FORD FLEX 2013 1.G Owners Manual

FORD FLEX 2013 1.G Owners Manual FLEX 2013 1.G FORD FORD https://www.carmanualsonline.info/img/11/5112/w960_5112-0.png FORD FLEX 2013 1.G Owners Manual
Trending: tow, maintenance reset, inflation pressure, flat tire, brake pads, tires, brake rotor

Page 181 of 558

FORD FLEX 2013 1.G Owners Manual Unstowing the third row seat
Note:Ensure that there are no objects such as books, purses or brief
cases on the load floor before unstowing the seat. Failure to remove all
objects from the top of the l

Page 182 of 558

FORD FLEX 2013 1.G Owners Manual PowerFold3rd-row seat (if equipped)
The third row seat features a power one-touch operation that allows you
to adjust the Left, Right, or Both seats into a NORMAL, STOW, FOLD, or
TAILGATE position wi

Page 183 of 558

FORD FLEX 2013 1.G Owners Manual Note:Ensure that there are no objects such as books, purses or brief
cases on the load floor before unstowing the seat. Failure to remove all
objects from the top of the load floor prior to unstowing

Page 184 of 558

FORD FLEX 2013 1.G Owners Manual HOMELINKWIRELESS CONTROL SYSTEM (IF EQUIPPED)
WARNING:Make sure that the garage door and security device
are free from obstruction when you are programming. Do not
program the system with the vehicle

Page 185 of 558

FORD FLEX 2013 1.G Owners Manual 1. Switch the ignition on.
2. Hold the garage door hand-held
transmitter 1–3 in. (2–8 cm) away
from the button you want to
program.
Note:During programming, the
hand-held transmitter may stop
tran

Page 186 of 558

FORD FLEX 2013 1.G Owners Manual Erasing the Function Button Codes
Note:You can not erase individual
buttons.
1. Press and hold the outer two
function buttons simultaneously for
approximately 20 seconds until the
indicator lights abo

Page 187 of 558

FORD FLEX 2013 1.G Owners Manual 2. Press the same button twice to confirm the change to Programming
mode. If done properly the LED light will appear red.
3. Hold the transmitter within 1–3 inches (2–8 cm) of the HomeLinkbutton.

Page 188 of 558

FORD FLEX 2013 1.G Owners Manual Clearing a HomeLinkdevice
To erase programming from the three HomeLinkbuttons press and hold
the two outer HomeLinkbuttons until the indicator light begins to flash.
The led will begin flashing in

Page 189 of 558

FORD FLEX 2013 1.G Owners Manual AUXILIARY POWER POINTS
WARNING:Do not plug optional electrical accessories into the
cigarette lighter socket (if equipped). Improper use of the lighter
can cause damage not covered by your warranty, a

Page 190 of 558

FORD FLEX 2013 1.G Owners Manual Power Point (110V AC) (if equipped)
WARNING:Do not keep electrical devices plugged in the
powerpoint whenever the device is not in use. Do not use any
extension cord with the 110V AC power point, sinc
Trending: fuse, maintenance schedule, clutch, overheating, Power locks, child lock, fuel type