wheel torque FORD FOCUS 2014 3.G Owners Manual

Wheels and Tires 263
Tire care...........................................263
Tire Pressure Monitoring System (TPMS)...................279
Changing a road wheel.................................283
Technical specifications.................................288
Wheel lug nut torque..................................288
Capacities and Specifications 289
Engine drivebelt......................................289
Maintenance product specifications and capacities.............290
Part numbers........................................293
Vehicle identification number............................294
Vehicle certification label...............................295
Transmission code designation............................295
Accessories 296
Accessories.........................................296
Ford Extended Service Plan 298
Audio System 301
AM/FMstereo........................................303
AM/FM/CD with SYNC.................................305
AM/FMstereowithsingleCD ............................309
Satellite radio information...............................317
Auxiliary input jack...................................320
USBport...........................................321
SYNC® 323
Pairing your phone for the first time.......................328
911 Assist™.........................................344
Vehicle Health Report..................................346
Table of Contents7
2014 Focus(foc)
Owners Guide gf, 1st Printing, October 2012
USA(fus)

7. Loosen each wheel lug nut one-half turn counterclockwise but do not
remove them until the wheel is raised off the ground.
8. The vehicle jacking points are
shown here, and are depicted on the
yellow warning label on the jack.
Note:Jack at the specified locations
to avoid damage to the vehicle.
9. Remove the lug nuts with the lug wrench.
10. Replace the flat tire with the spare tire, making sure the valve stem
is facing outward. Reinstall the lug nuts until the wheel is snug against
the hub. Do not fully tighten the lug nuts until the wheel has been
lowered.
11. Lower the wheel by turning the jack handle counterclockwise.
12. Remove the jack and fully tighten the
lug nuts in the order shown. SeeWheel Lug
Nut Torque Specificationsin this chapter
for the proper lug nut torque specification.
13. Put the flat tire, jack and lug wrench
away. Make sure the jack is fastened so it
does not rattle when you drive. Unblock the
wheels.
Wheels and Tires287
2014 Focus(foc)
Owners Guide gf, 1st Printing, October 2012
USA(fus)

TECHNICAL SPECIFICATIONS
Wheel Lug Nut Torque Specifications
WARNING:When a wheel is installed, always remove any
corrosion, dirt or foreign materials present on the mounting
surfaces of the wheel or the surface of the wheel hub, brake drum or
brake disc that contacts the wheel. Make sure that any fasteners that
attach the rotor to the hub are secured so they do not interfere with
the mounting surfaces of the wheel. Installing wheels without correct
metal-to-metal contact at the wheel mounting surfaces can cause the
wheel nuts to loosen and the wheel to come off while the vehicle is in
motion, resulting in loss of control.
Retighten the lug nuts to the specified torque within 100 miles
(160 kilometers) after any wheel disturbance (such as tire rotation,
changing a flat tire, wheel removal).
Bolt size Wheel lug nut torque*
ft-lb N•m
M12 x 1.5 100 135
* Torque specifications are for nut and bolt threads free of dirt and
rust. Use only Ford recommended replacement fasteners.
Note:Inspect the wheel pilot bore
and mounting surface prior to
installation. Remove any visible
corrosion or loose particles.
288Wheels and Tires
2014 Focus(foc)
Owners Guide gf, 1st Printing, October 2012
USA(fus)