to be followed when
may result in damage to the vehicle or removingldisassem bling or when
equipment being used. installinglassembling a component. Additional
information,
symbol(s) or a torque figure, may also
, , N0TE:Notes are used to provide additional
be shown alonaside the com~onent.
essential information required to carry out a
complete and satisfactory repair. There are
ten symbols used to give additional
information when
removina/disassemblincr or when V AS YOU read through this manual, YOU will come /"itallinglassembling a c&ponent.
across WARNINGS, CAUTIONS and NOTES.
2006.0 Fiesta 1212006 GI 7371 en
procarmanuals.com

I 00-01 -8 Identification Codes 100-01 -8
DESCRIPTION AND OPERATION
I Code I Interior Trim I
I TB I Bussac - Light Stone I
RK
RR
I TL I Leather - Light Stone 1
- -
Compass - Red
Compass
- Red
I VK I Compass - Silver I
ltem 14: Transaxle Final Drive Ratio
ltem 15: Transaxle Codes Code
A
B
M
R 3
4
Transaxle Final Drive Ratio
3.37
4.06
4.05
4.25
4.375
3.82
Code Transaxle
5-Speed Manual Transaxle (iB5)
I A I 1.3L Duratec-8V (Rocam) (60PS) I
B
C
ltem 16: Engine Codes
I H I 1.6L Duratorq-TDCi (DV) Diesel (90PS) I
5-Speed Manual Transaxle (iB5) Automated Shift Manual
4-Speed Automatic Transaxle
(AW81- 40LE)
Code Engine
I Y I 1.6L Duratec-1 6V (Sigma) (1 OOPS) 1
U
X
I 6 I 1.4L DuraTorq-TDCi (DV) (68PS) I
1.25L Duratec-1 6V (Sigma) (75PS)
1.4L Duratec-1 6V (Sigma) (80PS)
I 7 I 1.25L Duratec-I 6V (Sigma) (70PS) I
I 9 I 1.3L Duratec-8V (Rocam) (70PS) I
ltem 17: Hand of Drive
(I
Code
1
2
3
2006.0 Fiesta 1212006 G413286en
Drive
Left-hand drive
Right-hand drive Left-hand drive
procarmanuals.com

100-04-2 Noise, Vibration and Harshness 100-04-2
DESCRIPTION AND OPERATION
Noise, Vibration and Harshness (NVH)
Noise, vibration and harshness (NVH) is becoming
more important as vehicles become more '
Know the History of the Condition
sophisticated and passenger comfort levels
increase. This section is designed to aid in the
- Did it start suddenly or appear gradually?
diagnosis and testing and repair of NVH concerns.
- Was it related to some other occurrence such
- Noise is defined as sounds not associated with
as a collision or previous part replacement?
the operation of passenger compartment
- Know how the condition made itself known; it
equipment that interface with customer
may be an important clue to the cause.
satisfaction.
- Vibration is defined as impulses felt by the
customer that are not caused by road surface Know the Probability of Certain
changes. Conditions Develop~ng
- Harshness is a ride quality issue where the - Look for the simple rather than the complex.
customer feels that the vehicle response to the
road surface is sharply transmitted to the
- For example:
customer.
- Electrical conditions usually occur at
connections rather than components.
Diagnostic Theory - An engine no-start is more likely to be caused
by a loose wire or small adjustment rather
than a sheared-off
camshafi. Diagnosis is more than just following a series of
interrelated steps in order to find the solution to the - Know the difference between impossible and
specific condition. It is a way of looking at systems improbable. Certain failures
in a system can be
that are not functioning the way they should and improbable
but still happen.
finding out why. Also it is knowing how the system
- New parts are just that, new. It does not mean
should work and whether it is working correctly. they are always
good functioning parts.
There are basic rules for diagnosis. If these rules
are followed, the cause of the condition is usually
Do Not Cure the Symptom and Leave
found the first time through the system. the Cause
Know the System
- Know how the parts go together. Lowering
the pressure in a front tire may correct
the condition of a vehicle leaning to one side, but
it does not correct the original condition.
- Know how the system operates as well as its
limits and what happens when the system goes
Be Positive the Cause is Found
wrong.
- Sometimes this means checking the system - Double check findings.
against one that is known to be working
- What caused a worn component?
correctly.
- A loose transmission or engine mount could
indicate that other mounts are also loose.
Know the History of the System
Diagnostic Charts
A clue in any one of these areas may save time:
- How old or new is the system? Charts are a simple
way of expressing the
relationship between basic logic and a physical
- What kind of treatment has it had?
system of components. They help discover the ,.
- Has it been serviced in the past in such a
cause of a condition in the least time. Diagnostic (,-
manner that might relate to the present
charts combine many areas of diagnosis into one
condition? visual display:
- What is the service history?
2006.0 Fiesta 12/2006 G28448en
procarmanuals.com

204-00-2 Suspension System - General Information 204-00-2
SPECIFICATIONS
Caster angle
Front Wheel Alignment (at curb weight)
Degrees and / 4'38'to 2'38' 1
minutes
Maximum Vari-
ance Left or Right
Description
I Camber angle I Degrees
and 1 0°36'to -1'54' 1 -0'39' I 1'15'
Decimal degrees
Tolerance Range
Setting or
Nominal
4.64" to 2.64"
Total toe
Degrees and minutes
Front Wheel Alignment (at curb weigh
Description
3.64"
minutes
Decimal degrees mm
Decimal degrees
Tolerance Range Setting or
I Nominal
1 .OOO
Maximum Vari-
ance Left or Right
0.60" to -1 .90°
3.1Toeink2.2
- 0'30' Toe in k 0'21'
0.50" Toe in k 0.35"
Caster angle
0'30 Toe in + 0°1 0'
Degrees and minutes -0.65"
3.1Toeink1.0
0.50"
Toe in k 0.1 7"
Decimal degrees
1.25"
-
-
Camber angle Degrees and
minutes
Decimal degrees
Total toe
Degrees and
minutes
0°09' Toe in k 0°20' 1 0°09' Toe in k 0°10'
Decimal degrees 0.15" Toe in k 0.34" ( 0.15" Toe in k 0.1 7"
Caster
angle
Front Wheel Alignment (at curb weight) - %Door Sport
Description
Camber angle
Degrees and minutes
Decimal degrees Degrees and
1 0'25' to -2'08' 1 -0'52'
minutes
Decimaldegrees
1 0.4I0to-2.13" 1 -0:86"
Maximum Vari-
ance Left or Right
Tolerance Range
4'39' to 2'34'
4.65"
to 2.57"
Total toe
Setting or
Nominal
Degrees and 0'30' Toe in k 0'21' 0'30 Toe in k 0°10'
minutes
3"37'
3.61"
I Decimal degrees 1 0.50" Toe in k 0.35" 1 0.50" Toe in k 0.17" 1 - I
1°00'
1
.OOO
2006.0 Fiesta 1212006 G149884en
procarmanuals.com

204-00-5 Suspension System - General Information 204-00-5 --
DIAGNOSIS AND TESTING
Symptom Possible
Sources -
l ncorrect front crossmem ber
alignment.
Action
Using the special tool, CHECK
the front crossmember align- ment.
Worn front wheel bearings. CHECK
the wheel bearings.
REFER to: Wheel Bearing
lnspection (204-00 Suspen-
sion System
- General
Information, General Proced-
ures).
I Wheels and tires. I . GO to Pinpoint Test A. I
Steering wheel off-center Vehicle attitude incorrect (front
or rear is high or low).
Tracks incorrectly CHECK for abnormal loading,
spring sag or non-standard
springs.
-
Steering gear or linkage worn
or damaged. CHECK the steering system.
REFER to: (21 1-00 Steering
System
- General Information)
Steering System (Diagnosis and Testing),
Steering System
- 1.6L
Duratorq-TDCi (DV) Diesel
(Diagnosis and Testing).
Suspension lower arm ball
joint. CARRY
OUT the Ball Joint
lnspection component test in
this procedure.
lncorrect wheel alignment. ADJUST
the wheel alignment.
REFER to: Specifications (204-
00 Suspension System
-
General Information,
Specifications).
lncorrect front suspension toe,
castor or camber angles. CHECK
the wheel alignment.
REFER to: Specifications (204-
00 Suspension System
-
General Information,
Specifications).
INSTALL new suspension
components as necessary.
~ncorrecGar suspension toe
or camber angles. CHECK
the wheel alignment.
REFER to: Specifications (204-
00 Suspension System
-
General Information,
Specifications).
INSTALL new suspension
components as necessary.
2006.0 Fiesta 1212006 Gl49885en
Front or rear suspension
damage. INSTALL new
suspension
components as necessary.
procarmanuals.com