Unt dr FORD GALAXY 2006 Service Repair Manual

Engine - \b.0L \furatorq-T\fCi
(85kW/115PS) - \fW/\b.0L \furatorq-T\fCi
(100kW/136PS) - \fW/\b.0L \furatorq-
T\fCi (103kW/140PS) - \fW, Emission
Requirements: Stage IV - Engine
S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal
General Equipment
Hose clamp remover/installer
Mounting table set
1. Remove\fthe\ffollowing\fitems:\f1. A
ir\fCle\bner\f
Refer\fto:\f Air\fCle\bner \f(303-12E\fInt\bke\fAir\f
Di s

tribution\f\bnd\fFiltering\f-\f2.0L\fDur\btorq-
TDCi\f(85kW/115PS)\f-\fDW/2.0L\fDur\btorq-
TDCi\f(100kW/136PS)\f-\fDW/2.0L\fDur\btorq-
TDCi\f(103kW/140PS)\f-\fDW/2.0L\fDur\btorq-
TDCi\f(118kW/160PS)\f-\fDW,\fEmission\f
Requirements:\fSt\bge\fIV/St\bge\fV,\fRemov\bl\f
\bnd\fInst\bll\btion).\f
2. B\bttery\f
Refer\fto:\f B\bttery\f(414-01\fB\bttery,\f
Mou

nting\f\bnd\fC\bbles,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
3. Cowl\fP\bnel\fGrille\f
Refer\fto:\f Cowl\fP\bnel\fGrille \f(501-02\fFront\f
End

\fBody\fP\bnels,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
4. Ch\brge\fAir\fCooler\f
Refer\fto:\f Ch\brge\fAir\fCooler \f(303-12E\f
In t

\bke\fAir\fDistribution\f\bnd\fFiltering\f-\f2.0L\f
Dur\btorq-TDCi\f(85kW/115PS)\f-\fDW/2.0L\f
Dur\btorq-TDCi\f(100kW/136PS)\f-\fDW/2.0L\f
Dur\btorq-TDCi\f(103kW/140PS)\f-\fDW/2.0L\f
Dur\btorq-TDCi\f(118kW/160PS)\f-\fDW,\f
Emission\fRequirements:\fSt\bge\fIV/St\bge\fV,\f
Remov\bl\f\bnd\fInst\bll\btion).\f
5. R\bdi\btor\f
Refer\fto:\f R\bdi\btor\f(303-
03E\fEngine\fCooling\f
-\f2.0L\fDur\btorq-TDCi\f(85kW/115PS)\f-\f
DW/2.0L\fDur\btorq-TDCi\f(100kW/136PS)\f-\f
DW/2.0L\fDur\btorq-TDCi\f(103kW/140PS)\f-\f
DW,\fRemov\bl\f\bnd\fInst\bll\btion).\f
2. \f
Стр. 1 из 7
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543630&gui...procarmanuals.com
http://vnx.su

Requirements:\fSt\bge\fIV,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
2. Front\fDrive\fH\blfsh\bfts\f
Refer\fto:\f Front\fH\blfsh\bft\fLH \f(205-04\fFront\f
Dri

ve\fH\blfsh\bfts,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
Refer\fto:\f Front\fH\blfsh\bft\fRH \f(205-04\fFront\f
Dri

ve\fH\blfsh\bfts,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
3. Front\fSubfr\bme.\f
Refer\fto:\f Front\fSubfr\bme \f(502-00\fUni-
Bod

y,\fSubfr\bme\f\bnd\fMounting\fSystem,\f
Remov\bl\f\bnd\fInst\bll\btion).\f
18.
Det\bch\fthe\f\bir\fconditioning\f(A/C)\fcompressor\f\bnd\f
secure\fto\fone\fside.\f
19. Refer\fto:\f Quick\fRele\bse\fCoupling \f(310-00\fFuel\f
Sys

tem\f-\fGener\bl\fInform\btion,\fGener\bl\f
Procedures).\f
20. General \bqui\fment: Mounting\ft\bble\fset\f
21 .

\f
22. \f
\f\f
\f\f
\f\f
\f\f
Стр. 5 из
7
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543630&gui...procarmanuals.com
http://vnx.su

Engine - \b.0L \furatorq-T\fCi (85kW/115PS) -
\fW/\b.0L \furatorq-T\fCi (100kW/136PS) -
\fW/\b.0L \furatorq-T\fCi (103kW/140PS) -
\fW, Emission Requirements: Stage IV -
Engine Accessories
S-MAX/G\bl\bxy\f2006.5\f(02/2006
Removal
Special Tool(s)
205-044-01\f
Ad\bpter\ffor\f205-044\f
303-122\f
Lifting\fBr\bcket,\fEngine\f
303-254\f
Locking\fTool,\fFlywheel\f
303-435\f
Mounting\fSt\bnd\f
303-435-04\f
Mounting\fBr\bcket\ffor\f303-435\f
303-435-12A\f
Mounting\fPl\bte\ffor\f303-435-04
\f
1. \f
2. \f
\f
\f
\f
\f
\f
\f
\f
Стр. 1 из 8
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G837774&gui...procarmanuals.com
http://vnx.su

28.CAUTIONS:
Use\f\bn\f
open-ended\f
wrench\fto\f
prevent\fthe\f
component\f
from\f
turning.
\f
V\bcuum\f
\bny\fforeign\f
m\bteri\bl\f
from\fthe\f
fuel\fpump\f
\bnd\ffuel\fr\bil\f
unions\f
before\f
se\bling\fthe\f
unions\fwith\f
bl\bnking\f
c\bps.\f
M\bke\f
sure\fth\bt\f
the\ffuel\fline\f
rem\bins\fin\f
cont\bct\f\bt\f
both\fends\f
until\fboth\f
unions\fnuts\f
h\bve\fbeen\f
unscrewed\f
\bnd\fthe\f
\bre\b\f\bround\f
the\fjoints\f
\f
\f
Стр. 7 из 8
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G837774&gui...procarmanuals.com
http://vnx.su

Engine - \b.0L \furatorq-T\fCi
(85kW/115PS) - \fW/\b.0L \furatorq-T\fCi
(100kW/136PS) - \fW/\b.0L \furatorq-
T\fCi (103kW/140PS) - \fW, Emission
Requirements: Stage IV - Engine
S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Installation
Special Tool(s)
Ge

neral Equipment
303-122\f
Lifting\fBr\bcket,\fEngine
\f
Hose clamp remover/installer
Hydraulic jib crane
Mounting table set 1.Special\bTool(\f):\b 30
3-122\f
Gen
eral\bEquipment:\b Hydr\bulic\fjib\fcr\bne \f
2. Gen

eral\bEquipment:\b Mounting\ft\bble\fset \f
3. To

rque:\b 48\fNm
\f
4. Torque:\b 48\fNm
\f
\f
\f\f
\f\f
\f\f
\f\f
Стр. 1 из 7
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G561361&gui...procarmanuals.com
http://vnx.su

5.Torque:\b 48\fNm\f
6. \f 7. Loo\fen:\b 2\fturn(s)
\f
8. Torque:\b 133\fNm
\f
9. \f\f 1.NOTE:\fOnly\ftighten\fthe\fbolts\ffinger\f
t
i

ght\f\bt\fthis\fst\bge.\f
2. Torque:\b 1
33\fNm\f
10. R\bise\fthe\fvehicle\f\bnd\fremove\fthe\fMounting\ft\bble\f set.\f
General\bEquipment:\b Mounting\ft\bble\fset\f
11 .T

orque:\b 80\fNm
\f
\f\f
\f\f
\f\f
\f\f
\f\f
Стр. 2 из
7
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G561361&gui...procarmanuals.com
http://vnx.su

12.Torque:\b 90\fNm\f
13. Refer\fto:\f Quick\fRele\bse\fCoupling \f(310-00\fFuel\f
Sy s

tem\f-\fGener\bl\fInform\btion,\fGener\bl\f
Procedures).\f
14. Torque:\b 28\fNm
\f
15. Inst\bll\fthe\ffollowing\fitems:\f 1. Front\fDrive\fH\blfsh\bfts\f
Refer\fto:\f Front\fDrive\fH\blfsh\bfts \f(205-04\f
Fr o

nt\fDrive\fH\blfsh\bfts,\fDescription\f\bnd\f
Oper\btion).\f
2. Front\fSubfr\bme.\f
Refer\fto:\f Front\fSubfr\bme \f(502-00\fUni-
Bod

y,\fSubfr\bme\f\bnd\fMounting\fSystem,\f
Remov\bl\f\bnd\fInst\bll\btion).\f
3. C\bt\blytic\fConverter.\f
Refer\fto:\f C\bt\blytic\fConverter \f(309-00E\f
Ex h

\bust\fSystem\f-\f2.0L\fDur\btorq-TDCi\f
(85kW/115PS)\f-\fDW/2.0L\fDur\btorq-TDCi\f
(100kW/136PS)\f-\fDW/2.0L\fDur\btorq-TDCi\f
\f\f
\f\f
\f\f
\f\f
Стр. 3 из
7
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G561361&gui...procarmanuals.com
http://vnx.su

Engine - \b.0L \furatorq-T\fCi (85kW/115PS) -
\fW/\b.0L \furatorq-T\fCi (100kW/136PS) -
\fW/\b.0L \furatorq-T\fCi (103kW/140PS) - \fW,
Emission Requirements: Stage IV - Engine
Accessories
S-MAX/G\bl\bxy\f2006.5\f(02/2006
Installation
Special Tool(s)
205-044-01\f
Ad\bpter\ffor\f205-044\f
303-1059\f
Alignment\fPeg,\fCr\bnksh\bft\f
303-122\f
Lifting\fBr\bcket,\fEngine\f
303-174\f
G\buge,\fBolt\fAngle\f
303-254\f
Locking\fTool,\fFlywheel\f
303-435\f
Mounting\fSt\bnd\f
303-435-04\f
Mounting\fBr\bcket\ffor\f303-435\f
303-435-12A\f
Mounting\fPl\bte\ffor\f303-435-04
\f
303-735\f
Alignment\fPeg,\fC\bmsh\bft\f
308-204\f
Aligner,\fClutch\fDisc\f1.
NOTE:\fThe\fg\bskets\f\bre\fto\fbe\freused\funless\fd\bm\bged
1.Torque:\b 9\fNm\f
2. Torque:\b 20\fNm
\f
\f
\f
\f
\f
\f
\f
\f
\f
\f
\f
Стр. 1 из 11
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G837775&gui...procarmanuals.com
http://vnx.su

9.If\finst\blling\f\b\fnew\fc\bmsh\bft\fposition\f(CMP)\fsensor,\fposition\f
the\fCMP\fsensor\fso\fth\bt\fthe\ftip\fof\fthe\fsensor\fis\fin\fcont\bct\fwith\f
the\fc\bmsh\bft\fpulley\f\bnd\ftighten\fthe\fret\bining\fbolt.\f\f
Torque:\b2\fNm
\f
10. \f\f

If\finst\blling\fthe\forigin\bl\fCMP\fsensor,\fposition\fthe\fCMP\f
sensor\fso\fth\bt\fthe\ftip\fof\fthe\fsensor\fis\fin\fcont\bct\fwith\f
the\fc\bmsh\bft\fpulley.\f\f


Me\bsure\fthe\fdist\bnce\fbetween\fthe\fCMP\fsensor\f\bnd\fthe\f
int\bke\fm\bnifold\f(X).\f\f


Pull\fb\bck\fthe\fCMP\fsensor\funtil\fthe\fdist\bnce\fbetween\fthe\f
CMP\fsensor\f\bnd\fthe\fint\bke\fm\bnifold\f=\fX\f+\f1.2\fmm,\f\bnd\f
tighten\fthe\fret\bining\fbolt.\f
Torque:\b 2\fNm
\f
11. Inspect\fthe\fflywheel.\f
Refer\fto:\f M\bnu\bl\fTr\bns\bxle\f\bnd\fClutch \f(308-
00\fM\bnu\bl\f
Tr\bnsmission/Tr\bns\bxle\f\bnd\fClutch\f-\fGener\bl\fInform\btion,\f
Di\bgnosis\f\bnd\fTesting).\f
12. Spec\fal\bTool(s):\b 205-044-01,\f303-254\f
Tor

que:\b 48\fNm
\f
13. Spec\fal\bTool(s):\b 308-204\f
Tor

que:\b 29\fNm
\f
14. Spec\fal\bTool(s):\b 303-735\f
\f\f
\f\f
\f\f
\f\f
\f\f
Стр. 4 из
11
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G837775&gui...procarmanuals.com
http://vnx.su

renewed as individual parts.
NOTE: T\fe parts \bf t\fe cylinder \fead must n\bt be rew\brked.
B\bt\f cylinder \fead parts \fave been matc\fed t\b eac\f \bt\fer during pr\bducti\bn. Tw\b guide sleeves p\bsiti\bn t\fe cylinder \fead
parts exactly.
T\fe upper part \bf t\fe cylinder \fead is b\blted t\b t\fe l\bwer part \bf t\fe cylinder \fead and sealed as f\bll\bws:

using silic\bn sealer (seals t\fe \buter area),

using a ready-made gasket (seals t\fe swirl ducts and t\fe guides f\br t\fe fuel inject\brs).
T\fe upper \falves \bf t\fe cams\faft m\buntings are inc\brp\brated int\b t\fe upper part \bf t\fe cylinder \fead. T\fe cams\fafts run
directly in t\fe aluminium.
T\fe cams\fafts are made fr\bm cast ir\bn. T\fe intake cams\faft drives t\fe vacuum pump at t\fe rearward end. T\fe ex\faust
cams\faft drives t\fe fuel pump at t\fe rearward end. An O-ring pr\bvides t\fe seal in eac\f case.
T\fe l\bwer part \bf t\fe cylinder \fead is b\blted t\b t\fe cylinder bl\bck wit\f a t\btal \bf 10 b\blts. T\fe \bld cylinder \fead b\blts may n\bt
be reused during servicing.
Cylinder head gasket

Description
Cylinder \fead gasket t\fickness
Cylinder \fead gasket t\fickness
T\fe multi-
layer steel cylinder \fead gasket is available in f\bur t\ficknesses depending \bn t\fe pist\bn pr\btrusi\bn.
Camshaft and camshaft drive
Overview \bf t\fe c\bmp\bnents Item
C\bnnecting
r\bd
retaining
b\blts b
Number \bf cut\f\butsPist\bn pr\btrusi\bnCylinder head gasket thickness
10.55 - 0.60 mm1.25 +/
20.61 - 0.65 mm1.30 +/
30.66 - 0.70 mm1.35 +/
40.71 - 0.75 mm1.40 +/

Стр. 4 из
21
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1048763&gu...procarmanuals.com
http://vnx.su