FORD MUSTANG 2016 6.G Quick Reference Guide

United States
Ford Customer Relationship Center
1-800-392-3673 (FORD)
(TDD for the hearing impaired:
1-800-232-5952)
owner.ford.com
@FordService
Canada
Ford Customer Relationship Centre
1-800-565-3673 (FORD)
ford.ca
@FordServiceCA
owner.ford.com (U . S .) ford.ca (C a n a d a)
Learn more about your new vehicle
Scan the country-appropriate QR code with your smartphone
(make sure you have a scanner app installed) and you can access
even more information about your vehicle.
2016 QUICK REFERENCE GUIDE
WARNING: Driving while distracted can result in
loss of vehicle control, crash and injury. We
strongly recommend that you use extreme
caution when using any device that may take
your focus off the road. Your primary responsibility
is the safe operation of your vehicle. We
recommend against the use of any hand-held
device while driving and encourage the use of
voice-operated systems when possible. Make
sure you are aware of all applicable local laws
that may affect the use of electronic devices
while driving.
This Quick Reference Guide is not intended to
replace your vehicle Owner’s Manual which
contains more detailed information concerning
the features of your vehicle, as well as important
safety warnings designed to help reduce the risk
of injury to you and your passengers. Please read
your entire Owner’s Manual carefully as you
begin learning about your new vehicle and refer
to the appropriate chapters when questions
arise. All information contained in this Quick
Reference Guide was accurate at the time of
duplication. We reserve the right to change
features, operation and/or functionality of any
vehicle specification at any time. Your Ford dealer
is the best source for the most current
information. For detailed operating and safety
information, please consult your Owner’s Manual.
July 2015 | First Printing | Quick Reference Guide | Mustang | Litho in U.S.A. | GR3J 19G217 AA

Instrument Panel .................4–5
SYNC .................................... 6–7
SYNC 3 ................................. 8–10
Comfort ................................ 11
Convertible Top .................... 12–13
Convenience ......................... 1 4
Function ............................... 15–17
Essential Features ............... 18–19
COMMONLY USED SYNC® 3* COMMANDSTABLE OF CONTENTS
Press the voice button on the steering wheel and then say:
Basic Commands» Main menu
» Go back
» Cancel
» List of commands
» Next page
» Previous page
» HelpAudio » Audio list of commands
» AM <530-1710>
» FM <87.9-107.9>
» SiriusXM <0-233>
»
» Bluetooth audio
» USB
» CD
Apps» List mobile apps
» Find new apps
Navigation*
» Navigation list of commands
» Destination
» Find intersection>
» Show destination>
» Where am I?
» SiriusXM Traffic and Travel Link
- Show prices/5 day forecast>
- Help
Phone» Phone list of commands
» Pair phone
» Call at home/at work>
» Dial
» Listen to text message

» Reply to message
Climate*» Climate list of commands
» Climate set temperature
<# degrees>
Refer to your SYNC Supplement, visit the website or call the toll-free
number for more information.
For U.S. customers: Visit owner.ford.com or call 1-800-392-3673 (select
Option 1 or 2 for language, then Option 3).
For Canadian customers: Visit SyncMyRide.ca or call 1-800-565-3673
(select Option 1 or 2 for language, then Option 3).
*if equipped

3
Service Engine
Soon Light
Lights briefly when you switch
the ignition on. If it remains on
or is blinking after you start the
engine, the On-Board Diagnostics
(OBD-II) system has detected a
problem. Drive in a moderate
fashion (avoid heavy acceleration
and deceleration) and contact
an authorized dealer as soon
as possible.
4 Information Display
Provides information about
various systems on your vehicle.
Use the left-hand, 5-way controls
located on the steering wheel
to choose and confirm settings
and messages. Refer to the
Information Displays chapter
of your Owner’s Manual for
more information.
5
Steering Wheel
Media Controls
Press VOL+ or VOL– to increase or
decrease volume levels.
Press
or to access the previous
or next radio station, CD track or
preset satellite radio channel. Press
M repeatedly to access all
possible media sources.
Press
to access SYNC® voice
recognition*.
Press
to access SYNC phone
features or to answer a call.
Press
to end a call.
6 Push-button Switch
Allows you to start your vehicle

by pressing the START STOP
button while fully pressing down
on the brake pedal (with automatic
transmission) or the clutch
(with manual transmission). If
your vehicle has been idling for
an extended period of time, it
automatically shuts down. Before
the engine shuts down, a message
appears in the information
display, allowing the driver to
override the shutdown feature.
Press the button again to switch
the engine off.
Note: Your keyless remote must
be inside the vehicle to switch the
ignition on and start your vehicle.
The keyless warning alert sounds
the horn twice when you exit the
vehicle with the keyless remote
while your vehicle is running.
2
1
3
4
6
5
1 Cruise Control
To set a cruise control speed:
A. Press and release the ON button.
B. Drive to your desired speed, and then press and release
the SET+ button.
C. Take your foot off the accelerator pedal.
To change your set speed, press and release SET+ or SET–.
To cancel your set speed, press and release CNCL or tap the
brake pedal.
To resume a set speed, press and release RES.
To turn cruise control off, press and release OFF.
For information regarding adaptive cruise control*, see the
Cruise Control chapter in your Owner’s Manual.
2 Lighting Control
Switches off the headlamps.

Switches on the parking, instrument panel, license
plate and tail lamps.
Switches on the headlamps.
Autolamps* automatically switch the exterior lamps
on or off based on available daylight.

Switch the fog lamps* on or off by pressing
the control.
INSTRUMENT PANEL
4
5*if equipped*if equipped

SYNC is a hands-free, voice recognition system used for
entertainment, information and communication.
SYNC. Say the Word.
Before You Get Started
1. Set up your owner account by visiting
owner.ford.com (U.S.) or SyncMyRide.ca (Canada).
Register by following the on-screen instructions. After
registering you can see what complimentary services you
are eligible for.
2. SYNC uses a wireless connection called Bluetooth
®
to communicate with your phone. Switch Bluetooth mode
on in your phone’s menu options. This lets your phone
find SYNC. If you need more details on setting up your
phone to work with SYNC, visit owner.ford.com (U.S.)
or SyncMyRide.ca (Canada), or your phone
manufacturer’s website.
Pairing Your Phone with SYNC
In order to use many of the features of SYNC such as making
a phone call or receiving a text, you must first connect or pair
your phone with SYNC.
To pair your phone for the first time
1. Make sure your vehicle is in park (P) (automatic
transmission) or 1 (manual transmission), and you switch
on your ignition, radio and cell phone’s Bluetooth feature. 2.
Press the phone button
. When the display indicates no
phone is paired, select the option to add a phone.
3. When a message to begin pairing appears in the audio
display, search for SYNC on your phone to start the
pairing process.
4. Confirm that the six-digit PIN appearing on your phone
matches the six-digit PIN that displays on the SYNC screen.
The display indicates when the pairing is successful.
The system may prompt you to
» Set your phone as the primary or favorite (the primary
phone receives messages and voicemail).
» Download your phone book (required to use the full set of
voice commands).
» Switch on 911 Assist
®.
Tips
» Make sure you accept the request from SYNC to access
your phone.
» To pair subsequent phones, please refer to Pairing
Subsequent Phones in the SYNC chapter of your
Owner’s Manual.
» If you are experiencing pairing problems, try performing
a clean pairing by deleting your services from SYNC,
deleting the SYNC connection from your phone and then
repeating the Pairing Your Phone with SYNC process.
Why Do You Need a SYNC Owner Account?
A SYNC owner account lets you receive the latest software
updates and, if you have questions, free customer support.
Visit the website or call the toll-free number for more
information. See the inside front cover of this guide
for details.
Using Your Cell Phone with SYNC
Note: You must download your phone book to make phone
calls with voice commands by name.
Making a phone call
Use SYNC to make a phone call to anyone in your phone
book by pressing the voice button
. When prompted, say a
voice command.
For example, you could say “Call Jake Smith at home”. When
the system confirms the number, say “Dial” to initiate the call.
Note: You can also make phone calls by pressing the voice
button
and when prompted, give the voice command
“Dial”, then verbally say the phone number. Answering incoming calls
Whenever you have an incoming call, the name and number
of the person calling appears in the display. Press the phone
button
to answer an incoming call. You can hang up at any
time by pressing the button.
Using SYNC to Access Digital Media
Plug your USB media device, such as phones and MP3
players, into a USB port and then wait for the system to finish
indexing your music. When indexing is complete, you can use
SYNC to play all of your favorite music.
Using voice commands to play music
1. Plug your media player into your USB port.
2. Press the voice button
. When prompted, say “USB”,
then follow up by saying a voice command.
SYN C®
6
7

A Revolutionary Way to
Connect with Your Vehicle
Use the touchscreen to explore and interact
with your vehicle. The touchscreen works the
same way as traditional controls, knobs and
buttons do. Press the various icons on your
touchscreen to personalize the many features
and settings of your vehicle all in one place.
The system provides easy interaction with
your audio, multimedia, climate control,
navigation* and mobile apps.
General tips
» Press the home icon at any time to return
to your home screen.
» Press the desired icon on the sensitive
touchscreen accurately. If you’re wearing
gloves, make sure they’re optimized for
touchscreen use.
» Refer to your SYNC Supplement, visit
the website or call the toll-free number
for more information. See the inside
front cover of this guide for details.
» Pair your phone to SYNC.
To pair your phone
» Make sure you activate Bluetooth on
your device.
» Touch Add Phone on your touchscreen.

Phone
After pairing your phone, you can
access more phone-dependent features:
» Recent call lists.
» Contacts: All of your contacts from
your phone display alphabetically.
Sort and view your contacts by
selecting a specific letter.
» Phone settings: Pair another
phone, and set ring tones and alerts.
» Text messages: View all of your
recent text messages.
» Do not disturb: Send all calls to
your voicemail, and all ring tones
and alerts set to silent mode.
Refer to your SYNC Supplement for
complete details.
Navigation*
Press the navigation icon to set your
destination. Select one of two ways to
find your destination:
» Map mode shows advanced viewing
of 2-D city maps, 3-D landmarks and
3-D city models (when available).
SYN C® 3*
» Follow the on-screen instructions.
The system audibly prompts
you to search for SYNC on
your device.
» Select SYNC on your device.
» Confirm that the six-digit
PIN appearing on your device
matches the six-digit PIN that
displays on the SYNC 3 screen.
» The display indicates when the
pairing is successful.
SYNC prompts you to choose
your settings for certain features.
Your cell phone may also prompt
you to give SYNC permission to
access information.
» Destination mode lets you key in a
specific address or use a variety of
search methods to locate where you
want to go.
Refer to your SYNC Supplement for
complete details.
Set a Destination
1. Press Destination on your
touchscreen and then press Search.
2. Enter a street address, intersection,
city or a point of interest (POI).
3. After you choose your destination,
press Start. The system uses a
variety of screens and visible prompts
to guide you to your destination.
During your route, you can press the
maneuver arrow icon on the map if you
want the system to repeat the previous
route guidance instructions.
The navigation map shows your
estimated time of arrival, remaining
travel time and the distance to
your destination.
Navigation Menu
While you are on your route, you can
change your touchscreen view. To
change the view, touch Menu on the
bottom of the screen and then select Screen View to choose from any of the
following selections:

» Full Map
» Highway Exit Info displays on the
right side of the touchscreen. View
POI Icons (restaurants, ATMs, etc.)
as they pertain to each exit. You
can select a POI as a waypoint, if
you wish.
» Turn List displays SiriusXM Traffic
and Travel Link* information. If
traffic conditions change to cause
a major delay on the originally
selected route, then SYNC 3 provides
an automatic re-route.
Note: Minor traffic changes do not
prompt a re-route.
*if equipped98
*if equipped

Climate
SYNC 3 controls the temperature,
airflow direction, fan speed, and
activates other climate features, like
the heated steering wheel.* Use the
touchscreen to enter into each feature’s
submenu for additional options.
Set Your Temperature
» Touch the climate icon on your
touchscreen.
» Set your exact, desired temperature
using the
▲ or ▼ buttons.
Audio
No matter how you store your music,
SYNC makes it yours to enjoy when
you’re behind the wheel. Just press the
audio icon on the touchscreen. From
here, you can easily go between AM,
FM, Sirius, Bluetooth Stereo, Apps and
other media sources.
Set Your Radio Presets
» Touch the Audio icon > FM >
Direct Tune.
» Type in the frequency of your
desired station, and then select
Enter. You can also use the tune or
seek controls on the radio bezel or
the controls on the steering wheel
to select a station.
» Touch and hold one of the memory
preset buttons to save your station.
Bring in Your Own Music
Plug USB devices into your USB ports,
and use SYNC to play all of your favorite
music. After you plug your device into
a USB port, select Sources and then
choose USB. You can use the Shuffle
function to create random playlists.
Apps
Stream Apps
The system supports the use of
certain apps such as Pandora
® or
iHeartRadio® through a USB or
Bluetooth-enabled devices.
Each app gives you different on-screen
options depending on the app’s content.
Refer to your SYNC Supplement for
more information.
SYN C® 3* (CONTINUED)
Power Lumbar*
The power lumbar control is located on
the side of the driver seat.
Press one side of the control to increase
lower back firmness. Press the other
side of the control to decrease lower
back firmness.
Climate Controlled
Front Seats*
Touch the heated seat symbol
to cycle through the various heat
settings and off. More lights indicate
warmer settings.
Press the cooled seat symbol
to
cycle through the various cooling
settings and off. More lights indicate
cooler settings.
Dual-zone Automatic
Temperature Control*
To use, press the AUTO control and
then select the desired temperature by
using the control. Set an independent
temperature for the front-seat
passenger by using the passenger-side
rotary control.
Press and hold the AUTO control
to switch back to a single-zone
temperature control.
Rear Seat Access
Use the seatback release to fold the back
of the front seat forward. This release
handle is on the upper back of the front
seat. The seatback recline feature has
memory and locks automatically in the
original position.
Global Opening
You can use the remote control
to operate the windows with the
ignition off.
You can open the windows for a short
time after you unlock your vehicle
with the remote control. After you
unlock your vehicle, press and hold
the remote control unlock button to
open the windows. Release the button
once movement starts. Press the lock or
unlock button to stop movement.
Note: You can enable or disable this
feature in the information display, or
see an authorized dealer. To operate
this feature, you must deactivate the
accessory delay.
COMFORT
10
*if equipped
11
*if equipped

Closing the Convertible Top
1. Bring the vehicle to a complete stop and remove the
tonneau caps.
2. Press and hold the convertible top control as the top unfolds
and moves forward toward the windshield header.
3. When the top lines up evenly with the windshield header,
release the convertible top control.
4. Pull down on the latch handle and rotate it counterclockwise
to secure the convertible top.
5. After securing the convertible top fully, push the latch
handle up into the stowed position to lock the latch, and
then use the power window controls to close the windows.
Note: If the top has been open for an extended period of time
or if the temperature is low, the top material may shrink
slightly. If this happens, extra force on the latch handle may
be needed to secure the top.
For complete information, refer to the Convertible Top
chapter of your Owner’s Manual.
Tips When Using Your Convertible Top
» Do not store articles behind the rear seat. Articles stored
in the convertible top stowage compartment may break
the rear glass window when you open the top.
» The windows lower automatically when opening or
closing the top.
» Do not lower the top when the top material is wet. Remove
any leaves or debris on the outer surface of the top.
» The convertible top does not operate unless the vehicle is
stationary or traveling under 3 mph (4.8 km/h).
Note: You must switch your ignition on to open or close the
convertible top. We recommend that you leave the engine
running to prevent draining the battery.
CONVERTIBLE TOP* (CONTINUED)
Opening the Convertible Top
1. Bring the vehicle to a complete stop.
2. Move the latch handle, located above the interior mirror, down
toward the windshield and rotate the handle clockwise to release the
convertible top.
3. Press and hold the convertible top control, located on the overhead
console, until the windows are down completely and the top stores fully.
Using the Tonneau Caps
Your convertible top also includes two tonneau caps, one for each side of\
the
vehicle. You can stow these caps inside the luggage compartment.
After opening your convertible top, place the tonneau caps between the t\
op
and your vehicle trim molding by doing the following:
1. Insert the leading edge under the trim.
2. When the leading edge is under the trim slot, angle the side edge down
so the edges slide under the surrounding molding. Secure the side edge
into place between the trim edges.
3. Repeat Steps 1 and 2 on the opposite side of the vehicle to install the \
second tonneau cap.
Note: Remove the tonneau caps before attempting to close the convertible
top or a chime sounds and a warning message appears in the instrument
panel. If this happens, remove and stow the caps, and then press the
convertible top control again.
CONVERTIBLE TOP*
*if equipped13
12
*if equipped

Autowipers*
The feature uses a rain sensor that is in the area around
the interior mirror. The rain sensor monitors the amount of
moisture on the windshield and automatically turns on the
wipers. The sensor also adjusts the wiper speed by the amount
of moisture that the sensor detects on the windshield.
You can switch this feature on and off in the information display.
Note: Make sure you switch off the windshield wipers before
entering a car wash.
Autolamps
The headlamps turn on and off automatically in low light
situations or during inclement weather. The headlamps
remain on for a period of time after you switch the
ignition off.
Use the information display controls to adjust the period of
time that the headlamps remain on.
Remote Start*
Use the remote start to start the engine from outside of
your vehicle.
1. Press the lock button
to lock all the doors.
2. Press the remote start button
twice within three
seconds. The exterior lamps flash twice.
Heated Exterior Mirror*
When you switch the heated rear window on, the heated
exterior mirrors will automatically turn on.
Note: Do not remove ice from the mirrors with a scraper or
adjust the mirror glass when it is frozen in place.
Intelligent Access Luggage
Compartment Release
With your keyless remote within 3 feet (1 meter) of your
vehicle, press the exterior release button hidden above the
license plate.
CONVENIENCE
Selectable Driving*
and Steering Modes
Through a suite of sophisticated
electronic vehicle systems, you can
optimize steering, handling and
powertrain response. To change the
mode settings, use the mode switch on
the instrument panel. The first press of
the mode button or switch illuminates
the selected mode. Subsequent presses
change the selected mode. See the
Driving Aids chapter of your Owner’s
Manual for complete details.
Driving modes*
» Normal – Delivers a balanced
combination of comfort and
handling. This mode provides an
engaging drive experience and a
direct connection to the road without
sacrificing any of the composure
demanded from your vehicle.
» Sport+ – Provides a sportier
steering feel and throttle response.
Sport+ mode is ideal for use during
more spirited driving.
» Track – Provides a performance
driving experience. The engine
responds directly to your inputs
and takes on a more powerful tone.
Use track mode when you desire
pure performance.
» Snow/Wet – Provides a confident
handling driving experience during
poor weather without sacrificing
any of the composure demanded
from your vehicle.
Steering modes
» Normal – Default factory setting.
» Sport – Slightly higher effort
required for steering with more road
force felt through the steering wheel.
» Comfort – Slightly less effort
required for steering with less
road force felt through the
steering wheel.
After selecting the desired setting,
you may feel a soft feedback bump
in the steering wheel when the
changeover occurs.
Note: If your vehicle includes the
selectable drive modes feature, the
steering feel changes when you select a
new drive mode. You can override this
automatic selection by pressing the
steering button.
FUNCTION
*if equipped *if equipped14
15

Rear Parking Aid*
The rear sensors are active only when the
transmission is in reverse (R). As your
vehicle moves closer to the obstacle, the
rate of the audible warning increases.
The system detects certain objects while
the transmission is in reverse (R) and the
vehicle is traveling at a speed of 3 mph
(5 km/h) or less.
The system can be switched off through
the information display. See the Parking
Aids chapter of your Owner’s Manual
for details.
Blind Spot
Information System (BLIS®) *
BLIS aids you in detecting vehicles that
may have entered the blind spot zone.
The detection area is on both sides of
the vehicle, extending rearward from
the exterior mirrors to approximately
13 feet (4 meters) beyond the bumper.
The system alerts you if certain vehicles
enter the blind spot zone while driving.
See the Driving Aids chapter of your
Owner’s Manual for details.
Cross Traffic Alert*
Cross traffic alert warns you of vehicles
approaching from the sides when the
transmission is in reverse (R). The system
illuminates an amber alert indicator in
the outside mirror on the side of your
vehicle the approaching vehicle is coming
from. Cross Traffic Alert also sounds an
audible alert and a message appears in the
information display indicating a vehicle
is coming from the right or left. This
system also works with the reverse sensing
system that sounds its own series of tones.
See the Driving Aids chapter of your
Owner’s Manual for details.
Note: Visibility aids do not replace
the need to watch where the vehicle is
moving. Refer to the Owner’s Manual
for safety information, more details and
system limitations.
FUNCTION(CONTINUED)
Collision Warning System*
This system is designed to alert you of certain collision risks.
A radar detects if your vehicle is rapidly approaching another
vehicle traveling in the same direction as yours. If it is, a
red warning light illuminates and an audible warning
chime sounds.
The brake support system assists the driver in reducing the
collision speed by charging the brakes. If the risk of collision
further increases after the warning light illuminates, the
brake support prepares the brake system for rapid braking.
This may be apparent to the driver. The system does not
automatically activate the brakes, but if the driver presses the
brake pedal, full force braking is applied even if the driver
lightly presses the brake pedal.
You can adjust the warning system sensitivity to one of three
possible settings through the information display control.
See the Driving Aids chapter in your Owner’s Manual
for details.
Traction Control
The system automatically turns on each time you switch the
ignition on. If your vehicle is stuck in mud or snow, switching
traction control off may be beneficial as this allows the wheels
to spin.
The switch for the stability and traction control system is on
the instrument panel. When you switch the system off, a message and an illuminated
icon appear on the instrument cluster.
Use the switch again to return the traction control system to
normal operation.
Note: When you switch traction control off, stability control
remains fully active.
AdvanceTrac™
The system automatically activates when you start your
engine. The electronic stability control portion of the

system disables when the transmission is in reverse (R),
or on some models, if you press and hold the stability control
button for more than five seconds when you apply the
brakes and the vehicle is at a stop. You can switch off the
traction control portion of the system independently. See
the Stability Control chapter of your Owner’s Manual
for details.
Pony Projection Lights*
The lights are on the bottom of the mirror housings.
This feature projects an image onto the ground a short
distance from the vehicle with the illuminated entry and
exit feature.
FUNCTION(CONTINUED)
16 17*if equipped*if equipped

Fuel Tank Capacity
Depending on your engine size and type, your fuel tank size can vary. When
equipped with the 2.3L EcoBoost engine, your vehicle has a 15.5 gallon
(58.8L) fuel tank capacity. The 3.7L and 5.0L 32V Ti-VCT engines include a
16 gallon (60.6L) fuel tank capacity.
To provide improved performance, we suggest premium fuel. We
recommend regular unleaded gasoline with a pump (R+M)/2 octane rating \
of 87. Do not use E85 fuels because your vehicle was not designed to run\

on fuels with more than 15% ethanol.
Easy Fuel® System
With this system, stop your vehicle and put it into park (P). Switch the
ignition off. Push to open the fuel door, insert the nozzle and begin fueling.
Wait at least 10 seconds before removing the nozzle from the vehicle to
allow any residual fuel in the nozzle to drain into the fuel tank. When \
using a portable fuel container, slowly insert the fuel funnel (located in the
spare tire compartment), and pour the fuel into the funnel.
Note: Do not use aftermarket funnels as they do not work with the Easy
Fuel system and may cause damage. Properly clean the funnel after
each use.
Car Cleaning Tips
Do not use chemical solvents or strong detergents when cleaning the
steering wheel, instrument panel or seats. See the Vehicle Care chapter in
your Owner’s Manual for details.
Temporary Mobility Kit*
This kit provides a temporary tire repair,
allowing you to drive your vehicle up to
120 mi (200 km) at a maximum speed of
50 mph (80 km/h) to reach a tire service
location. The kit, located under the
load floor in the luggage compartment,
includes an air compressor to re-inflate the
tire and a canister of sealing compound
that effectively seals most punctures
caused by nails or similar objects. Refer
to the Wheels and Tires chapter of your
Owner’s Manual for more information.
Note: This feature is not included with
the spare wheel and tire option.
Tire Pressure Monitoring System
Your vehicle
illuminates
a low tire
pressure
warning
light
in
your instrument cluster when one or
more of your tires are significantly
under-inflated.
You can use the left information display to view the Tire Pressure On-demand
screen. It displays your current individual
tire pressures. Refer to the Wheels and
Tires chapter of your Owner’s Manual for

more information.
Manual Transmission Lockout*
Your manual
transmission features
a lockout feature that
protects you from
accidentally moving
the transmission into
reverse (R). To shift
into reverse (R):
1. Press the clutch pedal to the floor to
disengage the clutch.
2. Raise the collar below the gearshift
knob up, then move the lever fully to
the left, then forward.
Note: If you have trouble engaging the
gear, return the gearshift to neutral (N)
and then release the clutch. Repeat steps
1 and 2.
ESSENTIALFEATURES
18
18 19*if equipped19
Roadside Assistance
Your new Ford vehicle
comes with the assurance and
support of 24-hour emergency
roadside assistance.
To receive roadside assistance
in the United States, call
1-800-241-3673. In Canada,
call 1-800-665-2006.