heating FORD FOCUS 2012 3.G User Guide
[x] Cancel search | Manufacturer: FORD, Model Year: 2012, Model line: FOCUS, Model: FORD FOCUS 2012 3.GPages: 406, PDF Size: 2.68 MB
Page 347 of 406

•DO NOT MIXdifferent colors or types of coolant in your vehicle.
Make sure the correct coolant is used.DO NOT MIXrecycled coolant
and new (unused) coolant together in the vehicle. Mixing of engine
coolants may harm your engine’s cooling system. The use of an
improper coolant may harm engine and cooling system components
and may void the warranty. Refer toMaintenance product
specifications and capacitiesin this chapter.
Note:Do not use stop leak pellets or cooling system sealants/additives
as they can cause damage to the engine cooling and/or heating systems.
This damage would not be covered under your vehicle’s warranty.
•A large amount of water without engine coolant may be added, in case
of emergency, to reach a vehicle service location. In this instance, the
cooling system must be drained and refilled with a 50/50 mixture of
engine coolant and distilled water as soon as possible. Water alone
(without engine coolant) can cause engine damage from corrosion,
overheating or freezing.
•Do not use alcohol, methanol, brine or any engine coolants
mixed with alcohol or methanol antifreeze (coolant).Alcohol
and other liquids can cause engine damage from overheating or
freezing.
•Do not add extra inhibitors or additives to the coolant.These
can be harmful and compromise the corrosion protection of the engine
coolant.
For vehicles with overflow coolant systems with a non-pressurized cap
on the coolant recovery system, add coolant to the coolant recovery
reservoir when the engine is cool. Add the proper mixture of coolant and
distilled water to the FULL COLD level. For all other vehicles which have
a coolant degas system with a pressurized cap, or if it is necessary to
remove the coolant pressure relief cap on the radiator of a vehicle with
an overflow system, follow these steps to add engine coolant.
WARNING:To reduce the risk of personal injury, make sure the
engine is cool before unscrewing the coolant pressure relief cap.
The cooling system is under pressure; steam and hot liquid can come
out forcefully when the cap is loosened slightly.
Add the proper mixture of coolant and water to the cooling system by
following these steps:
1. Before you begin, turn the engine off and let it cool.
2. When the engine is cool, wrap a thick cloth around the coolant
pressure relief cap on the coolant reservoir (a translucent plastic bottle).
Slowly turn cap counterclockwise (left) until pressure begins to release.
Maintenance and Specifications
347
2012 Focus(foc)
Owners Guide, 1st Printing
USA(fus)
Page 348 of 406

3. Step back while the pressure releases.
4. When you are sure that all the pressure has been released, use the
cloth to turn it counterclockwise and remove the cap.
5. Fill the coolant reservoir slowly with the proper coolant mixture, to
within the COLD FILL RANGE or the FULL COLD level on the reservoir.
If you removed the radiator cap in an overflow system, fill the radiator
until the coolant is visible and radiator is almost full.
6. Replace the cap. Turn until tightly installed. Cap must be tightly
installed to prevent coolant loss.
After any coolant has been added, check the coolant concentration (refer
toChecking engine coolant). If the concentration is not 50/50, drain
some coolant and adjust the concentration. It may take several drains
and additions to obtain a 50/50 coolant concentration.
Whenever coolant has been added, the coolant level in the coolant
reservoir should be checked the next few times you drive the vehicle. If
necessary, add enough 50/50 concentration of engine coolant and
distilled water to bring the liquid level to the proper level.
If you have to add more than 1.0 quart (1.0 liter) of engine coolant per
month, have your authorized dealer check the engine cooling system.
Your cooling system may have a leak. Operating an engine with a low
level of coolant can result in engine overheating and possible engine
damage.
Recycled engine coolant
Ford Motor Company does NOT recommend the use of recycled engine
coolant since a Ford-approved recycling process is not yet available.
Used engine coolant should be disposed of in an appropriate
manner. Follow your community’s regulations and standards for recycling
and disposing of automotive fluids.
Coolant refill capacity
To find out how much fluid your vehicle’s cooling system can hold, refer
toMaintenance product specifications and capacitiesin this chapter.
Fill your engine coolant reservoir as outlined previously in theAdding
engine coolantsection.
Maintenance and Specifications
348
2012 Focus(foc)
Owners Guide, 1st Printing
USA(fus)
Page 349 of 406

Severe climates
If you drive in extremely cold climates:
•It may be necessary to increase the coolant concentration
above 50%.
•NEVER increase the coolant concentration above 60%.
•A coolant concentration of 60% will provide improved freeze
point protection. Increased engine coolant concentrations
above 60% will decrease the overheat protection
characteristics of the engine coolant and may cause engine
damage.
•If available, refer to the chart on the coolant container to
ensure the coolant concentration in your vehicle will provide
adequate freeze protection at the temperatures in which you
drive in the winter months.
If you drive in extremely hot climates:
•It is still necessary to maintain the coolant concentration
above 40%.
•NEVER decrease the coolant concentration below 40%.
•Decreased engine coolant concentrations below 40% will
decrease the corrosion/freeze protection characteristics of the
engine coolant and may cause engine damage.
•If available, refer to the chart on the coolant container to
ensure the coolant concentration in your vehicle will provide
adequate protection at the temperatures in which you drive.
Vehicles driven year-round in non-extreme climates should use a 50/50
mixture of engine coolant and distilled water for optimum cooling system
and engine protection.
Powertrain limiting and protection
The engine control module (ECU) is equipped with a feature called
powertrain limiting and protection (PTLP). PTLP will help protect the
engine from damage in case the engine is overheating (coolant and/or oil
temperature too hot). PTLP will automatically intervene during normal
engine operation should it determine the engine coolant and/or oil
temperatures are too hot. It does this by gradually reducing the
maximum allowable engine rpm until the engine has cooled sufficiently.
PTLP will automatically reinstate normal engine operation if it
determines the engine temperatures have cooled sufficiently.
Maintenance and Specifications
349
2012 Focus(foc)
Owners Guide, 1st Printing
USA(fus)
Page 350 of 406

During an engine overheating condition, the instrument cluster will
display a message and a chime will sound. The engine may also have
temporarily reduced power and reduced rpm limit during an overheating
condition.
Operating the engine with high engine coolant temperature (coolant
gauge indicator is red) may cause powertrain damage. Stop the vehicle
as soon as safely possible, and let the engine cool off while idling.Note:
Driving the vehicle without repairing the engine problem increases the
chance of engine damage. Take your vehicle to an authorized dealer as
soon as possible.
FUEL FILTER
Your vehicle is equipped with a lifetime fuel filter that is integrated with
the fuel tank. Regular maintenance or replacement is not needed.
WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS
Important safety precautions
WARNING:Do not overfill the fuel tank. The pressure in an
overfilled tank may cause leakage and lead to fuel spray and fire.
WARNING:The fuel system may be under pressure. If you hear
a hissing sound near the fuel filler door (Easy Fuel“no cap”
fuel system), do not refuel until the sound stops. Otherwise, fuel may
spray out, which could cause serious personal injury.
WARNING:Automotive fuels can cause serious injury or death
if misused or mishandled.
WARNING:Fuel ethanol and gasoline may contain benzene,
which is a cancer-causing agent.
Maintenance and Specifications
350
2012 Focus(foc)
Owners Guide, 1st Printing
USA(fus)
Page 383 of 406

components affecting emission control must be equivalent to genuine
Ford Motor Company parts in performance and durability. It is the
owner’s responsibility to determine the equivalency of such parts. Please
consult yourWarranty Guidefor complete warranty information.
Chemicals or additives not approved by Ford are not required for factory
recommended maintenance. In fact, Ford Motor Company recommends
against the use of such additive products unless specifically
recommended by Ford for a particular application.
Oils, fluids and flushing
In many cases, fluid discoloration is a normal operating characteristic
and, by itself, does not necessarily indicate a concern or that the fluid
needs to be changed. However, discolored fluids that also show signs of
overheating and/or foreign material contamination should be inspected
immediately by a qualified expert such as the factory-trained technicians
at your dealership. Your vehicle’s oils and fluids should be changed at the
specified intervals or in conjunction with a repair. Flushing is a viable
way to change fluid for many vehicle sub-systems during scheduled
maintenance. It is critical that systems are flushed only with new fluid
that is the same as that required to fill and operate the system, or using
a Ford-approved flushing chemical.
Genuine Ford parts and service
When planning your maintenance services, consider your dealership for
all your vehicle’s needs.
There are a lot of reasons why visiting your dealership for all your
service needs is a great way to help keep your vehicle running great.
Convenience
Many dealerships have extended evening and Saturday hours to make
your service visit more convenient. How’s that for quality service?
Factory-trained technicians
Service technicians participate in extensive factory-sponsored
certification training to help them become experts on the operation of
your vehicle. Ask your dealership about the training and certification
their technicians have received.
Genuine Ford and Motorcraftreplacement parts
Dealerships stock Ford and Motorcraftbranded replacement parts.
These parts meet or exceed Ford Motor Company’s specifications, and
we stand behind them. Parts installed at your dealership carry a
Scheduled Maintenance
383
2012 Focus(foc)
Owners Guide, 1st Printing
USA(fus)
Page 400 of 406

911 Assist™ ................................83
A
Accessing call history/phone
book during active call ...............68
Accessing your media menu
features ........................................93
Accessing your phone menu
features ........................................71
Accessory delay ........................139
Active call menu options ...........68
Active Park Assist .....................289
Advanced menu options .......79, 98
Advanced menu options
(prompts, languages, defaults,
master reset, installing
applications) ................................79
AdvanceTrac ..............................268
Airbag supplemental restraint
system ........................195, 204, 206
and child safety seats ............197
description ..............195, 204, 206
disposal ....................................209
driver airbag ............197, 205, 207
indicator light .................203, 209
operation .................197, 205, 207
passenger airbag .....197, 205, 207
side airbag ...............................204
Air cleaner filter ...............365, 368
Air conditioning ................115, 118
manual heating and air
conditioning system ...............115
Ambient mood/lighting .............128
Antifreeze
(see Engine coolant) ................345Anti-lock brake system
(see Brakes) ..............................266
Anti-theft system ..............168, 171
arming the system ..........169, 171
disarming a triggered
system .....................................172
triggering .................................172
Audio system
(see Radio) ......................37, 40, 45
Automatic transmission ............274
driving an automatic
overdrive .................................274
fluid, adding ............................364
fluid, checking ........................364
fluid, refill capacities ..............369
fluid, specification ..................369
Selectshift (SST) ....................276
Auxiliary input jack (Line in) ....50
Auxiliary power point ...............136
Axle
refill capacities ........................369
B
Battery .......................................343
acid, treating emergencies .....343
jumping a disabled battery ....314
maintenance-free ....................343
replacement, specifications ...368
servicing ..................................343
Belt-Minder.............................191
Blind spot mirror ......................293
Booster seats .............................224
Brakes ........................................266
anti-lock ...................................266
anti-lock brake system (ABS)
warning light ...........................267
fluid, checking and adding ....364
fluid, refill capacities ..............369
Index
400
2012 Focus(foc)
Owners Guide, 1st Printing
USA(fus)
Page 401 of 406

fluid, specifications .................369
lubricant specifications ..........369
parking ....................................268
shift interlock ..........................272
Break-in period .............................5
Bulbs ..........................................128
C
Capacities for refilling fluids ....369
Cell phone use ..............................8
Changing a tire .........................308
Child safety seats ......................214
attaching with tether straps ..220
in front seat ............................214
in rear seat ..............................214
LATCH .....................................218
recommendations ...................212
Child safety seats - booster
seats ...........................................224
Cleaning your vehicle
engine compartment ..............329
instrument panel ....................331
interior .....................................332
plastic parts ............................330
washing ....................................328
waxing .....................................328
wheels ......................................329
wiper blades ............................331
Climate control (see Air
conditioning or Heating) ..115, 118
Clock ..........................37, 40, 42, 45
Clutch
fluid ..........................................364
operation while driving ..........278
recommended shift speeds ....279
Connecting a digital media
player to SYNC.........................88Console ......................................136
Controls
steering column ......................143
Coolant
checking and adding ..............345
refill capacities ................348, 369
specifications ..........................369
Cruise control
(see Speed control) ..................141
Customer Assistance ................296
Ford Extended Service
Plan ..................................378, 381
Getting assistance outside the
U.S. and Canada .....................325
Getting roadside assistance ...296
Getting the service you
need .........................................320
Ordering additional owner’s
literature .................................326
Utilizing the
Mediation/Arbitration
Program ...................................324
D
Daytime running lamps
(see Lamps) ..............................123
Dipstick
automatic transmission
fluid ..........................................364
engine oil .................................340
Doors
central unlocking ....................158
Driving under special
conditions ..................................278
through water .........................295
E
Electronic message center ...18, 21
Index
401
2012 Focus(foc)
Owners Guide, 1st Printing
USA(fus)
Page 402 of 406

Emergencies, roadside
jump-starting ..........................314
running out of fuel .................356
Emission control system ..........361
End user license agreement ....107
Engine ................................372–373
cleaning ...................................329
coolant .....................................345
idle speed control ...................343
lubrication specifications .......369
refill capacities ........................369
service points ..................337–338
Engine block heater .................264
Engine fan .................................337
Engine oil ..................................340
checking and adding ..............340
dipstick ....................................340
filter, specifications ........342, 368
recommendations ...................342
refill capacities ........................369
specifications ..........................369
Event data recording ....................7
Exhaust fumes ..........................264
F
Fan, Engine Cooling .........335, 337
Fleet MyKey programming ......152
Flexible Fuel Vehicle (FFV) ....350
Floor mats .........................150–151
Fluid capacities .........................369
Fog lamps ..................................123
Fuel ............................................350
calculating fuel economy .......358
cap ...........................................353
capacity ...................................369
choosing the right fuel ...........354detergent in fuel .....................356
filler funnel .............................356
filling your vehicle with
fuel ...........................350, 353, 358
filter, specifications ........350, 368
fuel pump shut-off ..................297
improving fuel economy ........358
octane rating ...........355, 372–373
quality ......................................356
running out of fuel .................356
safety information relating to
automotive fuels .....................350
Fuel - flex fuel vehicle
(FFV) .........................350, 354–355
Fuses ..................................298–299
G
Garage door opener ..................146
Gas cap (see Fuel cap) ............353
Gas mileage (see Fuel
economy) ...................................358
Gauges .........................................17
H
Hazard flashers .........................297
Headlamps .................................122
aiming ......................................125
autolamp system .....................122
bulb specifications ..................129
daytime running lights ...........123
flash to pass ............................123
high beam ...............................123
replacing bulbs .......................130
turning on and off ..................122
Head restraints .........................173
Heating
heating and air conditioning
system .............................115, 118
Index
402
2012 Focus(foc)
Owners Guide, 1st Printing
USA(fus)