seats FORD MUSTANG 2001 4.G SVT Supplement Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 2001, Model line: MUSTANG, Model: FORD MUSTANG 2001 4.GPages: 20, PDF Size: 0.19 MB
Page 5 of 20
SVT COBRA SPECIFIC FEATURES
²4.6L DOHC 32V V±8 Engine Ð 320 horsepower,
317 lb-ft torque
²Anti-lock Brake System with Traction Controly
²Limited-slip independent rear suspension
²Engine oil cooler
²Round fog lamps
²Sport seats
²Premium electronic AM/FM stereo/CD
²Dual illuminated visor mirrors
²Unique wheels and tires
SPORT INSTRUMENT CLUSTER
40
P! BRAKE
0
00000 00
EF
10 20406080
6010 014 0
180
220
260
100
120
140
1604
5
6
7
8 3
2
1
THEFT
RPMX1000
SELECT/RESET
LOW
FUELO/D
OFF AIR
BAGSERVICE
ENGINE
SOON
MPH km/h
ABS
.PREMIUM
UNLEADED FUEL ONLY
L
HL
HC
CHECK
FUEL
CAP
SVT Cobra specific features
5
Page 12 of 20
4±WAY HEAD RESTRAINTS (IF EQUIPPED)
Your vehicle's seats may be equipped with four-way
adjustable head restraints. The purpose of these
head restraints is to help limit head motion in the
event of a rear collision. To properly adjust your
head restraints, lift the head restraint so that it is
located directly behind your head or as close to that
position as possible. Refer to the following to raise
and lower the head restraints.
The head restraints can
be moved in four
directions:
²up and down
²forward or backward
ENERGY MANAGEMENT FEATURE
²This vehicle has a seat belt system with an energy
management feature at the front outboard seating
positions to help further reduce the risk of injury
in the event of a head-on collision.
²This seat belt system has a retractor assembly
that is designed to pay out webbing in a
controlled manner. This feature is designed to
help reduce the belt force acting on the
occupant's chest.
Options, color and trim
12
Page 13 of 20
After any vehicle collision, the seat belt
system at all outboard seating positions
(except driver, which has no ªautomatic locking
retractorº feature) must be checked by a qualified
technician to verify that the ªautomatic locking
retractorº feature for child seats is still functioning
properly. In addition, all seat belts should be
checked for proper function.
BELT AND RETRACTOR ASSEMBLY MUST
BE REPLACED if the seat belt assembly
ªautomatic locking retractorº feature or any other
seat belt function is not operating properly when
checked according to the procedures in Workshop
Manual.
Failure to replace the Belt and Retractor
assembly could increase the risk of injury in
collisions.
Options, color and trim
13