lock FORD MUSTANG 2001 4.G SVT Supplement Manual

SVT COBRA SPECIFIC FEATURES
²4.6L DOHC 32V V±8 Engine Ð 320 horsepower,
317 lb-ft torque
²Anti-lock Brake System with Traction Controly
²Limited-slip independent rear suspension
²Engine oil cooler
²Round fog lamps
²Sport seats
²Premium electronic AM/FM stereo/CD
²Dual illuminated visor mirrors
²Unique wheels and tires
SPORT INSTRUMENT CLUSTER
40
P! BRAKE
0
00000 00
EF
10 20406080
6010 014 0
180
220
260
100
120
140
1604
5
6
7
8 3
2
1
THEFT
RPMX1000
SELECT/RESET
LOW
FUELO/D
OFF AIR
BAGSERVICE
ENGINE
SOON
MPH km/h
ABS
.PREMIUM
UNLEADED FUEL ONLY
L
HL
HC
CHECK
FUEL
CAP
SVT Cobra specific features
5

Item Description
ConfigurationLongitudinally mounted,
90-degree V8, cast aluminum
cylinder block and cylinder
heads
Bore x Stroke90.2 x 90.0 mm
(3.55 x 3.54 in)
Displacement4601 cc/280 cid
Compression ratio9.85:1
Horsepower239 kW @ 6000 rpm
(320 HP @ 6000 rpm)
Torque430 Nm @ 4800 rpm
(317 lb.-ft. @ 4750 rpm)
Redline6800 rpm
(fuel shut-off at 7000 rpm)
Specific output66.269.6Hp per liter
ValvetrainDual overhead chain-driven
cams, roller finger followers
with hydraulic lash
adjustment, ovate-wire valve
springs, four valves per
cylinder
Fuel systemSequential electronic fuel
injection
Mass air sensor80 mm (3.15 in) diameter
Throttle bodyTwin 57 mm (2.24 in)
diameter bore-simultaneously
open
Exhaust manifoldsCast-high silicon,
molybdenum iron
Exhaust systemDual-stainless steel
Engine/Transmission
7

After any vehicle collision, the seat belt
system at all outboard seating positions
(except driver, which has no ªautomatic locking
retractorº feature) must be checked by a qualified
technician to verify that the ªautomatic locking
retractorº feature for child seats is still functioning
properly. In addition, all seat belts should be
checked for proper function.
BELT AND RETRACTOR ASSEMBLY MUST
BE REPLACED if the seat belt assembly
ªautomatic locking retractorº feature or any other
seat belt function is not operating properly when
checked according to the procedures in Workshop
Manual.
Failure to replace the Belt and Retractor
assembly could increase the risk of injury in
collisions.
Options, color and trim
13

Have your dealer check the engine cooling system
for leaks if you have to add more than 1.0 liter (1.0
quart) of engine coolant per month.
To avoid scalding hot steam or coolant from
being released from the engine cooling
system, never remove the pressure relief cap from
the engine coolant reservoir while the engine is
running or hot. Failure to follow this warning may
result in damage to the engine's cooling system
and possible severe personal injury.
If you must remove the pressure relief cap from the
engine coolant reservoir, follow these steps to avoid
personal injury:
1. Before you remove the cap, turn the engine off
and let it cool.
2. When the engine is cool, wrap a thick cloth
around the cap. Slowly turn cap counterclockwise
until pressure begins to release.
3. Step back while the pressure releases.
4. When you are sure that all the pressure has been
released, use the cloth to turn it counterclockwise
and remove the cap.
USING THE RIGHT BULBS
Function Trade Number
Park lamp, turn lamp, side marker
(front)3156K
Maintenance
19